Hi mates Zgemma H9.2H 4K excellent Box

i just received , and tested on X 2 Tivusat cards Gold and old Blu card works perfect !!

Terrestrial channels good!!

Oscam Good !!!

Excellent Box !!!

Zgemma H7C stuck in boot if usb flash drive present

replaced it with a kingston usb3 flash drive and no more issues.

please format usb to Fat 32 !!!!

tray to upgrade with open atv image

This is a very simple basic guide of how to use the Zgemma H9 Combo multiboot recovery menu to Multiboot and flash supported images online.

Note your Zgemma H9 Combo must have a hard wired network connection.

1) Power on the Zgemma H9 Combo, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON on the remote.

2) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.

3) On the next screen select 'Flash online image' and press OK on the remote.

4) On the next screen you can select various team images for online flashing. Currently OpenATV 6.2 & 6.3, OpenPLi7.x, OpenViX 5.2 and OpenNFR 6.3. Choose which image you'd like to flash and Press OK on the remote. You will then see a downloading progress screen. For the purpose of this guide we are flashing OpenATV 6.2 to Slot 2, we already have OpenViX 5.2 in slot 1, OpenATV in slot 2 that we are going to re-flash and OpenPLi in Slot 3.

5) Once the image has download you'll see the screen below giving you Four image slots. Remember which slot you are currently booting from and have setup. Flashing to that slot WILL REFLASH that slot, you will loose everything you have setup in that slot. We have setup OpenViX in Slot 1, for this guide we are re-flashing OpenATV 6.2 to Slot 2 and we have OpenPLi already flashed to slot 3. Select Slot 2 and press ok on the remote.

6) Once completed you can select which image you'd like to boot into. OpenATV is in Slot 2, select slot 2 and press ok on the remote.

7) Now if you would like to boot into say OpenViX in slot 1 you do either either use the built in Multiboot system of whatever images you have flashed or press Menu > Standby /Restart > Restart > as soon as TV screen goes blank HOLD DOWN TOP LEFT POWER BUTTON on the remote. Wait for the Multiboot recovery menu, then select which image you'd like to boot into.

Thats it, very simple and no USB sticks required.

This is a very simple basic guide of how to use the Zgemma H9 Combo multiboot recovery menu to Multiboot and flash supported images online.

Note your Zgemma H9 Combo must have a hard wired network connection.

1) Power on the Zgemma H9 Combo, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON on the remote.

2) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.

3) On the next screen select 'Flash online image' and press OK on the remote.

4) On the next screen you can select various team images for online flashing. Currently OpenATV 6.2 & 6.3, OpenPLi7.x, OpenViX 5.2 and OpenNFR 6.3. Choose which image you'd like to flash and Press OK on the remote. You will then see a downloading progress screen. For the purpose of this guide we are flashing OpenATV 6.2 to Slot 2, we already have OpenViX 5.2 in slot 1, OpenATV in slot 2 that we are going to re-flash and OpenPLi in Slot 3.

5) Once the image has download you'll see the screen below giving you Four image slots. Remember which slot you are currently booting from and have setup. Flashing to that slot WILL REFLASH that slot, you will loose everything you have setup in that slot. We have setup OpenViX in Slot 1, for this guide we are re-flashing OpenATV 6.2 to Slot 2 and we have OpenPLi already flashed to slot 3. Select Slot 2 and press ok on the remote.

6) Once completed you can select which image you'd like to boot into. OpenATV is in Slot 2, select slot 2 and press ok on the remote.

7) Now if you would like to boot into say OpenViX in slot 1 you do either either use the built in Multiboot system of whatever images you have flashed or press Menu > Standby /Restart > Restart > as soon as TV screen goes blank HOLD DOWN TOP LEFT POWER BUTTON on the remote. Wait for the Multiboot recovery menu, then select which image you'd like to boot into.

Thats it, very simple and no USB sticks required.

thanks gitrix i tested come with error

timecop here is

Boss020202 here download http://download698.mediafire.c…20170905.174619.V0619.img

Marzotto74 guarda il video come fai a lavorare con Cccam

Hi Mates here will be support section for this box

original softcam and appinstaller

here is the video how too get access on oscam emu cod is 111111

hai123 hi mate i need the software i have problem with my box sent too my i will test

MECOOL M8S PLUS ANDROID 9.0 TV BOX DVB-S2 HYBRIDTV AMLOGIC S905X2 QUAD CORE 2GB 16GB

hi mates im looking for back up or original software for

MECOOL 2020 NEW M8S Plus DVB S/S2 Android 9.0 TV Box Amlogic S905X2

Hi. I just bought Mecool m8s plus with dvb-s2/s2x and there is problem with signal . Signal null , quality null. The dish is set properly. I've reconnected cable from working box. Any ideas? Thx.

braswilis same problem here im thing is the DTV apk

i back up my DTV apk dont work

installation remot control 111111 Smart data Manager

yes mate from the original sxxxx decoder then convert snxxxxxxxx and box id xxxxxxx to hex decimal after

use the box ID hex decimal on to you emu on your duo

here is info box id from your original box

yes works only on modul C+

hi mates i just receive the latest tivusat card
test on Zegemma H9 twin

test on card reader dont work:whatthefuck:

test on openatv image dont work:whatthefuck:

test on openesi image dont work:whatthefuck:

test on egami works :thumbup:

all 4k channels ok :):thumbup:

albakos i dont no mate , i have only Zegemma h9twin and h7c

@ gorski hi mate i change the skin but problem still the sime

Zegemma 9h Twin

tivusat card reader 4k rai ok

pairing conax C+ ok

the problem is channel list stick on page when move up down