free no
Posts by esmeralda1
-
-
here is ip tv m3u free your contry channels file for you use on pc vcl plyer or on your box
-
here is how to change
i had problem with fresh start on openatv image loogin
-
soon mate i will informe you when
-
use putyy and change the pasword too new one soo log your ip enigma stb ( loog root ) pass with ( passwd) and insert yur new pasword
6.4 image works perfect with no problem the image has pasword
-
here is the rite config works perfect just insert your lines on the xxxxx
[reader]
label = xxxxxx
protocol = cccam
device = xxxxxxxxx
user = xxxxxxxxxx
password = xxxxxxx
disablecrccws_only_for = 098C:000000,09C4:000000,0E00:000000
inactivitytimeout = 30
group = 1
cccversion = 2.2.1
cccmaxhops = 3
ccckeepalive = 1
audisabled = 1
disablecrccws = 1
-
-
@ Narso flash here works for my http://images.mynonpublic.com/…dex.php?open=zgemmah9twin
-
Good newsEgami 9.0 OE-A 4.3 Pre-Release
====> COMING SOON <====
-
-
This is a basic guide to USB flash a local image zip file to the Zgemma H9 Combo +TWIN.
User will require a USB stick formatted FAT32.
1) Download your chosen image.
2) Transfer the complete zip file to root of the USB stick. Do not unzip the file.
3) Power off the Zgemma H9 Combo and connect the USB stick front USB port behind front flap.
4) Power on the Zgemma H9 Combo, as soon as you power on HOLD DOWN reset black baten on the back
5) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.
6) On the next screen select 'Flash local image' and press OK on the remote.
7) On the next screen you select the USB stick where your image zip file is located.
8) On the next screen you'll then select the zip file that's on your USB stick that you'd like to flash and press OK on the remote.
9) You'll now select which slot you'd like to flash your image to. Remember which slot you are currently booting from and have setup. Flashing to that slot
WILL REFLASH that slot, you will loose everything you have setup in that slot
. We have setup OpenViX in Slot 1, for this guide we are re-flashing OpenViX in slot 1, OpenATV 6.2 is in slot 2 and we have OpenPLi already flashed to slot 3. Select Slot 1 and press ok on the remote.
( unzip only one file _recovery_emmc.) second file dont uzip send on usb like is
-
This is a basic guide to USB flash a local image zip file to the Zgemma H9 Combo +TWIN.
User will require a USB stick formatted FAT32.
1) Download your chosen image.
2) Transfer the complete zip file to root of the USB stick. Do not unzip the file.
3) Power off the Zgemma H9 Combo and connect the USB stick front USB port behind front flap.
4) Power on the Zgemma H9 Combo, as soon as you power on HOLD DOWN reset black baten on the back
5) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.
6) On the next screen select 'Flash local image' and press OK on the remote.
7) On the next screen you select the USB stick where your image zip file is located.
8) On the next screen you'll then select the zip file that's on your USB stick that you'd like to flash and press OK on the remote.
9) You'll now select which slot you'd like to flash your image to. Remember which slot you are currently booting from and have setup. Flashing to that slot
WILL REFLASH that slot, you will loose everything you have setup in that slot
. We have setup OpenViX in Slot 1, for this guide we are re-flashing OpenViX in slot 1, OpenATV 6.2 is in slot 2 and we have OpenPLi already flashed to slot 3. Select Slot 1 and press ok on the remote.
( unzip only one file _recovery_emmc.) second file dont uzip send on usb like is
-
hi is on sale aliexpress costs 100 £ and dont forget the customs charge 20 pound , you can get one original one for 99 £ from www.world-of-satellite.co.uk
-
Hi mates i just receive the Zgemma H9 Twin From world of satellite store excellent sellers ,
i have test with diferent images and the box works perfect
i testet on Tring digital ,digitalb , and tivusat with offical cards and pairing C+ conax module
-
hi mates here is Freeserver 4.8 on 2 formats with 45 wget
-
here is free server on 2 formats wget testet and works
-
tray with egami image
-
hi mates i have test zegemma H7C Egami image on C+ pairing conax modul and working fine
-
zegemma h7C works perfect with egami latests image
-
Here is for arm+mips works on zegemma h7c egami