use this tool too update you box and google how too use ok
Posts by esmeralda1
-
-
I have tried both dvb-t2 and dvb-t and the same.
Automatic scan, manual scan.
tray with diferent image ,
-
Display More
Thank you all for your help.
Albanian is not listet at terrestrial.xml file but usually we use the first one Europ middle East, Africa and all the transponer we need are there.
When i do automatic scan with my tv or with my zgeemma h5 everything is ok and in the and are listed 150 channel.
When i do the same thing with zgeemma h7 in the end are listed only 97 channel.
I have use the terrestrial.xml from zgemma h5 and again the same result.
I used the terrestrial.xml from Esmeralda and again the same result.
It seems like zgeemma h7 scan all the tranponders but no signal for canal 41 and for some others which i don't need.
I tryed to copy directly bouquet from zgeemma h5 and paste in to etc/enigma2 but no signal for those channels.
I uset also a usb t230 tuner which at zgeemma h5 is ok but not at zgeemma h7.
I use the same cable with zgeemma h5 and the result is different.
I tried to flash different rom but no luck.
It's saunds very strange to me all this, and i don't know what to do any more.
If someone has any idea what to do next please help me.
hi mate DVB -T is standard sd DVB T2 is HD im thing all the albanian channels are on HD i can see on the photo System is set up on DVB-T can you change thats settings too DVB-T2
-
Albanian
hi mates here is my receiver file i use only uk full and italy full all the rest has been delited.
too get albania terestrial channels use the first one woonder uk the albanian frequency start fom channel 21 to 41 !!! i hoope will work for you all the best
-
which country mate ? is terestrial
-
Display More
hi
Today i bought a zgemma h7c box. I made a automatic scan but not all the channels wer listed.
I have another zgemma h5 and this box is ok with all channels.
I tryed diferent images Atv, openpli, openspa, openhdf but i didn't resolve the issue.
I tryed also with t230 usb tuner which at my zgeemma h5 go well but at this box the same issue, some channel after scan are not present!
Can help me some one, can i do something to resolve this issue?
Hi the problem is the xml file the file mising transpondres you can can update the file using ftp and the latest xml update
-
Do you support ci+ modules...
yes supports
-
works here all ok thanks
-
working super all nagra powervue biss all ok on egami image thankyou
-
Code
nice work , how to config ncam for TRING , HELP ME PLEASEyou have to subscribe with Tring mate , conax is pairing the dont work on Ncam
-
Code
Nice work mate, btw which skin you use, looks very neat?egami ODreamy-FHD skin 8.0
-
OE2.0 enigma2:
opkg remove enigma2-softcams-oscam-all-images
OE2.5 DreamOS:
dpkg -r enigma2-softcams-oscam-all-images
NOT:
This should fix the rare crash at OSCam-Emu startup when two or more Emu readers are configured. If the issue remains, please report back!
Bu, iki veya daha fazla sayıda Emu okuyucusu yapılandırıldığında OSCam-Emu başlangıcındaki nadir çökmeyi gidermelidir. Sorun devam ederse, lütfen rapor verin!
B*SS OK
P-Vu OK
Astra 4.8°E DISCOVERY EUROPE
12322 V 27500
Astra 4.8°E Discovery-Networks
12360V 27500
Thor1°W Discovery-Networks
12303-V-27500
Eutelsat 9.0°E AFN
11804-V-27500
-
Code
Display More#### "*********************************************" #### "* ncam.conf generated automatically by NCAM *" #### "*********************************************" [global] logfile = /tmp/ncam.log clienttimeout = 12000 fallbacktimeout = 3000 bindwait = 60 netprio = 1 nice = -1 maxlogsize = 1024 waitforcards_extra_delay = 200 preferlocalcards = 1 usrfile = /tmp/ncamuser.log cwlogdir = /tmp/cw readerrestartseconds = 1 dropdups = 1 block_same_ip = 0 block_same_name = 0 lb_nbest_readers = 6 lb_nfb_readers = 6 ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j failbantime = 1440 failbancount = 2 [anticasc] enabled = 1 numusers = 1 samples = 5 penalty = 1 aclogfile = /tmp/aclog.log denysamples = 4 [cache] delay = 100 max_time = 30 max_hit_time = 60 cacheexenablestats = 1 csp_allow_request = 0 csp_allow_reforward = 1 cacheex_cw_check = 05@032830:88:2000,05@030B00:88:2000 csp_block_fakecws = 1 cwcycle_check_enable = 1 cwcycle_check_caid = 0500,0100,1811 [cs378x] port = 13001@1811:3600,3315,3311 suppresscmd08 = 1 [newcamd] port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF key = 0102030405060708091011121314 mgclient = 1 [cccam] port = 9000 nodeid = 43F7DDF9102A157E version = 2.3.0 reshare = 0 reshare_mode = 0 stealth = 1 [streamrelay] stream_relay_enabled = 0 stream_emm_enabled = 117440512 [dvbapi] enabled = 1 au = 1 pmt_mode = 0 delayer = 60 ecminfo_type = 1 user = root read_sdt = 1 write_sdt_prov = 1 extended_cw_api = 2 boxtype = dreambox [webif] httpport = 8181 httpuser = root httptpl = /etc/tuxbox/config/tpl/ httprefresh = 30 httpshowmeminfo = 1 httpshowuserinfo = 1 httpshowcacheexinfo = 1 httpshowecminfo = 1 httpshowloadinfo = 1 httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,255.255.255.255 http_status_log = 1 -
Tivusat Card works and Conax 7 works Egami image Zegemma htc7
-
works here on Egami image on conax 7 and on tivusat 4k
-
TivuSat Card HD 4k internal card reader ,works on my receiver
add this script on ncam.server
[reader]
label = Tivusat
protocol = internal
device = /dev/sci0
caid = 183E
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
detect = cd
mhz = 500
cardmhz = 800
group = 4
emmcache = 1,3,2,0
blockemm-unknown = 1
-
hi mates im using zegemma h7c with official Tivusat card on oscam 11.434 emu works exellent
here is the script
please add this script to oscam .server
Code
Display More[reader] label = Tivusat protocol = internal device = /dev/sci0 caid = 183E rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5 detect = cd mhz = 500 cardmhz = 800 group = 4 emmcache = 1,3,2,0 blockemm-unknown = 1 -
i give up on this receiver gtc i dont have this box anymor
-
-
thanks excellent work on zegema h7c
