Posts by Panda555

Which files you add into usr folder? If you have Octagon 4K you must put ARM oscam folder to usr foder.

Here, in attach you will find oscam config for OpenATV image.

Unzip this file with 7-zip.

I installed BH 4.7 image for DM800SE original. For now everything is working properly.

Installed too E2iplayer and oscam-emu, and both working without problems.

My question is, cannot find Temperature fan control , and which instead can install.

Im trying to find it HD skins with weather, and which other skins are compatible for this image.

Thank you for answers.

Regards

With the last oscam-emu there are some problems.

Install an earlier version , 11500 , 11501.

In my box is version 11501, and work OK.

As far Powervu on Discovery on 4.8E problem is with EMM keys. Here it is seen that it has

retracted the same keys for both frequencies ( 12322 V and 12360 V )

P 5E0064 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E00C8 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E012C 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E012D 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0190 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0384 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E03E9 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E044C 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0514 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E05DC 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0320 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E06A4 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0708 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0C1C 00 FD3002EF506526 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0064 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E00C8 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E012C 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E012D 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0190 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0384 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E03E9 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E044C 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0514 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E05DC 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0320 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E06A4 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0708 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

P 5E0C1C 01 39D9676744C5F5 ; added by Emu Mon Feb 18 11:09:55 2019 UA: 0061CB56

Now you can watch programs from 12360 V after AU keys, but not with 12322 V

because they are the wrong keys after AU.

5E0064 - 5E0514 - 12322 V - wrong keys

5E05DC - 5E0CIC - 12360 - OK

The same and vice versa.

I think that is not a problem in oscam config than is EMM keys.

Regards

And me is also the same problem. I read in another forum that is a wrong

update EMM keys, and lately they are changing keys almost every day.

This refer to 4.8 E 12322V 27500 AU not working , or it takes a

lot of time for make AU on properly way.

Thank you, and Im glad you solved the problem.

I searched on net, these files can be found on github for different images,

but I dont know if they are valid for all images.

Did you have timezone.xml in etc/tuxbox/timezone , and whether it is showing all time zones.

I read on another forum , Skylink ICE card has some protection

and can not be read via emulators, only over original box.

Try putting this configuration

Maybe will be better.


oscam.server
[reader]

label = Skylink_IRDETO

protocol = internal

device = /dev/sci0

caid = 0624

boxkey = ...

rsakey = ...

force_irdeto = 1

ecmnotfoundlimit = 5

detect = cd

mhz = 450

cardmhz = 2700

ident = 0624:000000

group = 1

emmcache = 1,1,2,0

disablecrccws = 1

Whether you card is updated every month?

Maybe in the oscam card reader settings something

is not well configured

I have DM800SE. I installed it python-pyexecjs and nodejs in USB, but not working.

I made this path, but I do not know if it is correct.

mv /mediaportal_rootfs /media/usb/mediaportal_rootfs

mkdir -p /media/usb/mediaportal_rootfs

ln -s /media/usb/mediaportal_rootfs /mediaportal_rootfs

How to set the correct path to USB. Free space in flash is not enough.

Thanks

I have DM800SE. I installed it python-pyexecjs and nodejs in USB, but not working.

I made this path, but I do not know if it is correct.

mv /mediaportal_rootfs /media/usb/mediaportal_rootfs

mkdir -p /media/usb/mediaportal_rootfs

ln -s /media/usb/mediaportal_rootfs /mediaportal_rootfs

How to set the correct path to USB. Free space in flash is not enough.

Thanks

Can you explain, which oscam version you have, and how it looks oscam configurations.

Open Putty and first of all you must do this path.

mv /iptvplayer_rootfs /media/usb/iptvplayer_rootfs

mkdir -p /media/usb/iptvplayer_rootfs

ln -s /media/usb/iptvplayer_rootfs /iptvplayer_rootfs

When you do it, then follow the instruction as in the post #14.

I have also DM800SE and all works fine.

Which channel you want watching

Which version Oscam you downloaded?

Whether it was with OpenATV softcam feed or somewhere else

oscam.conf is not good

Regards

After mount USB to /media/usb, I connected to Totalcommander

and now flodder and swapfile are in media/usb directory.

I added other folders in media/usb ( picon, mediaportal, music and IPTVCache).

In the meantime I installed oscam emu and added my config and works OK.

About zap mode still same problem. Do you have it in Channel selection settings

this option in your image in your box, because there are no option in my image.

Maybe are developers forget implemented for DM800SE. For about record on usb I never recording.

One question , why mount USB stick as /media/hdd and not as /media/usb.

How to mount as /media/usb/flodder as you explained on other forum (HDSC).

Sorry, you not answer me about no existing option 3rd page - Zap mode - Black screen

After mount to USB looks Flash 7.1 GB in use 16% 6098 free

Extern: Kingston 7750 GB , 6 GB free.