Hello.
set top box : Formuler F3
chipset architecture : mipsel
e2 : OpenATV 6.2
card : Skylink ICE (CAID:0624)
crypt.system : IRDETO
card reader : internal (UNI)
oscam : 1.20_svn, r11487
Does the card lose its EMM records (at least explain it myself) after about 3-5 hours, from the last-watched Skylink channel?
I tried to add another item needsemmfirst = 1 to the Oscam configuration under the internal reader section, but this item did not affect my problem. Means waiting for the first EMM records to arrive when the card is initialized to enable the card to start decoding in IRDETO (to initialize the card).
Sometimes I read that for the IRDETO mode it is necessary to first accept some EMM entries and then the IRDETO card starts (after rebooting, for example). However, why about 3-5 hours after turning off the set top box or of the monitored satellite channel, Oscam stops reading + decoding + writing EMM to the card and it happens that the card suddenly has no EMM? It seems to me that from my layman's point of view, as if the card went into a standby mode - it would lose all its data. And then, after few hours, no EMMs are received, the card must be re-initiated / reinitialized by adopting new EMMs. This takes 10-30 seconds before any new EMM entries arrive to re-initialize the Skylink ICE card. Then IRDETO works the way it belongs.
If I turn off the satellite channel or box and return to the satellite channel after about 1 hour, initialization is not needed. As soon as the channels that I switch to begin decoding without waiting for EMM. If this time is longer, about 3-5 hours. so then I have to wait for 10 seconds to 30 seconds before the card reinitializes (before an EMM arrives and I write to the card).
From the Oscam configuration I tried to remove all restrictions as well. filter for specific CAID 0624 (i.e., .dvbapi / .user. / .server), but this also has no effect on my problem. Nothing has changed and it still does not work.
If I use the old Cryptoworks (CW) mode, all of this works, because CW does not have to wait for the card to be initialized with EMM records. In CW mode, the card works immediately after rebooting Oscam. This would be the case with the Irdeto mode :(.
Would anyone know what to do about this? I will add peacefully to my Oscam configuration files, but I do not know if you need it. I have not added anything to the configuration, nothing unnecessary about what I would not know, what it is or what might even marginally relate to the mentioned problem. Of course, if you need, I'll put the configuration files into this discussion.
Thanks.
2019/01/30 12:12:49 0BAA7632 c (dvbapi) Warning reader interna_citacka_sci0 received no emms for the last 29533 seconds -> skip, this reader needs emms first!
2019/01/30 12:12:49 0BAA7632 c (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 1BEE PMTPID 1BE4 (NO MATCHING READER)
2019/01/30 12:12:49 5C023A3F r (reader) interna_citacka_sci0 [irdeto] lokalne_pripojenie emmtype=global, len=30 (hex: 0x1E), cnt=0: error (40 ms)
2019/01/30 12:12:49 0BAA7632 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2019/01/30 12:12:49 0BAA7632 c (dvbapi) Warning reader interna_citacka_sci0 received no emms for the last 29533 seconds -> skip, this reader needs emms first!
2019/01/30 12:12:49 0BAA7632 c (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 1BEE PMTPID 1BE4 (NO MATCHING READER)
2019/01/30 12:12:50 0BAA7632 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2019/01/30 12:12:50 0BAA7632 c (dvbapi) Warning reader interna_citacka_sci0 received no emms for the last 29533 seconds -> skip, this reader needs emms first!
2019/01/30 12:12:50 0BAA7632 c (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 1BEE PMTPID 1BE4 (NO MATCHING READER)
2019/01/30 12:12:50 0BAA7632 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2019/01/30 12:12:50 0BAA7632 c (dvbapi) Warning reader interna_citacka_sci0 received no emms for the last 29533 seconds -> skip, this reader needs emms first!
2019/01/30 12:12:50 0BAA7632 c (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 1BEE PMTPID 1BE4 (NO MATCHING READER)
2019/01/30 12:12:50 0BAA7632 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
2019/01/30 12:12:50 0BAA7632 c (dvbapi) Warning reader interna_citacka_sci0 received no emms for the last 29533 seconds -> skip, this reader needs emms first!
2019/01/30 12:12:50 0BAA7632 c (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 1BEE PMTPID 1BE4 (NO MATCHING READER)
2019/01/30 12:12:50 0BAA7632 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2019/01/30 12:12:50 0BAA7632 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 1BEE ANY CHID PMTPID 1BE4 VPID 1BE5
2019/01/30 12:12:50 0BAA7632 c (ecm) lokalne_pripojenie (0624&000000/0000/3398/6A/1BEE/0003/0000): found (95 ms) by interna_citacka_sci0 - J@J HD
2019/01/30 12:12:58 0BAA7632 c (ecm) lokalne_pripojenie (0624&000000/0000/3398/6A/1BEE/0003/0000): found (94 ms) by interna_citacka_sci0 - J@J HD
2019/01/30 12:13:13 0BAA7632 c (ecm) lokalne_pripojenie (0624&000000/0000/3398/6A/1BEE/0003/0000): found (95 ms) by interna_citacka_sci0 - J@J HD
2019/01/30 12:13:23 0BAA7632 c (dvbapi) Demuxer 0 stop descrambling program number 3398 (J@J HD)
Display More