Posts by Panda555

  • OSCam-ICam For SKY IT, UK, DE

    I think that is problem in installed oscam. Uninstall this oscam and see if you can access oscamwebif. Also , for this oscam or ncam

    you need some libraries who you can't install , because is your image old. If you want to have still openpli image , install v.11.3.

    I also installed this image in my box , but I installed ncam emu and work well for sky icam.

  • info correct installation and configuration of the motorized dish

    With a dish of 80 cm the signals are excellent. When you mounted the 100 cm dish, did you place it exactly in the same place with the same elevation angle as with the 80 dish. Try to move the 100 dish a little left and right, but only a little to get a better signal. Also, with a dish of 80, search for some other satellites such as 0.8 W, 7W, 28.2 E, 42E and some further east. Is your engine tilt angle and antenna elevation the same as in the instructions (engine tilt angle 40.5 and elevation 49.5) or some other.

  • VU+ SOLO

    I also installed PLI image , but on DM800SE with similar problem as you. Install from here using putty and will work 100 %.

    Through installation will ask you what you want to install ( latest oscam or ncam emu ) . Uninstall the oscam and ncam you installed before.



    Quote


    python -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Download/main/Emu/installer.py -qO -)"

  • OSCam-ICam For SKY IT, UK, DE

    Here is corrected for SuperTennis HD. Correct TSID 0X1AF4 must be added from both sides.


    Quote


    #SERVICE 1:0:19:2C29:1AF4:FBFF:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a19%3a2C29%3a1AF4%3aFBFF%3a820000%3a0%3a0%3a0%3a:SuperTennis%20HD

    #DESCRIPTION SuperTennis HD

  • OSCam-ICam For SKY IT, UK, DE

    Some channels included in the skyit package work with caid 183D and can therefore be watched ( cielo HD , TV8 HD , VH 1 Italia HD , TV2000 , Explorer HD, etc...) which you can open with clines.

    In the list I use ( ciefpsettings ) there are Italian channels from the Polish transponder ( 11258 H 27500 ) which should not be in the list but also work with clines.That's why you can watch those channels.


    jenseneverest


    aware... this sd channels not work.


    samur


    How is it that only Sky Sport Tennis works, and the other channels in the package do not.

  • OSCam-ICam For SKY IT, UK, DE

    You must know one thing. For now, it is not possible to open skyit via streamrelay, except for those few channels, and I explained why that is so. Rare providers (clines) have a 09CD card, and even those who have it, the question is whether it would work (good and bad sides of the law). Even if you buy a line the question is whether you will be able to watch skyit at all. Unfortunately, we have to be patient and see how the situation around skyit will develop further. Here isn't problem with oscam icam and streamrelay , because both it works well for skyde

    and skyuk ( partially for skyuk )

  • info correct installation and configuration of the motorized dish

    Here is something wrong. I see that is motor elevation more than 40. Your latitude is 40.17 and on motor must be also40.

    Also , your dish elevation is too high . In your post #97 if is calculated elevation 43 must be 43 and not 49.5. How I mentioned

    before the motor and the dish , both must have same direction or be in the same line on 16 E satellite. You must move

    both , motor and dish together. Probably is also problem because you can't access motor from behind.

  • AddKey aka Biss Key Editor PLUGIN [OE2.0 OE2.5]

    Install the Ncam emu again and copy in oscam.server these two readers


  • info correct installation and configuration of the motorized dish

    The declination angle is a technical parameter and cannot be adjusted as such. Only the bracked angle of your longitude on the motor and the elevation angle of the dish are needed. Only with these two parameters you can improve the signal. I hope you are doing well. For the LNB, it is recommended to be as far from the center of the dish as possible (forward/backward movement) on bracket if it has any effect, but it is usually placed somewhere "in the middle".