Many, as I have 12 LNBs, so some 14 satellites... from 39E - 30W.
Posts by gorski
-
-
So, just one partition per image? I think I can manage to partition it in 2-3 parts with my SW, thanx...:rasta2bigsmoke0gf1:
But why did it not install in my test?:unhappy1:
-
I didn't see the link to your tutorial in the top post, so thanx for that!
I did unzip it, as I wrote in my post... And I made a 3GB partition but the plugin doesn't know how to partition that space?! We should make 9 (8 + a Swap partition?) or 10 partitions (1 more for new installations?), then? What's the deal with that? For each image 8 or more partitions on a USB stick? If so, that's not very elegant...
I have to study it when I have some more time, this was a quick install...
-
Some TUTORIAL would have been good... as in SIMPLY worded, short informative sentences, with some images...
Installation is typical: ipk to /tmp and install via RCU...
Configuration is more complex... depending on one's needs... Let's say installing multiple images to a USB stick...
32GB USB stick partitioned into 2:
3GB as media/usb
29GB media/hdd
Send an unpacked/decompressed image to /usb partition of the USB stick, for instance.
Start the plugin > Select Mode > installing > OK > choose /usb partition where the image is > choose the image > you will be guided to the image to install, just keep pressing OK button and then installation begins (it's fast).
Go to Select Mode again > Multiboot > Select the source partition > enigma2 (your /usb partition)
And so on and on... I tried installing, mounting or repacking - nothing worked...
Not an expert, me... Must ask our coders.....
-
Tried again in JD but not booting into the image I choose...
In this case OpenATV is installed in flash and PurE2 v. 6.3 in OPDBoot but can't boot into PurE2, whatever I do...
After I choose, the box reboots but not to what I choose, just goes back to OpenATV in flash...
-
M8, I have reinstalled everything, this time OpenATV in flash, installed NeoBoot by you, updated it, mounted a USB stick and put 3 images in the ImagesUpload folder - and the plugin can not see them, so I can't install anything... I have no idea what or how this is happening but there it is...
"No device found suitable for installation" but the USB stick in EXT4 is mounted etc. ("Working location: /media/hdd/"). Of the 3 options given only no. 1 works, 2 and 3 do not.
I will now install PurE2 6.3 in the flash and try again...
-
Hi,
I have one question regarding picons : what is the best picon size for Estuary skin ?
I use these picons, m8... All fine... ;) Put them on a USB stick or mSD or SSD but not on an HDD... :)
Use 7-zip to decompress... :)
-
I will test for you, m8! ASAP...
Thanx!!!!!
-
Viper 4K 51 image ==> 6.5 version.
-
Delfi says:
Gigas 4K reported OK with new Kodi 18.x.
6.3
Timezone default fixed... Ehh, well :)
All the images probably by the end of the day.
Some misc updates in helper functions for pure2 plugins refreshed...
Note:
Viper 4K 51 image only in 6.5 version -
Oh, so you lose an argument backed up with evidence and you both deny evidence and start offending me and PurE2 to "cover up" for your intellectual laziness?!? Nice...
OK, in that case, let me be clear: you could have read a bit on the forum and not embarrass yourself like this needlessly...
This is not the only thread contradicting you: OSCam Emu Config Mario for all PV providers - some are even AU (VERY LOL, INDEED!
)So, unlike you I have evidence - the image above tells you what and where, how...
Oh, and the above image is transparent 50%, so you can actually see that there is an image, decrypted...
Here is another one... I have enough signal to prove it, even if you are lazy to read a bit...
-
LOL, I'm afraid, is on you...
Why on Earth would you think I do not "test" and do not know this but somehow you are the only one who knows
(LOL indeed :rasta2bigsmoke0gf1:)? Here is just one example...
FYI, one provider on 9E is not working but 2-3 others are (4.8E, 0.8W etc.). Get it?:hello
-
-
8.05 updated online to 8.17.
However, in James Donkey HD Duo - doesn't work...
-
Online also faulty/non-functional with BSODs, no images to install...
-
No can go, says Ruspi, as the image extension for DM820 is awkward... If he zips an image, it still isn't installed, sadly...
-
Managed to install the plugin on James Donkey HD Duo... DLed additional packages but then... CANCELLED as "incompatible box..."
-
James Donkey HD Duo
PurE2 6.3 in flash.
After installation of the plugin to first partition, the box does boot, suggesting that it might work after all...
However, at the moment JD's drivers etc. leave a lot to be desired, so the mount manager loses the mounts and I must redo it, so I can start testing the plugin itself... But it just can't mount them properly...
So, I had to reinitialise the USB stick, 1 partition, Automount to ON, mounted as /hdd and only then it worked...
However, BSOD when I try to install an image from the authors of the plugin online...
It just does not work, it can not see even OpenATV image for it....
-
QuoteDisplay More
NFR4XBoot-opennfr-6.4
OPDBoot-opendroid-7.0
Use only one of the two Plugins as per your choice. The two equals
After unzip One of the two files that you choose to use
Plugins Folder Named NFR4XBoot or OPDBoot transfer by program dcc to following the path
usr /lib/ engima2 / python / Plugin / extensions
And transport the two file to the path / sbin
Then Exit & restart your receiver
After the reboot , you will find Plugin in the main menu and Plugin list
Remember First you have to Divide your external flash with any program you like, and to which number you prefer a search that is one of the Partition Swap fat 32 And the rest of Partition ext3
It's a bit of a nightmare, without any instructions, soooooo, let's kill our time a bit....:rasta2bigsmoke0gf1:
Alien2/STi7162
PurE2 (minimal installation, no FNC plugins, no channel list etc.) in the flash
As above: NFR4XBoot decompressed on my laptop and then use FileZilla Client to copy it...
-main folder goes to usr/lib/engima2/python/Plugin/extensions
-the other 2 small files go to /sbin
Preparation: you can partition a USB stick (I am using Toshiba 32GB) into 2 but both partitions ought to be EXT4. FAT32 (as suggested) is not recognised as valid format by the plugin.
I will use a smaller 2GB partition for the plugin and the other partition as /media/hdd.
But how does one do it? No instructions...
Let's try by similarity with OMB... let's see... images speak louder than words.... After reboot...
A word of warning - in Alien2/STi 7162 it does NOT work!!!
Good luck with your box...
-
Delfi says:
"6.3
Maintenance update. filme, serien, hamster from Franc. WebIf.
Misc plugins like youtube-dl, and some others.Should be in all the feeds by the end of the day."
