Posts by gorski

    FFS!!!!


    https://www.bbc.co.uk/news/uk-wales-51206752

    Gerald Corrigan 'shot with crossbow' while fixing satellite dish

    (From top left) Gavin Jones, Darren Jones, Terence Whall and Martin RobertsImage captionGavin Jones, Darren Jones, Martin Roberts and Terence Whall have denied the charges


    A 74-year-old man was "callously" shot with a crossbow after going outside in the dark to fix his satellite dish, a murder trial has heard.


    Mold Crown Court heard someone was hiding "probably behind a wall" armed with the "silent, quick and deadly weapon", waiting for Gerald Corrigan.

    He died three weeks after the 19 April shooting at his remote Anglesey home.

    Terence Whall, 39, denies murder, telling police he was in a nearby field having a sexual encounter with a man.

    He also denies a charge of perverting the course of justice, along with three others, amid allegations they conspired together to set fire to a vehicle later found burnt out.

    The other three - Martin Roberts, 34, of James Street in Bangor, Darren Jones, 41, of the Bryn Ogwen estate at Penrhosgarnedd and Gavin Jones, 36, of High Street, Bangor - also deny the charges.

    Jurors heard Mr Corrigan lived with his 64-year-old partner Marie Bailey, who had multiple sclerosis, and that he was in effect her carer.

    They lived at Gof Du, situated in about 30 acres near South Stack, close to the coastal path.

    "It isn't a place that you could simply pass by - to go there, you had to intend to go there," prosecution barrister Peter Rouch QC said.

    According to details retained by Sky, at about midnight Mr Corrigan was watching a recorded programme. Gerald CorriganImage Image captionGerald Corrigan died three weeks after being shot outside his Anglesey home

    Some time between 00:08 and 00:28 BST, the Sky signal was interrupted and Mr Corrigan went outside to look at the dish.

    The court heard the outside security lights had not worked for the best part of 18 months.

    The prosecutor said: "He must have bent over the Sky dish, with his right hand resting on the house wall. This must have occurred within a minute or so before 12:30am.

    "He felt a terrible pain to his body and thought that somehow he had been electrocuted by the Sky dish.

    "He suddenly had a bleeding and broken arm, which he thought was part of the electrocution," he explained.

    The court heard the bolt entered his left hand side, passing completely through his body, cutting his spleen and penetrating his large intestine and stomach.

    It also caused damage to his gastric artery, penetrated his liver, colon and diaphragm, and bruised his heart, before exiting his body more or less through his right chest.

    'Heart attack'

    "So silent and quick is a crossbow that Mr Corrigan had no idea what had happened to him. All he knew was that he was in terrible pain," Mr Rouch said.

    "He went back into the house and shouted loudly for his partner, managed to walk up the stairs, where she saw he was in lots of pain, bleeding heavily from his arm and was very frightened.

    "Mr Corrigan said he thought he had been electrocuted by the Sky dish, and thought he was having a heart attack," he said.

    Jurors heard a paramedic using a torch noticed the gate to a neighbouring field was open and also found an arrow on the grass which appeared to be covered in blood.

    Mr Corrigan received emergency surgery at Ysbyty Gwynedd in Bangor, which included the removal of his spleen and surgical repairs to the damage to his colon and stomach, and was placed into an induced coma.

    He was airlifted to the Royal Stoke Hospital but died on 11 May.

    Mr Rouch told the jury the shooter was about 10m (32ft) away and would have to have been proficient in using a crossbow, while considerable planning - including angles and distance - would have been needed.:shocked3::zip it::censor:

    I demonstrated to Air Digital guys the difference between Xtrend/ET10K (Broadcom) and Zgemma (HiSIlicon) colours etc. on the same full HD Panasonic 3D TV, with both STBs on default settings only...


    They had words with HiSilicon after that and changes to the default settings etc. ensued... It is better now, sure - it's very, very good, yes - but... not so sure as you are... It may be personal, dunno...

    P.S. I am just testing HiTube 4K Combo little rec (HiSilicon SoC) with PurE2 v. 6.3 and Ciefp's channel list. At the bottom of his Favourites list there are a MIX of IPTV channels and Original and Exteplayer3 were not playing, for instance, HRT 1 - 4 but GSTplayer did... Then I put it back to Original and it started playing it...


    Enigma2 is just that sometimes - an enigma...

    I am but a poor amateur but... I have a suggestion re. streaming and this...


    Have you tested Service App > 3 options it has?


    PurE2 > MENU > Setup > System > Service App:


    1) original

    2) serviceapp > exteplayer3

    3) serviceapp > gstplayer


    After you change to another option you must RESTART!


    Play around and see, if you haven't already...


    I also think H7 is a better all rounder (:beer1:!!!) with one difference: image on my Panasonic UHD TV is second to none! :rasta2bigsmoke0gf1:


    Good luck!:thumbup:

    We have 2 partitions only PurE2 Chef's special again, in version 6.3 here: http://www.pur-e2.club/OU/imag…irdigital/H7-2partitions/ - tested by yours truly...:rasta2bigsmoke0gf1:


    Quote

    Zgemma H7 image with only two, bigger partitions in flash (cca 1.5GB)


    To use it, it is necessary (only once) to flash this image via USB and the button on the front panel.


    After this you can freely flash images on-line (from SW manager or pure2 manager) in STARTUP_1 or STARTUP_2.


    Once you do it you can install PurE2 v. 6.3 via pManager > SW Manager > Flash on the fly > blue button (Switch to 6.5) > rock'n'roll...:beer1:


    (So, by default Zgemma H7 has 4 partitions. This unique image repartitions the eMMC/flash. It must delete everything on it in order to make a new partitioning system with only 2 larger partitions.


    To return to 4 partitions in Zgemma H7 Flash, one uses a "normal" image, which repartitions the H7 Flash to its default 4 partitions, deleting the previous partitioning system and everything on the flash/eMMC.)

    We have 2 partitions only PurE2 Chef's special again, in version 6.3 here: http://www.pur-e2.club/OU/imag…irdigital/H7-2partitions/ - tested by yours truly...:rasta2bigsmoke0gf1:


    Quote

    Zgemma H7 image with only two, bigger partitions in flash (cca. 1.5GB)


    To use it, it is necessary (only once) to flash this image via USB and the button on the fornt panel.


    After this you can freely flash images on-line (from SW manager or pure2 manager) in STARTUP_1 or STARTUP_2.


    Once you do it you can install PurE2 v. 6.4 via pManager > SW Manager > Flash on the fly > blue button (Switch to 6.4) > rock'n'roll...:beer1:

    Hi!


    I can't find any proof he wrote on my wall or sent a PM but somehow I got a rather nice message from the Canadian fellow johnnylarue167. :thank_you2:


    "Hi,

    I love your pure2 image. It is the best image that I have tested. Keep up the good work!

    I live in Toronto Canada, where enigma2 boxes are very rare. Much better than the buggy android boxes.

    Thanks again and much respect to you.
    "


    Well, thanx a bunch, on behalf of the coders, m8 - appreciated!:thumbup:


    I am just support cast, as it were... :cool1:

    It's in the file, just follow its path, its structure... You have the info in my guides. It tells you where it is if you DL the softcamkey file downloader, it's on the net, everywhere, c'mon...


    etc/tuxbox/...


    ... = depending which version of OSCam you are using... as in config or configccache etc.

    Maybe this shorthand will help people get the idea... As in, HOW TO PROTECT YOURSELVES!!!!


    Buy Surfshark VPN service, it's dirt cheap and easy to use in powerful Zgemma STBs H7 and 9 series, with PurE2 using OpenVPN protocol!


    24 months

    Coupon: sharkstart

    EUR 1.79/mo

    EUR 237.36EUR 42.96

    Billed every 24 months

    The 24 months plan includes the biggest savings and is fully refundable for 30 days.


    It works well on my

    -laptop with Winblows 7 64b,

    -Android Media Players, tablets and phones (Droid of various dates, even 64b) and

    -Enigma2 (PurE2 6.2 and 6.3)!


    Short tutorial for Surfshark OpenVPN in PurE2


    Remote control button MENU > Setup > System > Network > OpenVPN setup > OK button, confirm to download and install.


    71c545d3bfe1fe11d1.jpg


    Since you are here: in Network setup > Nameserver settings (see post no. 32 above)...


    Then, make a folder in your STB > use FileZilla Client, for instance, to connect and FTP into it > etc folder > right-click on it > Create new folder > name it: openvpn > right click and change file attributes to 755, like so...


    f3c62dc61ba8.jpg


    Now, copy these 2 files (previously made on your PC from ovpn file given to you by SurfShark) to openvpn folder you just made.


    I explained the details in a post (no. 17) above, how to make those 2 files...


    Restart PurE2.


    Start OpenVPN service like this...


    d3c2e273bcab13953f53.jpg


    I restart PurE2 here, just in case...


    Check your new address, according to the server you chose and the 10.8.8.x address which is the mark of the Surfshark VPN address (given to your STB by Surfshark VPN service).


    a165e8e.jpg


    Any questions?:rasta2bigsmoke0gf1:

    Delfi/tromo says:

    "Osmini4K added:


    - 4k VOD or streams checked - all fine (only for Osmio4k(plus) and OsMini4K on the Broadcom)
    - 3D all fine

    - All the playback so far fine

    - DVB-S (powervu, multistream, 4k, etc... all seems fine!)

    - Oscam in the feeds all fine (we do make special aarch64 - 64 bit version for Edision boxes, not some low level ARM common denominator - ψευδής version :)

    - Radio-fnc seems all ok

    - almost everything seems ok, more testing a bit later.... This took some time to make it work

    - CPU control (power/heat saving all fine)

    ------------

    Feeds updated with latest stuff like ciefp settings, and other plugins....


    Some changes in sf8008 mSD handling.Needs mSD re-init, sorry.

    ------------

    Ci+ fixes"