You look in plugin download
Posts by ferdi
-
-
Hi Ferdi.I have never used any configuration on CCCAM 2.3.0.What would it be?
you said "I usually use CCAM 2.3.0. It reads the card automatically"
what else do you need?
look http://linuxsat-support.com/sh…Ccam-cfg-file-for-newbies -
configuration is always the same
-
Quote
[global]
logfile = /dev/tty
nice = -1
preferlocalcards = 1[cache]
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
request_mode = 1
delayer = 70
ecminfo_type = 4
user = enigma
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox[webif]
httpport = 8888
httpuser =
httppwd =
httptpl = /etc/tuxbox/config/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1
Where these parameters come from?
I have not found documentation in wiki -
every thing at the right time!
1. buy the decoder
2. flash box
3. configure oscam ... -
assuming you are using OSCAM
Quoteraspberry pi 1
[cs378x]
port = 44441[reader]
label = sly ireland - sly sports pack
.....
group = 1[reader]
label = NC+ Canal
......
group = 2[account]
description = livingroom
user = user1
pwd = pwd1
group = 1,2Quoteraspberry pi 2
[cs378x]
port = 44442[reader]
label = sly uk - full package, racing uk
.....
group = 1[account]
description = livingroom
user = user1
pwd = pwd1
group = 1Quotelivingroom
[reader]
label = rspby1
protocol = cs378x
device = IP_raspberry_1,44441
user = user 1
password = pwd1
group = 1[reader]
label = rspby2
protocol = cs378x
device = IP_raspberry:2,44442
user = user 1
password = pwd1
group = 1 -
the best way to grow is to test on your skin
-
buddy, you need a guide http://www.streamboard.tv/wiki/OSCam/en
-
similar situation I have activated TIVUsat card installed in a solo2. it is in slot 1. Tivusat bouquet seems ok including Paramount but Mediaset doesnt clear or even show as transmitting on the frquency I have listed for it. I am using CCcam 2.3. Any advice would be appreciated.
are you Italian ?which Mediaset channels?
-
Ok - well right now i believe thats the way its set....i think. As i say i copied the extracted zip from page 1 and the local card started working on the 4k. At this point i believe it is ready to accept connections...at this point im clueless...i can see the webpage and log into if from my pc. Can i use the webpage to configure the oscam service on the 4k? then can i log into the webpage on the zero to "tell that to look at the 4k"....im really trying to keep it as simple as possible...
Just to add i dont want to use CCCam as the client as its currently not working on the latest VIX image...im trying to get away from using CCCam altogether....everyone keeps telling me that its old and not supported anymore...
well, I realized that you have your VU4k working with oscam, now addQuoteVU4K
Code
Display Moreoscam.conf [cs378x] port = xxxxx oscam.user [account] description = VUZERO user = vuzero pwd = v01 uniq = 1 group = 1,2,3, .....
QuoteVUZERO
-
Let me paraphrase the question :
Is it possible to clear sky bundesliga uhd channel on solo4k?
Anyone has experience with this...
VU4K configured with oscam works well with HD channels, so even with UHDI say more, if you have a VU4K as a client connected to a remote reader Sky De working, You can also watch UHD channels
-
it is necessary to proceed one step at a time
1. configure VU4K as server with oscam
2. configure VUZERO as client with cccam that connects to the reader VU4K1. step
you know how to do it ? -
sky sport bundesliga uhd
sky deutcheland
UHD is not related to the emulator but it depends on hardware, tuner, TV -
[MENTION=6833]ComfySofa[/MENTION], I will suggest you use VU4K as a server with oscam and other boxes that work as client with cccam
-
which channel ?
which provider ? -
OpenATV for me
-
Installed the OScam 11245 ipk for Open Pli and the basic 0963 configuration files as posted by Master G (thanks) and the local card began clearing straight away. I then translated the c and f lines from the cccam.cfg into corresponding readers (c lines) and users (f lines) and established the connections, for the readers it seems to me that the cccam version number is not necessary? Also nor is the card ID - would this limit what the server would share? The main problem now is that I can only decode the 0963 package, I assume this is because service files in the configuration files only listed 0963 services?
please update your configuration -
Now is much better
-
which country ?
-
simplify, eliminate unnecessary lines
Quote[reader]
protocol = newcamd
key = 0102030405060708091011121314
device = (external),10085
user = user --> right
password = password ---> right
group = 1
connectoninit = 1
lb_weight = 1000[reader]
Label = Port_10085
Protocol = newcamd
Key = 0102030405060708091011121314
Device = (external),10085
Account = (user),(password) ---> incorrect
Group = 1