You should update your card into original a*tro decoder before use the card.
Posts by dinsanek
-
-
Wow nice info, frankly I have no idea what you guys talking about coz i'm new in this program. LOL
It seem COOL
-
I did all what u mentioned above. effect main server failed to start up OSCAM and all buddy that used it screaming. :beated:
-
can't use mentioned config as a result from http://linuxsat-support.com/os…cam-servers-one-card.html
2012/08/15 11:38:32 9A6AF38 p testing_local_feed [newcamd] connection blocked, retrying in 27s
result from old config...
2012/08/15 11:41:44 9A69380 c FATH (09AC&000000/0000/59DD/87:B652): found (102 ms) by feed (F/1/0/0)
2012/08/15 11:41:51 9A67B40 c DIN0 (09AC&000000/0000/4F5E/87:8F21): found (100 ms) by feed (F/1/0/0)
2012/08/15 11:41:54 9A69380 c FATH (09AC&000000/0000/59DD/87:9435): found (100 ms) by feed (F/1/0/0)
2012/08/15 11:42:02 9A67B40 c DIN0 (09AC&000000/0000/4F5E/87:BCEC): found (1101 ms) by feed (F/1/0/0)
2012/08/15 11:42:05 9A69380 c FATH (09AC&000000/0000/59DD/87:D4B6): found (1099 ms) by feed (F/1/0/0)
2012/08/15 11:42:13 9A67B40 c DIN0 (09AC&000000/0000/4F5E/87:A0A9): found (1101 ms) by feed (F/1/0/0)
2012/08/15 11:42:15 9A69380 c FATH (09AC&000000/0000/59DD/87:3D61): found (1101 ms) by feed (F/1/0/0)
2012/08/15 11:42:23 9A67B40 c DIN0 (09AC&000000/0000/4F5E/87:ABA8): found (1100 ms) by feed (F/1/0/0)
2012/08/15 11:42:25 9A69380 c FATH (09AC&000000/0000/59DD/87:549B): found (1101 ms) by feed (F/1/0/0) -
2012/08/15 11:38:32 9A6AF38 p testing_local_feed [newcamd] connection blocked, retrying in 27s
-
Display More
Why not ?
It is your local card, i don't see any immorality in using it in 2 servers, as long as the servers are yours. Many people have more than one server.For the settings,
in oscamy, the one that reads the card :
oscam.user
[account]
user = server2
pwd = pass
group = 1
keepalive= 1in oscamx, the second server :
oscam.server
[reader]
label = my_local
protocol = newcamd
device = 127.0.0.1,11000 or 192.168.0.101,11000 ( the i.p. and newcamd port of the first server )
key = 0102030405060708091011121314
user = server2
password = pass
group = 1 ( or 2 if you allready have a reader with group = 1 )I wish this would fix my problem too. My problem now is main server used smargo. is it apply same config as above?
-
Ops sorry, :)
Okay done.
-
Hi expert,
I really hope your help to fix my problem with internal network sharing proxy. Below are the results after 1 hour process.
2012/08/13 23:38:36 83DF628 c DIN0 (09AC&000000/0000/4EF4/87:58DC): found (1002 ms) by feed (F/1/0/0)
2012/08/13 23:38:46 83DF628 c DIN0 (09AC&000000/0000/4EF4/87:CB00): found (1000 ms) by feed (F/1/0/0)
2012/08/13 23:38:56 83DF628 c DIN0 (09AC&000000/0000/4EF4/87:A07D): found (1002 ms) by feed (F/1/0/0)
2012/08/13 23:39:06 83DF628 c DIN0 (09AC&000000/0000/4EF4/87:7F55): found (1002 ms) by feed (F/1/0/0)
2012/08/13 23:39:16 83DF628 c DIN0 (09AC&000000/0000/4EF4/87:F5D8): found (1002 ms) by feed (F/1/0/0)
2012/08/13 23:39:26 83DF628 c DIN0 (09AC&000000/0000/4EF4/87:C4C2): found (1001 ms) by feed (F/1/0/0)For 1st 30 minutes sharing proxy is seem Okay without any spike/lag on my TV screen but later on its getting worst and I checked the (ms) getting higher and sometime it can be 2000++ ms. Not only me connected to my server but I've made this server shared with friends.
Feed from next server on same LAN "oscam.server"
[reader]
label = feed
description = feed from JuboqHang
protocol = cccam
device = 192.168.0.100,12000
user = temp
password = temp12345
fallback = 1
caid = 09AC
ident = 09AC:000000
group = 1,2,3,4
emmcache = 1,3,2
cccversion = 2.1.4
cccreconnect = 0From main server "oscam.user"
[account]
user = temp
pwd = temp12345
description = feed for poor man
group = 1,2,3,4
monlevel = 4
caid = 09AC
ident = 09AC:000000
cccstealth = 1
keepalive = 1
numusers = 1
penalty = 3Okay, on the main server there is no (ms) over then 300 ms at all with current users connected except if my server lagging/spike I can see my id "temp" only is increased.
Sorry for my bad English.
Thanks in advance,
Any help guys?
