is it Spansion S25FL016K ?
Posts by SkullFace
-
-
What is the model of the spi flash chip for u-boot on Truman Top Box 2 [Spark7162]
I have tried similar chips the receiver works but i cant switch to enigma 2! only spark works
-
I would like to suggest this one line command
Codeopkg update && opkg install python-requests python-cfscrape oe-alliance-branding nodejs wget curl libcrypto libssl -
If you can insmod i2s.ko under enigma2
Coderoot@amikoalien:~# insmod /lib/modules/2.6.32.71_stm24_0217/extra/i2c_spi/i2s.koand use printenv setenv saveenv commands it should be easier than the serial console.
backup the output of printenv first.
-
I was posting more details and commands yesterday but my internet disconnected and i lost all what i typed, i will update the OP soon with all details.
For now, if you are sure that your stb has WINBOND CHIP and NAND CHIP it should work, but i am not responsible for bricked device.
Note that Amiko Alien 2 wont work!
There is a safe method you can try if you can access uboot serial console
use setenv to changes the env variables!
Code
Display Moresetenv bootcmd_spark 'nboot.i 0x8C000000 0 0x00100000 ;bootm 0x8C000000' setenv bootcmd_enigma2 'nboot.i 0x8C000000 0 0x18000000 ;bootm 0x8C000000' setenv erase_env 'mw.b $load_addr 0 0x20000;eeprom write $load_addr 0x000a0000 0x20000' setenv loadu_uboot 'fatload usb 0 $load_addr u-boot.bin' setenv loadu_kernel 'fatload usb 0 $load_addr $kernel_name' setenv loadu_kernel_spark 'fatload usb 0 $load_addr uImage' setenv loadu_kernel_enigma2 'fatload usb 0 $load_addr uImage' setenv loadu_userfs 'fatload usb 0 $load_addr $userfs_name' setenv loadu_userfs_spark 'fatload usb 0 $load_addr e2jffs2.img' setenv loadu_userfs_enigma2 'fatload usb 0 $load_addr e2jffs2.img' setenv tftp_uboot 'tftp $load_addr u-boot.bin' setenv tftp_kernel 'tftp $load_addr $tftp_kernel_name' setenv tftp_kernel_spark 'tftp $load_addr uImage' setenv tftp_kernel_enigma2 'tftp $load_addr uImage' setenv tftp_userfs 'tftp $load_addr $tftp_userfs_name' setenv tftp_userfs_spark 'tftp $load_addr e2jffs2.img' setenv tftp_userfs_enigma2 'tftp $load_addr e2jffs2.img' setenv erase_kernel 'nand erase 0x00100000 0x00a00000' setenv erase_userfs 'nand erase 0x01400000 0x16c00000' setenv erase_kernel_enigma2 'nand erase 0x18000000 0x00800000' setenv erase_userfs_enigma2 'nand erase 0x18800000 0x07700000' setenv write_kernel 'nand write.i 0x8C000000 0x00100000 $filesize' setenv write_userfs 'nand write.jffs2 0x8C000000 0x01400000 $filesize' setenv write_kernel_enigma2 'nand write.i 0x8C000000 0x18000000 $filesize' setenv write_userfs_enigma2 'nand write.jffs2 0x8C000000 0x18800000 $filesize' setenv update 'eeprom write $load_addr $monitor_base $monitor_len' setenv update_kernel 'nand erase 0x00100000 0x00a00000 ;nand write.i 0x8C000000 0x00100000 $filesize' setenv update_userfs 'nand erase 0x01400000 0x16c00000 ;nand write.jffs2 0x8C000000 0x01400000 $filesize' setenv update_kernel_enigma2 'nand erase 0x18000000 0x00800000 ;nand write.i 0x8C000000 0x18000000 $filesize' setenv update_userfs_enigma2 'nand erase 0x18800000 0x07700000 ;nand write.jffs2 0x8C000000 0x18800000 $filesize' setenv tftp_kernel_name_spark uImage setenv tftp_kernel_name_enigma2 uImage setenv tftp_userfs_name_spark e2jffs2.img setenv tftp_userfs_name_enigma2 e2jffs2.img setenv kernel_name_spark 'enigma2/uImage' setenv kernel_name_enigma2 'enigma2/uImage' setenv userfs_name_spark 'enigma2/e2jffs2.img' setenv userfs_name_enigma2 'enigma2/e2jffs2.img' setenv uboot_name 'u-boot.bin' setenv bootfromnfs 'console=ttyAS0,115200 rw root=/dev/nfs nfsroot=192.168.40.19:/opt/target,nfsvers=2,rsize=4096,wsize=8192,tcp nwhwconf=device:eth0,hwaddr:00:80:E1:12:40:61 ip=192.168.40.61:192.168.40.19:192.168.3.1:255.255.0.0:LINUX7167:eth0:off stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=7000' setenv bootargs_flash 'console=ttyAS1,115200 rw ramdisk_size=6144 root=/dev/ram0 init=/linuxrc nwhwconf=device:eth0,hwaddr:00:80:E1:12:40:69 ip=192.168.0.69:192.168.3.119:192.168.3.1:255.255.0.0:Spark:eth0:off stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=7000' setenv bootargs_spark 'console=ttyAS1,115200 rw root=/dev/mtdblock4 rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 nwhwconf=device:eth0,hwaddr:00:80:E1:12:40:61 ip=172.100.100.249:172.100.100.174:172.100.100.174:255.255.0.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 bigphysarea=6000' setenv bootargs_enigma2 'console=ttyAS1,115200 rw root=/dev/mtdblock6 rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 nwhwconf=device:eth0,hwaddr:00:80:E1:12:40:61 ip=172.100.100.249:172.100.100.174:172.100.100.174:255.255.0.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 bigphysarea=6000' setenv bootargs 'console=ttyAS1,115200 rw root=/dev/mtdblock6 rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 nwhwconf=device:eth0,hwaddr:00:80:E1:12:40:61 ip=172.100.100.249:172.100.100.174:172.100.100.174:255.255.0.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 bigphysarea=6000' saveenvGood Luck
-
Hi,
Can you explain the method to flash it?
Can you tell it will work on Amiko Alien 2 also or not?
I flashed amiko alien 2 original uboot on my device before and it soft bricked my stb, I spent hours on the serial console to flash my original uboot dump to fix my device.
This wont work on amiko alien 2!
-
Warning this can brick your STB if you have different flash chips than my model !!!
-
I want to mod my stb to use both of the 128MB ram chips in enigma2!!
If a hardware mod can do it, its okay.
Anyone have ideas?
-
I am using OPEN-VISION now with a custom channel list, its now usable with flash-expander and swap.
I have the same python crashes that happen in both of ednaz and lprot builds.
And i have a bug in the VFD frond lcd display, its flickering crazy between clock, channekl number and channel name !!!!
any solution?!
oh and btw the temporary solution for boxbranding error is to get boxbranding.so files from openatv or pure2 and place them in /usr/lib/enigma2/python which is the same location of the files mentioned in the OpenATV and PurE2 images.
-
Display MoreDisplay More
My friend / SkullFace
Firstly The manual says the box has 2x 128MB DDR RAM, however the linux reads only 128MB total!!!!
Each one is a separate dedicated system
One is DDR RAM 128MB to the Spark system
One is DDR RAM 128MB to linux system
Each one is 128MB
Try this version It's new and modern
openpli-enigma2-homebuild-spark-20190504_usb.zip by Vasiliks
Good luck
respected Ahmed Gayze
is this for 7162 chipset model?
Can i do it in my Srt 2020 hd plus 7162 chipset box?
No. i tested it and it doesnt work!
Probably its for Spark STI7111 chip.
ahmed gazye, Is there another copy for STI7162 ?
-
you tried this one
spark7162_Audioniek_enigma2_gst-epl3_flash_P217_CDK-rev1165Yes but it was worse than Ednaz!
-
If the ram is split which is not likely, how can i use all the ram on E2?
Thanks again
-
sadly i couldnt find a stable & new HDMU image, I tried PurE2 its very stable and compatible but very slow even with other skins.
Compare Openpli-7 RC ednaz vs Openpli-7 RC ednaz backup hosted here on linux sat vs Openpli Lprot.
Which one is the best?
Thanks
-
Hello
I have Spark7162 device Truman TOP BOX 2 Tuners.
I cant find a modern proper E2 Image for my box.
I have tested these images:
OpenVision = Buggy&Slow.
OpenAtv = stable&veryslow.
PurE2 = stable&veryslow.
Pkt = outdated.
Openpli-7_rc_ednaz = veryfast&verybuggy&unstable.
please point me in the right direction, I need the latest stable and fast E2 for my STB.
Note:The manual says the box has 2x 128MB DDR RAM, however the linux reads only 128MB total!!!!
that is same with spark or any E2 image....
Is there a bug or hardware issue or simply the manufacturer lied about the specs?!!
Thanks
-
there is another thing too, the ram is only 128Mb however the box have 2x 128MB ram!!!
I need to use all the ram for performance.
Note: Amiko Alien 2 uboot file bricks my device and should brick all devices with SPI Winbond 2MB flash
-
I bricked the device 2 times and fixed two times.
please if anyone have a solution please help.
btw turned i have 2MB WINBOND SPI Flash not 8MB NOR as stated in the printed manual!!!
-
Hi
I want to resize the mtd4 spark partition because its taking too much space for nothing! while the Enigma2 partition is ~120MB.
Every time i eventually run out of space on Enigma2 and experience crashes and boot loop, external storage [Flash expansion] is not reliable as it has its own bugs and issues.
Please assist me to change the sizes evenly for more practical use of the 512MB NAND.
Thanks in advance.
Code
Display More[root@stlinux]#cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "uboot" mtd1: 00a00000 00020000 "Spark kernel" mtd2: 00700000 00020000 "Reserve0" mtd3: 00200000 00020000 "Reserve1" mtd4: 16c00000 00020000 "Spark Userfs" mtd5: 00800000 00020000 "E2 kernel" mtd6: 07700000 00020000 "E2 Userfs" [root@stlinux]#cat /proc/partitions major minor #blocks name 31 0 1024 mtdblock0 31 1 10240 mtdblock1 31 2 7168 mtdblock2 31 3 2048 mtdblock3 31 4 372736 mtdblock4 31 5 8192 mtdblock5 31 6 121856 mtdblock6 tools ==> [root@stlinux]# [ dnsd gzip logname netstat sh udhcpc [[ dnsdomainname halt ls nice sleep umount adjtimex dos2unix head lsmod nmbd smbd uname ash du hostname makemime nslookup ssh-keygen uniq awk echo ifconfig md5sum passwd sshd unix2dos basename egrep ifdown mesg patch start-stop-daemon unzip bunzip2 env ifup mkdir pidof stat uptime busybox expr inadyn mkdosfs ping stty usleep bzcat false inetd mke2fs popmaildir sync vi bzip2 fdisk init mkfifo poweroff tail watchdog cat fgrep insmod mkfs.ext2 printenv tar wc chat find ip mkfs.ext3 printf tee wget chmod flash_erase iwconfig mkfs.vfat ps telnet which chown flash_eraseall iwlist mknod pwd telnetd whoami chpasswd flashcp iwpriv mkswap reboot test wpa_cli clear free kill mktemp reformime tftp wpa_passphrase cmp fsck killall modprobe reset tftpd wpa_supplicant cp fsck.ext2 killall5 more rm time xargs cut ftpget less mount rmdir top yes date ftpput lighttpd mv rmmod touch zcat dd getty lighttpd-angel nanddump route tr df grep ln nandtest sed true dmesg gunzip login nandwrite sendmail tty
