Posts by Monlo

I tried running it from my Android tablet via telnet,it was not successful.See results attached....

How do make it succeeds....Screenshot_20230410_195455.jpg

Quote from taras-ua

I would like to introduce the Key updater script for AFN package channels.

When you don’t want to wait for auto-update of keys, start watching right now.

The script parses the keys from the forum and patches the SoftCam.Key file in your receiver via FTP. Written in Python3, only built-in modules, no additional packages need to be installed. Tested on Linux and Windows. SoftCam.Key file from the forum, but any other AFN containing EMM keys can be used. Tested on Enigma2, but should work on other Linux receivers as well. Does not affect auto-update, etc.

Run from your computer with the command:

> python3 key_patcher.py --ip RECEIVER_IP

If the user or password is not root, add arguments to the startup line.

!!! After successful completion, restart Oscam on your receiver. !!!

An example of output:

Code

$ python3 key_patcher.py --ip 192.168.0.120
2023-04-02 18:18:32,335 INFO     PowerVU KeyPatcher by taras-ua, ver 0.9
2023-04-02 18:18:32,339 INFO     Connecting https://www.linuxsat-support.com/thread/152939-only-afn-powervu-keys-no-chat-keys-only/?pageNo=9999
2023-04-02 18:18:33,319 INFO     Found last page: 19.
2023-04-02 18:18:33,319 INFO     Connecting https://www.linuxsat-support.com/thread/152939-only-afn-powervu-keys-no-chat-keys-only/?pageNo=18
2023-04-02 18:18:34,282 INFO     Got key pair ('00A9B5C3A295635C', '01A58923BD775AD9').
2023-04-02 18:18:34,392 INFO     Found OsCam version: oscam-1.20_svn-r11718-798
2023-04-02 18:18:34,517 INFO     /home/gx/local/oscam/SoftCam.Key has been patched with ('00A9B5C3A295635C', '01A58923BD775AD9').
2023-04-02 18:18:34,634 INFO     Done!

Display More

Where are we suppose to put the unzipped file "key_patcher.py" on the decoder?

Are we suppose create a folder or what?Please be explicit and do give?directions....

Thanks a lot...

Quote from Panda555

Install the Ncam emu again and add in oscam.server

Quote

[reader]

label = Emulator_AFN2

protocol = emu

device = https://raw.githubusercontent.…stCamRza/main/SoftCam.Key

caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1

detect = cd

ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2602:000000;2610:000000;4AE1:000011,000014,0000FE

group = 1

emmcache = 2,1,2,1

emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE

[reader]

label = linuxsat-support.com

enable = 1

protocol = emu

device = emulator

#device = http...

disablecrccws_only_for = 0E00:000000

caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1

detect = cd

ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE

group = 1

emmcache = 2,1,2,1

emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE

Display More

Display More

I have installed the NCAM 13.5 now again.What do you mean by " and add in oscam.server" ?

Could you please explain in details?

Thanks...

Quote from Panda555

Quote from Talks

Hi guys,

I tried this KeyAdder posted all is correct and working on the update services found BUT seen that none of them have the new update keys with AFN on 9e so I still have to manually put is the new keys in the softcam , keys files.

I did try each provider of the softcam and AFN did not work, why say they are Updated regular when they are not.

Regards Talks.

Display More

I just install Ncam emu 13.5. No problem with autoupdate AFN ( you must wait about 3 - 5 min. ). Only need to properly configure.

Display More

I have installed this and even have to wait after 1hour,yet AFN not opening.I even tried OSCAm-EMU still same thing.How do I make this work?

Quote from jenseneverest

Quote from mj_84

Quote from Monlo

Anyone watching AFN now? Ncam and OSCAM emu are not opening them again as I type.

Any solution?

I confirm. Does not work

see this KEY ONLY thread here

Thread

ONLY AFN POWERVU KEYS - NO CHAT - KEYS ONLY !!

linuxsat-support.com/cms/attachment/215540/



NEXT->01 7D 26 81 EC A2 1F B7

iyikosan

Jul 7th 2022

Keys only last about 2 hours, so if keys are not posted if will not work..... those that post keys do so as a gesture of good will, and at times are busy with there normal lives.

Display More

I believe the keys posted on this forum are supposed to be read by the Ncam and OSCAM server to open the channels? How come,even when the keys are posted here,yet the channels refuse to open still?

Also,is there a way to manually enter the keys posted here into the Enigma2 linux box so? as to open the AFN channels manually? I need solutions please... x

Anyone watching AFN now? Ncam and OSCAM emu are not opening them again as I type.

Any solution?

Anyone watching AFN now? Ncam and OSCAM emu are not opening them again as I type.

Any solution?

My AFN packages not opening again with NCam and Oscar emu as I type now. Can anyone prefer solution for me. They use to open before now until few days ago....

Kudos to them all as they have life to live outside this,even though I have not been enjoying the auto roll functions of Oscar and Ncam lately on AFN packages....

Quote from fairbird

Update ...

Ncam V13.0

-updated cmake curl

-Show curl in ncam.version

-Some improvement for Android devices

-If CCcam.cfg is disabled, it cannot be edited on the web interface

Display More

where can I download it?

Quote from lme

Quote from Monlo

This is not opening AFN packages again since morning. What is happening?

from time to time, you need to delete ncam.cache file.

Thanks.But how/where do I locate this?

This is not opening AFN packages again since morning. What is happening?

Quote from DRIVN_NeGA iX

i disable multiple online readers that seem work for me, since i only have this site only and rest just update slowly and built in internet softcam.key seem not cause any issue when it doesn't update at all, its issue when labels are use vs devices don't download keys often when running once...label method are great but not great when you have 3 or 4 running same time of downloading keys every minute , and softcam is not smart when it override good key with bad one or crash or vice versus what its doing that is my problem with my rom pure65, i either choose only one label internet key or manually update softcam.key? its really a doozy no matter what i do, its PVU issue

Thanks all the same

Quote from DRIVN_NeGA iX

well, i guess we both have same problem when running more than one server in same time on those channels...i get it solved by just have only linuxsat-support only , and i know its not the best solution when others want more online readers for those channels but remember this cam still base on oscam software its not automatic to detect which reader have outdated keys and use only working one when its tested during the process...cause i think i know what really wrong , its causing collision when more than one reader running the same time with different keys processing is causing the crash...its same concept as what others used to do with other methods that i learn that you can't have many ports open same time for same channels, since this case others have different issues for other engima2 roms...i haven't tested with successful ones when pure65 is my preferred rom due to plugins it has is not available in other roms...should be universal for everyone using same pure2 FNC plugins but its proprietary only for pure2 users

I don't understand this line:

"..i get it solved by just have only linuxsat-support only , and i know its not the best solution when others want more"

Could you please be more simple as to direct me on how you resolved yours?

Currently having this problem on open ATV 6.4........

I need solutions

Quote from VangelisGi

Webif - >configuration - > stream relay, disable.

As you can see from my attachment,it is already disabled yet problem persists. I need solutions please....

Quote from mj_84

Ncam 12.9- image open atv 6.4- problem: freezes the picture of the decoded channel. Need to restart ncam several times.

Quote from mj_84

Ncam 12.9- image open atv 6.4- problem: freezes the picture of the decoded channel. Need to restart ncam several times.

Same here,until I restart the NCAM severally before it becomes stable.A permanent solution is welcome....