Many thanks!
Now Ok (Mipsel for DM7080)
(ARM -for 920..)
Works like a dream....
Now I 'll seek to share with Bullsat....
Regards!
Many thanks!
Now Ok (Mipsel for DM7080)
(ARM -for 920..)
Works like a dream....
Now I 'll seek to share with Bullsat....
Regards!
Many thanks for the fast reply!
Which version of it? (Libusb?)
You are quite right!
Here is a short log. (disabeled 0624 reader ,in order not to have conflict.) Using Oscam 11523 'Lb2. Card is read Ok and AU , but no picture. ....(While with 0624 no problem at all..) -Any Help??
Thanks!
Oscam reads the card & update but no picture... is there problem with Dvbapi ( May be because I also have 0624 - now bothe dark....)
Cannot clear 0653. Where can I find the "extra layer" .....
Hi,
Last week added Antiksat film package , but only HBO csnnot clear( using Dreambox/Newenigma- Oscam).
Any help with correct Cfg??
@s3n)-Many thanks for your reply & professional explanation.
I s there a way to modify newer versions of oscam so it will act like 11523 version (l2B..)?
Oscam 11704 from tomek6680- not working at all....
It is Ok but with older Oscam version 11523
Version: oscam-1.20_svn-r11523
Compiler: mipsel-unknown-linux-gnu
Box type: dm8000 (generic)
But now the problem this version does not support smart reader...
(ecm) dvbapi (0624@000000/A000/3AA7/4F:xxxxxxxxxxxx): found (97 ms) by SkyLink_Ice_Irdeto - HirTV
Display MoreSorry, I don't know the Hungarian channels from Skylink provider. I have no experience with them.
But it is possible that they also work on the new Irdeto Layer 2B mode, as mentioned above.
However, you need to use a modified (non-public) Oscam, unfortunately. The risk of using it is up to you. Maybe it will be OK, maybe not. I have no idea, I'm sorry.
I assume you have paid the Hungarian package (this is paid as an additional Skylink package).
Hungarian package paid extra & added.
Version: oscam-1.20_svn-r11523--is with l2b mode...
The LOG from Oscam-Webif would really help. I have no idea what exactly is not working for you or what the problem is with you. You must describe the problem in detail.
Thanks for your reply.
The problem is as described- Can clear Skylink 0624 with Oscam cfg but not the Hungarian package.(Which also clears fine if I insert the card in original Skylink cam..)
I will upload later on the log file related...
Display MoreMaybe Other Caid i asume you have 0624
Did you have more Entitlements on Card ??? and Prio List in Oscam.dvapi Ignores any Other ???
Codedid you2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 stopped descrambling for program 3A9C (M4 HD) 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0624 ECM_PID: 0623 PROVID: 000000 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 0625 PROVID: 051910 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0653 ECM_PID: 062A PROVID: 000000 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0B02 ECM_PID: 062B PROVID: 000000 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 4 CAID: 181D ECM_PID: 062D PROVID: 000000
My card has 0D96 & 0624. I am using now 0624....but cannot clear the only the Hungarian package.......
Hungarian package is not working with ICE cards, You need to use M7 card (pure Irdeto) and patched oscam for this card.
Thanks !
Where can I download the patched Oscam?
Sombody wrote I need Oscam with l2b support.... Where to find?
Maybe Other Caid i asume you have 0624
Did you have more Entitlements on Card ??? and Prio List in Oscam.dvapi Ignores any Other ???
Codedid you2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 stopped descrambling for program 3A9C (M4 HD) 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0624 ECM_PID: 0623 PROVID: 000000 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 0625 PROVID: 051910 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0653 ECM_PID: 062A PROVID: 000000 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0B02 ECM_PID: 062B PROVID: 000000 2022/02/02 15:49:27 611B0E3C c (dvbapi) Demuxer 0 ecmpid 4 CAID: 181D ECM_PID: 062D PROVID: 000000
My card has 0D96 & 0624. I am using now 0624....but cannot clear the only the Hungarian package.......
Using Dreambox 8000 - New enigma2 image, Oscam 11704, able to clear all my irdeto channels with correct cfg Caid 0624 (Ice card) but not the Hungarian package...(although if i put the card in original Skylink card it clears) I do not know what is wrong.... Help...
Thx !
What version of oscam is recommended to clear with SoftCam keys?
Hi,
In Oscam, (11678) -the cfg -
[reader]
label = SoftCam
description = SoftCam
enable = 0
protocol = cccam
device = /etc/tuxbox/config/SoftCam.Key
inactivitytimeout = 30
fallback = 1
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000
group = 1
emmcache = 1,1,2,1
cccversion = 2.3.2
Always "Reader error"
What's wrong?
Installed (threw blue panel of PureE2 on my DM7080) CCcam 2.3.8, after long time not using.
Pointed the Cfg file to the usr/keys and installed latest SoftCam .
Have no Joy trying to clear Bulsat, for example...
Telnet informs cannot decode-No key...
What's wrong....????:unhappy1:
Any help??
hi nagra I have card tnt v5 expired still working with ncam 1.5 with auto update entitlement for my canal digital spain Movistar for some raison my tnt v5 update is weel ??? never go down
Can you post your Cfg?
u will need original box , u can try ncam I use ncam leave the card on france 2 for more then 15 minutes and play to change channels ?????/
if u are in uk u can send me u card and try to reactivated on original box ????
Thx , but not in UK. Will try with Ncam but need cfg . ( May be my AES key is wrong?)
I know that the card is expired, but, still, there has to be ecm/emm flow of OK/Not OK .....
Received an expired TNTsat Ver5 card.
Using DM7080 with Pure 2.6 image & latest Oscam version with the following Cfg , no ecm/emm flow at all (No Ok/or skipped...) --... (What is wrong? Any help?):
[reader]
label = tntsat
protocol = internal
device = /dev/sci0
services = tntsat
caid = 0500
boxkey = 014xxx2F
deskey = 22xxxxxxxxxxx2E3
ecmwhitelist = 0500@030B00:EC,57,D8,10D,12A,142,C4,148,156,166
detect = cd
mhz = 450
cardmhz = 2700
ident = 0500:030B00,FFF400
chid = 0500:001314,001319,00150D,000000
aeskeys = 0500@030B00:439xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx2AE
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
lb_weight = 1000
dropbadcws = 1
disablecrccws = 1
auprovid = 030B00
Thanks, pal, but as stated in my last response- already gave the receiver to a friend......