found the solution
Posts by Majd_666
-
-
Hey guys,
can anyone please help me understanding this,
i am trying to run a command and i am having the below error
File "/tmp/Dremma_IKS", line 91, in <module>
User = str(sys.argv[1])
IndexError: list index out of range
i am not sure if this is related to the image itself , but i have tried it on multiple fresh images and i got the same thing
the command is
Codewget -O /tmp/Dremma_IKS “http://dremma.site/enigma2/Dremma.py” && chmod 777 /tmp/Dremma_IKS && /tmp/Dremma_IKS
many thanks
cheers
-
yesterday they updated their server,
there's also a telegram channel but i think i am not allowed to post the link here -
guys,
i confirm it works perfectly on octagon SF8008 UHD now
thank you so much for your help and support
cheers
-
So you should ask The Dead duck team a question.This is their work.
apparently the Hislicom arm baes is not supported :/
-
It is not necessary to use DreamboxEdit. This can be done without DreamboxEdit:
1. copy the "userbouquet.sky.tv" file to the "/etc/enigma2" directory
2. add the new one userbouqet record into the user favorite list - i.e. into the file "/etc/enigma2/bouquets.tv"
- so add the new line there (using FTP connection for example):
#SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.sky.tv" ORDER BY bouquet
3. reload the settings (userbouquets and lamedb) via the Shell, with the help of openwebif:
wget -qO- "http://127.0.0.1/web/servicelistreload?mode=0"; sleep 2; wget -qO- "http://127.0.0.1/web/servicelistreload?mode=4"
Unfortunately, the instructions are not completely accurate or are intended only for a specific Enigma2 distribution and not for all Enigma2:
xxxxxxxxxxxxxxxxxxxxxx
thanks man , i was able to load the bouquet , please see the picture attached and it does not make sense to me as i can see the CAID but with no signal and it shows IPTV !
-
Hello,i have just uploaded for your imagination three channels.Cielo hd works via cardshare(Tivusat platform),CNBC is free and the last channel is Sky sport football hd.I have no subscription only downloaded and installed dremma files.
thanks man , really appreciate it , however i am still not able to import the channel list ,
-
the only way i could import it
was to use dreamboxedit
but then again i'm doing it to help you
i'm not going to subscribe to something i don't want
or think it's right
free for me
thanks man , i wann't successful though and it seems the service is down at the moment , a new firmware is coming up this week,
i will wait and update here
thank you again ,
cheers \m/
-
noticed
[streamrelay]
stream_relay_ctab = 09CD
then stream relay
channel list
and i cant get to work on Zgemma H9 either
sorry i am not familiar with the term, i am new to this and i am trying to larn my way through E2,
i can't even see the userbouquet.sky.tv after i moved to etc/enigma2 , it appears empty
-
if i had to guess the password would be in one of the oscam files you've been given, if not just try typing some password of your own.
i've tried both the password my own and the password given for the service also i tried just to press enter , and nothing :/
-
sorry, you mean the password of the subscription?
This is the first time anything like this has surfaced on the forum so we are only guessing because you havn`t offered us the instructions you`ve been given.
Telnet is looking for a password, so we can only assume you`ve been given one. If not it will be related to the details your supposed to enter into oscam.server file.
it is weird because when i run the below comand the password pops up but the comad runs till the end i =f i am not mistaken
please see below
starting stub ...
Password:
##DREMMA## - 1.0.0 - CodedBy pintus@secmail.pro
-
Quote from Majd_666
create folder in etc
mkdir /etc/dremma there's no oscan server in the tuxbox floder
The oscam configs aren't supposed to be in /etc/tuxbox.
Read the instructions again. Create a directory named dremma in /etc then put the oscam configs there.
Quote from Majd_666insert userbouquet.sky.tv into i have already bouquets installed for the sats i receive
Regardless of whether you already had bouquets installed follow the instructions completely.
yes i followed them exactly, but i think the issue is after i run the /usr/bin/dremma_arm_1.0.0 and the password prompt ,
i click enter then this pops up
starting stub ...
Password:
Integrity error. Good password ?
-
Are you sure this is for satellite ? I heard DTT was working a while back, but this is the first report of it working on Sat that i have seen.
yes man, it is working on SAT
-
yes exactly , i wanted to make it clear that there's nothing in tuxbox
-
sorry, you mean the password of the subscription?
This is the first time anything like this has surfaced on the forum so we are only guessing because you havn`t offered us the instructions you`ve been given.
Telnet is looking for a password, so we can only assume you`ve been given one. If not it will be related to the details your supposed to enter into oscam.server file.
these are the instructions i have given along with the user and pass when i bought the subscription
Dremma arm 1.0.0 arm (zgemma h7, zgemma h9, dreambox 900 .....)
Insert the binary dremma_arm_1.0.0 into /usr/bin
then
chmod +x /usr/bin/dremma_arm_1.0.0
create folder in etc
mkdir /etc/dremma there's no oscan server in the tuxbox floder
insert into it:
oscam.conf
oscam.server
oscam.user
edit oscam.server with username,password, server and port you bought online
Insert userbouquet.sky.tv into i have already bouquets installed for the sats i receive
/etc/enigma2/
restart enigma
Yu will find a new bouquet at the bottom of your bouquet list
to run dremma you need to use from shell this command
echo 0070:0E:075DC71B5BB379FD | dremma_arm_1.0.0 -b -c /etc/dremma/
-
my understanding of the plugin
Insert the binary dremma_arm_1.0.0 into /usr/bin
then
chmod +x /usr/bin/dremma_arm_1.0.0
create folder in etc
mkdir /etc/dremma
insert into it:
oscam.conf
oscam.server
oscam.user
edit oscam.server with username,password, server and port you bought online
Insert userbouquet.sky.tv into
/etc/enigma2/
restart enigma
Yu will find a new bouquet at the bottom of your bouquet list
to run dremma you need to use from shell this command
echo 0070:0E:075DC71B5BB379FD | dremma_arm_1.0.0 -b -c /etc/dremma/
as found on another siteand for your info
there is no dremma webif port setup in oscam.config
if you entered everything correct
only
that bouquet should be open
i did those steps and i can see the webinterface via IP:8888
i don't understand what i am doing wrong
my device is octagon SF 8008 UHD -
You must have been provided a password, so enter the password when prompted.
Your also supposed to run another command to start everything which you havn`t shown us.
To run Dremma you need to use from shell this command: echo 0070:0E:075DC71B5BB379FD | dremma_arm_1.0.0 -b -c /etc/dremma/
sorry, you mean the password of the subscription?
i am not sure if i should run the command echo 0070:0E:075DC71B5BB379FD | dremma_arm_1.0.0 -b -c /etc/dremma/ before knowing if the plugin is installed properlyi run it anyways , please see the picture
-
is there any way to check if the plugin is working in telnet ?
Its not a plugin, but more like a modified version of oscam you`ve installed.
If you`ve followed the instructions properly it will have created a bouquet for those channels (press the TV button for bouquets)
You`ve been provided oscam config files, so you must be able to look at the oscam webinterface to check if its working. webinterface details will be in oscam.conf [webif}]
i followed the instruction properly , afteri past the code i click enter and the afirst screen will show up
after enter the second screen shows up with integrity erro, good password?after that i pres enter again and nothing happen
in the webenterface the status is unknow please see attached
-
i have this box too and i m only curious about working this plugin with Octagon sf 8008 4k.Maybe this plugin works with BCM processor not hisilicom.I do not know.Ask your seller about it.
Bye
is there any way to check if the plugin is working in telnet ?
thank you
-
what box ?
maybe not for your box
i've read only for
Dremma arm 1.0.0 arm (zgemma h7, zgemma h9, dreambox 900 .....)
maybe i read it wrong
should be working as Octagon SF8008 an ARM based