Posts by suppenkasper0815

suppenkasper0815 · Jan 27th 2025

May someone send me an fitting .ipk oscam-emu from 11866 or some up-to-date version? - Unfortunately I can't download anything more today. - I need it for a Gigablie Trio 4K UHD (Arm-Box). - Thank you in advance

suppenkasper0815 · Aug 15th 2023

Hey guys,

I don't know what to do next. I have micro freezers on Hdplus Channels like Pro7HD.

The ECM's are flagged as and local generated with HD01 card.

Unfortunately there are micro freezer with ECM's around 360ms - 450ms.

Can anyone confirm this?

Server uses 11.724 and SF8008 Client Box 11.719.

I haven't seen any issues in between these versions, so there should be no need to update as far as I think.

Any other idea will be appreciated.

Thanks

suppenkasper0815 · Jan 24th 2023

Hey guys,

I am running a few GigaBlue and Octagon Receivers on my homenet with succesfull oscam-icam configuration with OpenATV6.4 and OpenATV7.1. So I guess i know the basics... but it gives me headaches since weeks for my DreamBox UH900 to work.

I tried OpenATV7.1 on the box with the same configuration then with the other devices, no luck. Streamrelay is not sending and request to the server. It seems just dead. The same if I try to confgure ragegast.

So I went back to DreamEliteOS with OE 2.5 image as far as I can see... I am not absolutely sure how i can identify with type of image I use on my DMM900 UHD.

I installed the latest 11718-r798 with Icam v9 and also 11715 with Icam v5 patch. both don't work with DreamOS. - So I hope you can help me. It is also very annoying that HD+ isn't working without interrupts every minute. With openATV and on my other devices everything works fine, but not with the DMM900 UHD bitch...

I would much appreciate if you can help and would also provide logs or requests of you guys.

suppenkasper0815 · Jan 17th 2023

Could this also run on Orange PI PC2 or Banana PI M1 with Armbian and ubuntu focal?

suppenkasper0815 · Jan 9th 2023

Code

desktop:/tmp$ sudo dpkg -i tvheadend_4.3-2070_g2beb6c9-dirty_xenial_amd64.deb 
[sudo] Passwort für alex: 
(Lese Datenbank ... 382189 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von tvheadend_4.3-2070_g2beb6c9-dirty_xenial_amd64.deb ...
Entpacken von tvheadend (4.3-2070~g2beb6c9-dirty~xenial) über (4.3-2027~ge3f4f22~xenial) ...
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von tvheadend:
 tvheadend hängt ab von libfdk-aac0 (>= 0.1.1); aber:
  Paket libfdk-aac0 ist nicht installiert.

dpkg: Fehler beim Bearbeiten des Paketes tvheadend (--install):
 Abhängigkeitsprobleme - verbleibt unkonfiguriert
Trigger für man-db (2.7.5-1ubuntu0.1~esm1) werden verarbeitet ...
Trigger für ureadahead (0.100.0-19.1) werden verarbeitet ...
Trigger für systemd (229-4ubuntu21.31+esm1) werden verarbeitet ...
Fehler traten auf beim Bearbeiten von:
 tvheadend

Display More

I got the solution by adding just this line

Code

sudo apt install libfdk-aac0

It's working like a charme!!!! - Great work! - Everything works fine, so I guess, you did the work and I did not use my own try to compile tvh...

But can you tell me if I should delete libdvbcsa1 again? - I mean this part worked out and I hope it is now patched, but not sure...

This information came also in the log:

Code

Das folgende Paket wurde automatisch installiert und wird nicht mehr benötigt:
  libdvbcsa1
Verwenden Sie »sudo apt autoremove«, um es zu entfernen.

suppenkasper0815 · Jan 7th 2023

Quote from samur

Quote from suppenkasper0815

Hi,

I search for D-Cube R2 a new version with icam. You need to compile it with su980 toolchain which was first arm sat receiver

can you try from here:

Post

RE: OSCam For Qnap/Nas [ arm ], [Private build]

OSCam-11718
OSCam-11718-798
;
###
Request, questions and helps : Here...!!!

samur

Dec 31st 2022

Or

Post

RE: OSCam For sf8008 and others [ boxes_Arch:arm ], [Private build]

OSCam-11718-798

List of STB's:
Octagon SF4008 4k
Octagon SF8008 4k
Octagon SF8008 Mini 4k
Octagon SX88 4k

###
Ax / Mutant HD 51 4k
Ax / Mutant HD 60 4k
Ax / Mutant HD 61 4k
Ax / Mutant HD 66 SE 4k

###
Edision OS mio 4k
Edision OS mio+ 4k
Edision Mini 4k

###
Gigablue Quad 4k
Gigablue UE 4k

###
Zgemma H7C 4k
Zgemma H7S 4k
Zgemma H9 combo 4k

###
Dreambox 900 4k
Dreambox 920 4k

##
Vuplus 4k
PULSe 4K
Wetek Play 2
Uclan Ustym 4k pro
Qviart Dual 4k
Anadol Multibox 4k, Ax multibox 4k, Novaler Multibox 4k, Maxytec Multibox 4k

;
###
…

samur

Dec 31st 2022

if not working please post an old working version.
thanks
;

Display More

Hey samur and atari,

would you please help to compile the fitting one. Maybe the toolchain "docker" could also work, but not sure what is the main issue. - Has it to do with the kernel 2.6.34? There is no newer image anymore.

i tried all of them, unfortunately always the same result:

Code

root@dcube:/tmp# uname -ar
Linux dcube 2.6.34 #1 SMP Tue Aug 6 03:37:04 UTC 2019 armv7l GNU/Linux
root@dcube:/tmp# ls -ls
     4 -rw-r--r--    1 root     root           122 Dec 25 18:48 ait.13
     4 -rw-r--r--    1 root     root           100 Dec  6 23:13 ait.17
     4 -rw-r--r--    1 root     root           280 Jan  2 20:10 ait.19
     4 -rw-r--r--    1 root     root           615 Dec  5 02:32 ait.26
     4 -rw-r--r--    1 root     root           129 Dec 25 18:48 ait.33
     4 -rw-r--r--    1 root     root           101 Dec 25 18:47 ait.688
     4 -rw-r--r--    1 root     root           128 Dec 25 18:48 ait.92
     4 -rw-r--r--    1 root     root           292 Dec 25 18:48 ait.96
     0 srwxrwxrwx    1 root     root             0 Jan  3 00:40 camd.socket
     0 srw-rw-rw-    1 root     root             0 Dec 19 16:19 hotplug.socket
     4 -rw-r--r--    1 root     root           126 Dec 19 16:19 infopanel.ver
     0 drwxr-xr-x    3 root     root            60 Nov 25 19:59 mediaportal
     4 -rw-rw-rw-    1 root     root            55 Nov 25 23:23 minisatip.log
  1428 -rwxr-xr-x    1 root     root       1451760 Jan  7 23:12 oscam-11718-798.coreelec_arm-libusb
  1676 -rwxr-xr-x    1 root     root       1704563 Jan  7 23:13 oscam-11718-798.qnap-arm-libusb
  1524 -rwxr-xr-x    1 root     root       1548379 Jan  7 23:13 oscam-11718.qnap-arm-libusb
     4 -rw-r--r--    1 root     root             5 Dec 19 17:47 powerup_without_waking_tv.txt
root@dcube:/tmp# oscam-11718-798.coreelec_arm-libusb
-bash: oscam-11718-798.coreelec_arm-libusb: command not found
root@dcube:/tmp# sh oscam-11718-798.coreelec_arm-libusb
oscam-11718-798.coreelec_arm-libusb: oscam-11718-798.coreelec_arm-libusb: cannot execute binary file
root@dcube:/tmp# ./oscam-11718-798.coreelec_arm-libusb
-bash: ./oscam-11718-798.coreelec_arm-libusb: No such file or directory
root@dcube:/tmp# chmod +x oscam-11718*
root@dcube:/tmp# ./oscam-11718-798.coreelec_arm-libusb
-bash: ./oscam-11718-798.coreelec_arm-libusb: No such file or directory
root@dcube:/tmp# /tmp/oscam-11718-798.coreelec_arm-libusb
-bash: /tmp/oscam-11718-798.coreelec_arm-libusb: No such file or directory
root@dcube:/tmp# mv /tmp/oscam-11718-798.coreelec_arm-libusb /tmp/oscam11718.bin
root@dcube:/tmp# sh oscam11718.bin 
oscam11718.bin: oscam11718.bin: cannot execute binary file
root@dcube:/tmp# ./oscam11718.bin 
-bash: ./oscam11718.bin: No such file or directory
root@dcube:/tmp# ./tmp/oscam11718.bin 
-bash: ./tmp/oscam11718.bin: No such file or directory
root@dcube:/tmp# sh oscam11718.bin
oscam11718.bin: oscam11718.bin: cannot execute binary file
root@dcube:/tmp# sh oscam-11718.qnap-arm-libusb
oscam-11718.qnap-arm-libusb: oscam-11718.qnap-arm-libusb: cannot execute binary file
root@dcube:/tmp# /usr/bin/OSCam_11
OSCam_11.716-r798  OSCam_11716-r798   
root@dcube:/tmp# /usr/bin/OSCam_11716-r798 
-bash: /usr/bin/OSCam_11716-r798: No such file or directory
root@dcube:/tmp# ./usr/bin/OSCam_11716-r798 
-bash: ./usr/bin/OSCam_11716-r798: No such file or directory
root@dcube:/tmp# sh /usr/bin/OSCam_11716-r798 
/usr/bin/OSCam_11716-r798: /usr/bin/OSCam_11716-r798: cannot execute binary file
root@dcube:/tmp# rm -rf /usr/bin/OSCam_11716-r798 
root@dcube:/tmp# sh /usr/bin/OSCam_11.716-r798 
/usr/bin/OSCam_11.716-r798: /usr/bin/OSCam_11.716-r798: cannot execute binary file
root@dcube:/tmp# /usr/bin/OSCam_11.716-r798 
-bash: /usr/bin/OSCam_11.716-r798: No such file or directory
root@dcube:/tmp# rm -rf /usr/bin/OSCam_11716-r798

Display More

The old one (oscam-trunk) is running fine and you can find it attached:

Code

root@dcube:/tmp# ls -ls /usr/bin/OS*
ls: /usr/bin/OS*: No such file or directory
root@dcube:/tmp# ls -ls /usr/bin/os*
  1484 -rwxr-xr-x    1 root     root       1517304 Jan  3 00:37 /usr/bin/oscam
  1156 -rwxr-xr-x    1 root     root       1181464 Jan 12  2022 /usr/bin/oscam-trunk
  1148 -rwxr-xr-x    1 root     root       1173264 Jan 28  2021 /usr/bin/oscam-trunk.old
root@dcube:/tmp# /usr/bin/oscam
-bash: /usr/bin/oscam: No such file or directory
root@dcube:/tmp# /usr/bin/oscam-trunk

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Sat Jan  7 23:18:48 2023
-------------------------------------------------------------------------------
2023/01/07 23:18:48 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11704 (arm-oe-linux-gnueabi)
2023/01/07 23:18:48 00000000 s     (main) System name    = Linux
2023/01/07 23:18:48 00000000 s     (main) Host name      = dcube
2023/01/07 23:18:48 00000000 s     (main) Release        = 2.6.34
2023/01/07 23:18:48 00000000 s     (main) Version        = #1 SMP Tue Aug 6 03:37:04 UTC 2019
2023/01/07 23:18:48 00000000 s     (main) Machine        = armv7l
2023/01/07 23:18:48 00000000 s     (main) Stb model      = dm800se
2023/01/07 23:18:48 00000000 s     (main) Stb boxtype    = cube
2023/01/07 23:18:48 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 10394

Display More

The compiler-info is:

OSCam: 1.20_svn Build: r11704 Compiler: arm-oe-linux-gnueabi

Some user told me I need the toochain of SU980

suppenkasper0815 · Jan 7th 2023

Quote from Tourt
My thanks go out to =[M.I.T.M]=

I made it It was a daily project, but it's running now.
First an update to Debian Bullseye from Buster. Then noticed that PHP was updated from 7.3 to 7.4, so other systems were no longer running ( Nextcloud ).
That was then repaired and it could finally start.
Code
sudo mkdir /var/tmp/tvheadend
sudo mkdir /var/tmp/libdvbcsa
I downloaded the 2 patches HERE and pushed them into the tmp directory. Adjusted rights.
Code
cd /var/tmp/libdvcsa
Git wanted to be installed:
Code
sudo apt-get install git-all
Then like =[M.I.T.M]= starting with this:
Code
sudo git clone https://github.com/glenvt18/libdvbcsa
cd libdvbcsa
sudo git config apply.whitespace nowarn
sudo git apply libdvbcsa.patch
./bootstrap
./configure
sudo make
sudo apt-get purge libdvbcsa-dev
sudo make install
Error
Make and Automake were not installed. So:
Code
sudo apt-get install make automake
Again:
Code
./bootstrap
That worked!
Continue with:
Code
sudo apt autoremove -y
sudo apt-get purge libdvbcsa1*
removed all the legacy stuff from Debian Buster and also removed the old TVHeadend (you should backup the .hts directories beforehand if you want to).
Then continue with the instructions of =[M.I.T.M]=
Code
sudo git clone https://github.com/tvheadend/tvheadend.git /var/tmp/tvheadend
cd /var/tmp/tvheadend
sudo git config apply.whitespace nowarn
sudo git apply /var/tmp/tvheadend/tvheadend43.patch
sudo./configure --disable-ffmpeg_static --disable-libfdkaac_static --disable-libtheora_static --disable-libopus_static --disable-libvorbis_static --disable-libvpx_static --disable-libx264_static --disable-libx265_static --disable-libfdkaac - -enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --disable-avahi --disable-dbus_1 --disable-bintray_cache --disable-execinfo --disable-hdhomerun_static - -disable-hdhomerun_client --disable-libav --enable-pngquant --enable-trace --enable-vaapi --infodir=/usr/share/info --localstatedir=/var --mandir=/usr/share/man --prefix=/usr --cc=cc --arch=x86_x64 --platform=linux --python=python3 --sysconfdir=/config
sudo make -j$(nproc)
A lot of things come up here. On the one hand I had to install libtools and others because of missing dependencies.
Also, I chose the
Code
-disable-libav option instead of -enable-libav. 
Otherwise there was another error. Then the test run with
Code
./build.linux/tvheadend –noacl
It worked!
Then the Autobuild.sh adjusted according to the specifications of =[M.I.T.M]=
Code
cd /var/tmp/tvheadend/Autobuild
sudo nano debian.sh
add argument '-d' to dpkg-buildpackage to remove libdvbcsa-dev dependancy: dpkg-buildpackage -d -b -us -uc
save debian.sh
sudo AUTOBUILD_CONFIGURE_EXTRA="--disable-ffmpeg_static --disable-libfdkaac_static --disable-libtheora_static --disable-libopus_static --disable-libvorbis_static --disable-libvpx_static --disable-libx264_static --disable-libx265_static --disable-libfdkaac - -enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --disable-avahi --disable-dbus_1 --disable-bintray_cache --disable-execinfo --disable-hdhomerun_static - -disable-hdhomerun_client --disable-libav --enable-pngquant --enable-trace --enable-vaapi --infodir=/usr/share/info --localstatedir=/var --mandir=/usr/share/man --prefix=/usr --cc=cc --arch=x86_x64 --platform=linux --python=python3 --sysconfdir=/config" ./Autobuild.sh -j$(nproc)
Again, disable libav.

Nevertheless, no autobuild came about. Until I figured out what was missing. So I installed
Code
sudo apt-get install debhelper liburiparser-dev libpcre2-dev libpcre3-dev
That's it, the package is created and can be installed via:
Code
cd /var/tmp
sudo dpkg -i tvheadend………
Finally, I can say that the SAT>IP server runs on TVHeadend and works just as well as the VLC stream.
Oh, and I didn't touch the existing OSCAM!

PS: I hope I have thought of everything.
PPS: Since I didn't give myself superuser rights beforehand, everything only worked with sudo.
Display More

Hey guys,

great work and instruction.

Unfortunately I have still trouble with compiling TVH myself with that instruction.

Here is my output: https://pastebin.com/iNrnSHkC

It seems like I have troube with libav, ffmpeg and libdrm.

My system is Ubuntu 16.04 with ESM-Support and all updated packages.

I just think the environment is not the easiest. Is there maybe a workaround to use standard tvh or that the patch will be implemented in the native tvh code?

Is it maybe possible to cross-compile on my newer machine and put it back to my ubuntu 16.04 server?

suppenkasper0815 · Jan 2nd 2023

Hi Guys,

I am using a wetek play alias "Openelec" Box with 2xDVB-S2 Tuner and Libre Elec 9.0.2.

This was the last version I got for this box. It was running very satisfying for a while, but since the "icam-problems" I would love to get a fix for it. I guess I need to recompile TVHeadend somehow and also need a newer Oscam-Version with Stream-Relay support.

So I would love if someone could help with instructions or maybe i best case a ready made solution. There are a lot of solutions for other boxes already there, so I pray for some possibilites.

Cheers and happy programming 2023.

suppenkasper0815 · Jan 2nd 2023

Hi,

I search for D-Cube R2 a new version with icam. You need to compile it with su980 toolchain which was first arm sat receiver

suppenkasper0815 · Dec 20th 2022

Hi guys,

I need a new version for my D-Cube R2 with Icam support. I could also try to compile by myself, but can't find a good how-to or toolchain for crosscompiling.

Here are the information about the box:

Code

root@dcube:/tmp# uname -ar
Linux dcube 2.6.34 #1 SMP Tue Aug 6 03:37:04 UTC 2019 armv7l GNU/Linux
root@dcube:/tmp# 



oscam

Unix starttime: 1671466637
Starttime:      19.12.2022 17:17:17
Version:        oscam-1.20_svn-r11704
Compiler:       arm-oe-linux-gnueabi
Box type:       cube (generic)
PID:            23385
TempDir:        /tmp/.oscam
GBox tmp_dir:   not defined using: /tmp/.oscam
ConfigDir:      /etc/tuxbox/config/oscam-trunk/
WebifPort:      83

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 yes
SSL support:                             yes
DVB API support:                         yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
Irdeto guessing:                         yes
Anti-cascading support:                  no
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  no
Cache exchange AIO support:              no
CW Cycle Check support:                  no
LCD support:                             yes
LED support:                             yes
Clockfix with realtime clock:            no
IPv6 support:                            no

Display More

suppenkasper0815 · Nov 25th 2022

update:

I changed the packages to some older versions and stay now here:

Code

:~$ sudo apt install build-essential git ccache libpcre3-dev pkg-config libssl-dev bzip2 wget unzip libavahi-client-dev zlib1g-dev libavcodec-dev libavutil-dev libavformat-dev libswscale-dev libavresample-dev gettext cmake libiconv- hook-dev liburiparser-dev debhelper libcurl4-gnutls-dev python2.7-minimal libdvbcsa-dev python3-requests libx264-dev libx265-dev libvpx-dev libopus-dev dvb-apps libva-dev libva-drm1 libva-x11-1 libsystemd -dev ffmpeg libavcodec-extra libavcodec-extra libavdevice-dev libavfilter-dev libav-tools libpcre2-dev libpcre2-16-0 libpcre2-32-0 librecode0 recode libhdhomerun-dev
Reading package lists... Done
Dependency tree is built.
Status information is read in.... Done
build-essential is already the latest version (12.1ubuntu2).
ccache is already the latest version (3.2.4-1).
debhelper is already the latest version (9.20160115ubuntu3).
debhelper was set to be installed manually.
pkg-config is already the latest version (0.29.1-0ubuntu1).
bzip2 is already the latest version (1.0.6-8ubuntu0.2).
cmake is already the latest version (3.5.1-1ubuntu3).
gettext is already the latest version (0.19.7-2ubuntu3.1).
python3-requests is already the latest version (2.9.1-3ubuntu0.1).
python3-requests was set to be installed manually.
wget is already the latest version (1.17.1-1ubuntu1.5).
ffmpeg is already the latest version (7:2.8.17-0ubuntu0.1+esm4).
libavcodec-extra is already the latest version (7:2.8.17-0ubuntu0.1+esm4).
libavcodec-extra was set to be installed manually.
git is already the latest version (1:2.7.4-0ubuntu1.10+esm3).
python2.7-minimal is already the latest version (2.7.12-1ubuntu0~16.04.18+esm2).
python2.7-minimal was set to be installed manually.
unzip is already the latest version (6.0-20ubuntu1.1+esm1).
zlib1g-dev is already the latest version (1:1.2.8.dfsg-2ubuntu4.3+esm2).
libpcre3-dev is already the latest version (2:8.44-2+ubuntu16.04.1+deb.sury.org+1).
libpcre3-dev was set to be installed manually.
libssl-dev is already the latest version (1.1.1k-1+ubuntu16.04.1+deb.sury.org+0).
libva-drm1 is already the latest version (1.7.3~xenial).
libva-drm1 was set to be installed manually.
libva-x11-1 is already the latest version (1.7.3~xenial).
libva-x11-1 was set to be installed manually.
Some packages could not be installed. That can mean that
You have requested an impossible situation or if you are the
Unstable distribution that still use some required packages
have not been created or have not yet left Incoming.
The following information may help you to resolve the situation:

The following packages have unmet dependencies:
 libpcre2-dev : Depends on: libpcre2-8-0 (= 10.21-1) but 10.36-2+ubuntu16.04.1+deb.sury.org+2 should be installed
 libva-dev : Depends on: libva-drm1 (= 1.7.0-1ubuntu0.1) but 1.7.3~xenial is about to be installed
             Depends on: libva-wayland1 (= 1.7.0-1ubuntu0.1) but 1.7.3~xenial should be installed
             Depends on: libva-x11-1 (= 1.7.0-1ubuntu0.1) but 1.7.3~xenial should be installed
             Depends on: libva1 (= 1.7.0-1ubuntu0.1) but 1.7.3~xenial is about to be installed
E: Unable to correct problems, you have held defective packages.

Display More

But there are no defective packages. It's just the issue of the unmet depencies...

suppenkasper0815 · Nov 23rd 2022

Any news or update?

Here are the oscam webif-informations:

Code

OSCam Webinterface developed by Streamboard Team
Current Time: 23.11.22 | 16:31:13 Start Time: 04.07.22 | 23:43:14 OSCam Run Time: 141d 17:47:59
Process ID: 933 Access from: 10.0.6.2 Run as: root cube Up Time: 16d 02:20:42
OSCam: 1.20_svn Build: r11704 Compiler: arm-oe-linux-gnueabi

suppenkasper0815 · Nov 17th 2022

I have always trouble with my sat card drivers and decided for esm on the 16.04 machine.

So isn't it possible with 16.04?

suppenkasper0815 · Nov 15th 2022

May you help me with pre-requirements under Ubuntu 16.04?

Code

sudo apt install build-essential git ccache libpcre3-dev pkg-config libssl-dev bzip2 wget unzip libavahi-client-dev zlib1g-dev libavcodec-dev libavutil-dev libavformat-dev libswscale-dev libavresample-dev gettext cmake libiconv-hook-dev liburiparser-dev debhelper libcurl4-gnutls-dev python2-minimal libdvbcsa-dev python3-requests libx264-dev libx265-dev libvpx-dev libopus-dev dvb-apps libva-dev libva-drm2 libva-x11-2 libsystemd-dev ffmpeg libavcodec-extra libavcodec-extra58 libavdevice-dev libavfilter-dev libavfilter-extra libpcre2-dev libpcre2-16-0 libpcre2-32-0 librecode0 recode libhdhomerun-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
E: Paket python2-minimal kann nicht gefunden werden.
E: Paket libva-drm2 kann nicht gefunden werden.
E: Paket libva-x11-2 kann nicht gefunden werden.
E: Paket libavcodec-extra58 kann nicht gefunden werden.
E: Paket libavfilter-extra kann nicht gefunden werden.

Quote from =[M.I.T.M]=

Hi,

My guide was based on the assumption that required packages are already installed on a system.

If not the case, recommend to do the following as very first step.

Code

apt update && apt upgrade -y
sudo dpkg-reconfigure tzdata
reboot
sudo apt install build-essential git ccache libpcre3-dev pkg-config libssl-dev bzip2 wget unzip libavahi-client-dev zlib1g-dev libavcodec-dev libavutil-dev libavformat-dev libswscale-dev libavresample-dev gettext cmake libiconv-hook-dev liburiparser-dev debhelper libcurl4-gnutls-dev python2-minimal libdvbcsa-dev python3-requests libx264-dev libx265-dev libvpx-dev libopus-dev dvb-apps libva-dev libva-drm2 libva-x11-2 libsystemd-dev ffmpeg libavcodec-extra libavcodec-extra58 libavdevice-dev libavfilter-dev libavfilter-extra libpcre2-dev libpcre2-16-0 libpcre2-32-0 librecode0 recode libhdhomerun-dev

That will install everything required as packages.

Display More

suppenkasper0815 · Nov 7th 2022

Hi guys,

I need help to get on my DCube R2 Box with ARM32 processor running again. My last version was Oscam 11.689 and I remember somthing with "Kernel-Change-Things". Unfortunately I can't get running a up-to-date oscam 11.714 or 11.715. I guess there is some special thing. Also the "all.ipk" doesn't create a working oscam. It says "you have ARM processor", but I can't execute the oscam.

I get always the information:

Code

root@dcube:/tmp# uname -ar
Linux dcube 2.6.34 #1 SMP Tue Aug 6 03:37:04 UTC 2019 armv7l GNU/Linux
root@dcube:/tmp# /usr/bin/oscamicam
-bash: /usr/bin/oscamicam: No such file or directory
root@dcube:/tmp# ls -ls /usr/bin/oscam*
  1156 -rwxr-xr-x    1 root     root       1181464 Jan 12  2022 /usr/bin/oscam-trunk
  1148 -rwxr-xr-x    1 root     root       1173264 Jan 28  2021 /usr/bin/oscam-trunk.old
  1216 -rwxr-xr-x    1 root     root       1243040 Nov  7 12:42 /usr/bin/oscamicam
root@dcube:/tmp# 
...
Please Wait while we Download And Install enigma2-plugin-softcams-oscam ...
Installing enigma2-plugin-softcams-oscam (11715-emu) on root.
OE2.0 IMAGES: libssl.1.0.2
OE2.0 IMAGES: libcrypto.1.0.2
Configuring alsa-state.
No state is present for card CX2450
Found hardware: "CX2450" "CX2450_Mixer" "" "" ""
Hardware is initialized using a generic method
No state is present for card CX2450
Configuring enigma2-plugin-softcams-oscam.
==================================================
:I'm checking your device processor ...
:Your Device IS ARM processor ...
openATV image
==================================================
:I'm checking your config OSCam ...
  send: oscam.provid ... file
  send: CCcam.cfg ... file
==================================================
update-rc.d is /usr/sbin/update-rc.d


-------------------------------------------------------
* Oscam Config & Softcam files in [/etc/tuxbox/config] *
-------------------------------------------------------


*******************************************
*             Install Finished            *
*                                         *
*         Need To Restart Enigma2         *
*                                         *
*    Patched and compile By MOHAMED_OS    *
*                                         *
*******************************************
Collected errors:
top - 13:24:35 up 125 days, 14:41,  2 users,  load average: 2.30, 2.15, 2.05
Tasks: 104 total,   1 running, 103 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  6.7 sy,  0.0 ni, 93.3 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :    244.0 total,     27.0 free,    148.6 used,     68.5 buff/cache
MiB Swap:      0.0 total,      0.0 free,      0.0 used.     64.9 avail Mem 

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND                                                                                                  
19910 root      20   0    3168   1232    884 R  10.0   0.5   0:00.12 top                                                                                                      
    1 root      20   0    1584    332    260 S   0.0   0.1   0:51.42 init                                                                                                     
    2 root      20   0       0      0      0 S   0.0   0.0   0:00.16 kthreadd                                                                                                 
    3 root      rt   0       0      0      0 S   0.0   0.0   0:00.00 migration/0                                                                                              
    4 root      20   0       0      0      0 S   0.0   0.0   0:01.19 ksoftirqd/0                                                                                              
    5 root      20   0       0      0      0 S   0.0   0.0  28:25.95 events/0                                                                                                 
    6 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuset                                                                                                   
    7 root      20   0       0      0      0 S   0.0   0.0   0:00.28 khelper                                                                                                  
   10 root      20   0       0      0      0 S   0.0   0.0   0:00.00 async/mgr                                                                                                
  139 root      20   0       0      0      0 S   0.0   0.0   0:00.00 sync_supers                                                                                              
  141 root      20   0       0      0      0 S   0.0   0.0   0:00.14 bdi-default                                                                                              
  143 root      20   0       0      0      0 S   0.0   0.0   0:00.02 kblockd/0                                                                                                
  151 root      20   0       0      0      0 S   0.0   0.0   0:00.00 ata/0                                                                                                    
  152 root      20   0       0      0      0 S   0.0   0.0   0:00.00 ata_aux                                                                                                  
  157 root      20   0       0      0      0 S   0.0   0.0   0:00.00 khubd                                                                                                    
  160 root      20   0       0      0      0 S   0.0   0.0   0:00.00 kseriod                                                                                                  
  170 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cfg80211                                                                                                 
  182 root      20   0       0      0      0 S   0.0   0.0   0:00.01 rpciod/0                                                                                           top - 13:24:43 up 125 days, 14:41,  2 users,  load average: 2.26, 2.14, 2.05
Tasks: 104 total,   1 running, 103 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.7 us,  1.3 sy,  0.3 ni, 97.4 id,  0.0 wa,  0.0 hi,  0.3 si,  0.0 st
MiB Mem :    244.0 total,     26.9 free,    148.7 used,     68.5 buff/cache
MiB Swap:      0.0 total,      0.0 free,      0.0 used.     64.8 avail Mem 

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND                                                                                            
  913 root      20   0    2512    280    200 S   0.0   0.1   0:02.52 klogd                                                                                              
  916 root      20   0    2512     68      0 S   0.0   0.0   0:00.00 telnetd                                                                                            
  950 root      20   0    3836    368    152 S   0.0   0.1   0:00.00 vsftpd                                                                                             
  954 root      20   0    2908    764    252 S   0.0   0.3   1:58.83 crond                                                                                              
 1429 root      20   0    4132    632    392 S   0.0   0.3   0:44.57 iperf3                                                                                             
19629 root      20   0    2444   1040    844 S   0.0   0.4   0:00.53 dropbear                                                                                           
19631 root      20   0    3568   1844   1412 S   0.0   0.7   0:00.09 bash                                                                                               
19636 root      20   0       0      0      0 S   0.0   0.0   0:00.60 flush-ubifs_0_4                                                                                    
19666 root      20   0       0      0      0 S   0.0   0.0   0:00.00 flush-8:1-fuseb                                                                                    
19751 root      20   0    2600   1104    956 S   0.0   0.4   0:00.04 enigma2.sh                                                                                         
19877 root      20   0       0      0      0 S   0.0   0.0   0:00.00 kdvb-ad-0-fe-1                                                                                     
28230 root      20   0    3460    388      0 S   0.0   0.2   0:00.08 bash                                                                                               
28685 root      20   0   12228    792    204 S   0.0   0.3 158:24.19 minisatip                                                                                          























root@dcube:/tmp# /usr/bin/oscam
oscam-trunk      oscam-trunk.old  oscamicam        
root@dcube:/tmp# /usr/bin/oscam
oscam-trunk      oscam-trunk.old  oscamicam        
root@dcube:/tmp# /usr/bin/OSCam_11715-r798 
-bash: /usr/bin/OSCam_11715-r798: No such file or directory
root@dcube:/tmp# sh /usr/bin/OSCam_11715-r798 
/usr/bin/OSCam_11715-r798: /usr/bin/OSCam_11715-r798: cannot execute binary file
root@dcube:/tmp# ./usr/bin/OSCam_11715-r798 
-bash: ./usr/bin/OSCam_11715-r798: No such file or directory
root@dcube:/tmp#

Display More

Oscam-trunk Version is running.

Would love to get some support.

suppenkasper0815 · Aug 3rd 2022

Hey, great work! - The Box is running very well at the moment! Encryption is working and also satpi! Great work! - I were also able to tune 8PSK Multistream on 9E, but no luck with 16APSK TP. Is it a known bug? - With my SF8008 everything is getting tuned with 16APSK. - I think there are some trouble with "root"-implementation since every search-try shows "gold" instead of "root".

suppenkasper0815 · Aug 3rd 2022

Hey, just wanna let you know with the openatv6.4 verison here from the forum the time works and also "SatPI" with encrypted Channels (So STI7111 is server), oscam get decoding done, but no picutre on the screen. i think that has something to do with the timestamps here. Maybe someone will find a solution and please let me know.

suppenkasper0815 · Aug 3rd 2022

Hey,

my congratulations! It is working very well so far and finally also "SatPI"-Server on OATV6.4 is working for encrypted channels with this verison! - Time stamp is also correct!

But my issue is now, that i installed newest oscam and get keys, but no picture on the TV. My log saids "decoded" as usual, but it is not showing any picture on the screen.

Could you please help?

suppenkasper0815 · Aug 15th 2019

Hi,

I am a bit desperated. I search since a weeks for a new build of osebuild oscam or an android-version with CACHEX, dvbapi and Newcamd support. I need the following services but I can't compile or find it by myself...

Code

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 no
SSL support:                             no
DVB API support:                         yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
Irdeto guessing:                         yes
Anti-cascading support:                  no
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  yes
CW Cycle Check support:                  yes
LCD support:                             no
LED support:                             no
Clockfix with realtime clock:            no
IPv6 support:                            yes

camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    yes
radegast:                                no
scam:                                    yes
serial:                                  yes
constant CW:                             yes
Pandora:                                 no
ghttp:                                   no

Reader support:                          yes

Nagra:                                   yes
Nagra Merlin:                            yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                yes
Bulcrypt:                                yes
Griffin:                                 yes
DGCrypt:                                 yes

cardreader_phoenix:                      yes
cardreader_drecas:                       no
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_sci:                 yes
cardreader_sc8in1:                       yes
cardreader_mp35:                         yes
cardreader_smargo:                       yes
cardreader_pcsc:                         yes
cardreader_smartreader:                  yes
cardreader_db2com:                       no
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_stinger:                      yes

Display More

i would love to get some help and maybe someone who wanna compile this for me. I wanna run a server on an Android-TV-Box with Android 5.1 and maybe on a Box with Android 6 and later if it works with Android 7.

It worked actually, but it has still Oscam Build 11431 which is unfortunately pretty much outdated

Posts by suppenkasper0815

[Samur Private OSCam] - Request for compilation, questions and help !!!

Micro freezers on caid 1830 (HDPlusp

Oscam Icam Sky DE and UK

TVHeadend Docker Image with ICAM Support x64 and ARMv7 (PI 4 & 3b+)

Oscam Icam TVHeadend

[Samur Private OSCam] - Request for compilation, questions and help !!!

Oscam Icam TVHeadend

WeTek Play / Openelec Box with DVB-S2 and TVHeadend searching for ICAM-Patch with Libre Elec 9.0.2

[Samur Private OSCam] - Request for compilation, questions and help !!!

DCube R2 with Toolchain SU980 and icam support needed

Oscam Icam TVHeadend

Need new *oscam for ARMv7l with Kernel 2.6.34 (DCube - R2) with icam

Oscam Icam TVHeadend

Oscam Icam TVHeadend

Need new *oscam for ARMv7l with Kernel 2.6.34 (DCube - R2) with icam

openatv-6.4-amiko8900-50502022_usb for spark 7111 built by ahmed gazye

wrong time on open atv 6.4

openatv-6.4-amiko8900-50502022_usb for spark 7111 built by ahmed gazye

Need help for Andorid 5.1 oscam-build with arm-androideapi for new oscam 11537 or newer osebuild