:thumbup::thumbup:Thanks KiddacC for your suggestion. What i did was that I used Putty to put Xtream Tv plugin into the box, then I got the details( Mac address) whoich I sent out and was on. I never did anything like that before so I am surprised that it works. I thank you all on the forum for your advice and help.
Posts by cpo312
-
-
Hi
I have successfully flashed my dm 800hd se with an Openvision 10.2 image. Now I want to put IPTV on the box but I do not know how to go about it. I have read up about plugins but it is all confusing and I do not know which one to use and how to go about it. Please sombody explain to me the steps to take and all I have to do to have IPTV on the box.
-
Phew. I am happy to say that I finally was able to put an open pli image on the box.
Thank you georgeflu for all your help and instruction on how to do this. Much appreciated.
I cannot say exactly what the problem was but I used the Optiflasher and after I flashed the second stage
loader Sim2_800se_ SSL84D then I got the openpli image there and flashed it on the box. It said "Invalid Image" "Dreambox successfully flashed" Then I flashed it again with the Sim2_800se_ SSL84D. Voila!
I belive that what I was doing wrong was that I did not flash the box the second time again with the Sim2_800se_ SSL84D after flashing the image. Thanks also to teak-won-do for your input.
-
Hi
Back again. Now as georgeflu advised I flashed the second stage loader with the dreambox optiflasher and it says
"dreambox flashed successfully" Now what is the next step to put an image in the box? I did not reboot the box yet.
-
Please how can I upgrade the second stage to ssl84d like you suggested. I cannot find any ssl 84b images. It seems that most images are ss84d
-
It says Boot #84B. I do not know if the image I am trying to load is #84B because I do not know if it is or how to get a matching image. It says second stage OK! Then when I put image it says Invsli Image!
dreambox flashed successfully. The yellow bar on the box loads till halfway and stops.
-
The box is a sim 2 clone, When flashing with Optiflash it says second stage Ok, Then it says put I address from the box which I did. Then it say select image which I do then it continues to falsh. At the end it says:
Invalid Image !
Dreambox flashed successfully !
-
Hi guys
I have been trying to flash my dm 800hd se box for a long time with no joy. On turning the box on it says boot no. 84B. I am using the Optiflasher and it says " invalid image. dreambox flashed successfully" each time I try an image. I have tried different open pli images. I do not know what I am doing wrong at this time. Please help somebody.
-
i think you must have 1 of the old firmwares
upgrade that to a later version and should work
youporn doesnt work just freezes so i wouldnt even try to get that to work
Thanks mate for the input. Just want Youtube to work. Please can you point me to a latest Slybox F3 firmware that has working Youtube apps. Thanks again.
-
Hi guys. Please can someone point ime to the right direction here. I have a new ***box F3 and everything is installed and working fine. The problem is that when I try to play Youtube in Network Apps, it says "loading please wait" and then I wait for days and nothing happens just loading. Please help some one and poit me to a good software to use. Thanks all.
-
Does anybody know how to flash a new image into the INET500s linux box. I just got hold of one and the specs say that it is just like Dreambox500s. but they use DvbUp as a flash software which is different from dm500s flashing. Any Ideas or tutorials guys will be appreciated.
-
-
Sorry guys took a while getting back on. I used the dreambox edit and uploaded the channel settings list to the dreambox but i observed that only the scanned channel list worked. The signal still shows Snr 63%, Agc 93%, Ber 0% or sometimes Snr. 64%, Agc 93%, Ber 886% in order words no joy. this is a fairly new box and so I want to really be sure that it is no good before chucking it away
-
Hi guys.
I have just scanned my dm 500s on 28.2e and I just get 25 services scanned and sometimes nothing. The signals read Snr 65%, Agc 93%, Ber 0%. It just get a few channels scanned thats all and I do not get all the channels. I am using the Open pli beta image. Any help, ideas or suggestion will be appreciated. Thanks
-
Within the router? No I have not given the Dm500s a static ip address within the router because I do not know about giving a Dm500s box a static address within the router. I only know about portforwarding within the router. or are they the same thing?
-
Hi guys.
I have just set up this dreambox 500s system and all is working well I can open all channels. But anytime I turn up my laptop which is connected to my router wirelessly, the picture on my tv freezes or pauses. I do not know what is causing this. I have racked my brains but I came up with no answer. I suspect my network set up but I am not sure how to tackle this. So guys I would appreciate any solutions to solving this problems. Thanks
-
Hi Scrote you must follow all the instructions given to you by everybody on the forum.
Check out this attachment maybe it will help you out. credit given to B. Stewart
DreamUpFlashProcess.pdf -
Always the best Ten. Thanks for the new link. I just like the way you work it mate. "Hey link dead. Okay no problem. here is a new one boom" Please keep up the good work guys. Thanks.
-
Hi guys:
I had just got a dreambox dm 500s as a second box which worked fine with all the freeview channels. But recently I turned it on and all I saw was the Nabilostat image show on the screen for a few seconds and then the screen goes black for a couple of seconds, then the Nabilostat image will show on the screen again then goes black. This goes on and off untill I switch off the box manually. Any idea what could be the reason why this is so. I want to be sure about the box before I chuck it away -
Sorrry richard_t I was out of town for a while so couldn't finish the task then. Thanks for your tips and suggestions I was able to install another CCcam(2.2.1) into the box through yellow button on the remote. I restarted CCcam and then used the DCC to ftp cccam.cfg and it was there. I could get to the cccam.cfg file now which I could not see before. I think that the main reason I could not see a cccam.cfg file at first was that the default CCcam(cccam 2.1.3) that came with the Nabilostar darkstar II was corrupt or damaged so when I downloaded a new CCcam 2.2.1, I could ftp cccam.cfg. For your patience and tips I am very grateful to you and the other contributors to thread. Now when I open cccam.cfg there are so many lines with # in their front. I am stuck with all these lines and do not know what next step take.