Posts by levi45

so after instalation and rebooting the box , you saying plugin not showing on extension menu ?.

Quote from pabloweb

Strange problem:

I have installed the plugin but i don't view the plugin in plugin list (green button). I don't know how start it..... please any help?

OpenATV 7.6 on VU+ Ultimo 4k

tk

Please read first post

Quote from Blink44

i put like u say but only with stream realay by biko33 open

You must be doing something wrong. Please read my post on my oscam download section , and make sure you doing everything correctly.

Quote from Blink44

on me not open without stream relay, imagine open atv 7.6 i have ....

It will work if you did everything i write on my post and replace config files.

Quote from pinokio0

Quote from malubu

Hello, Sir first of all, congratulations on your work.

I am using the Merlin_OE-2.6-dreamtwo-experimental-20241130 software.

I am currently using the Oscam-emu-levi45_11942 version.

I added the Oscam config file you shared, however the channels did not open on my device.

Thank you in advance for your help.

Install Oscam 11943 and try it.

Display More

Please don't confuse anyone only work if you have latest opensource image like openatv , open bh ,etc etc . Other images still carry on same as before.

Quote from paulHG

Hallo zusammen,

Ich habe Gigablue quad 4K pro mit openatv 7.6.0….oscam-emu-levi45_11943….Ist auf dem Gigablue installiert.

Frage : muss ich „Sender mit Stream Relay Abspielen“ einstellen?

Quote from paulHG

Hallo, vielen Dank!

Frage:„Dann installiere alle Einstellungen ohne Stream-Relais/Whitelist.“, Wo finde ich die Einstellungen?

Meinst du die oscam.conf aus dem Download?

Please write in English thanks.

Quote from malubu

Hello, Sir first of all, congratulations on your work.

I am using the Merlin_OE-2.6-dreamtwo-experimental-20241130 software.

I am currently using the Oscam-emu-levi45_11942 version.

I added the Oscam config file you shared, however the channels did not open on my device.

Thank you in advance for your help.

Read my full post you understand why not working .

Now all my oscam support softcsa ,so to watch sky channels with it then you need to have latest build opensource images .(like openatv,openbh ,etc etc). Then install any settings without stream relay/whitelist. Then install my oscam ( i prefer you use my levi45 multicam manager ) and change oscam.conf with attached below . And add your cline or download via levi45freeserver reboot your box and restart your oscam and watch sky channels from channel list .

Quote from abu baniaz

Can you please confirm if your version includes the extended_cw option needed for softcsa?

Yes it has my friend

Quote from pabloweb

Quote from Verdeoro

Compiled by Levi45

Oscam icam patch 11940 with emu r803 ipk/deb for all e2/sh4 boxes and image

fixed issue with arm/mips dream boxes thanks for reporting kalkan99 and Lomaks

Thanks Levi45

with ccam patch fix or not?

Display More

not fixed

Quote from paulHG

Quote

Hallo zusammen,

habe Gigablue quad 4K pro mit openatv 7.6.0 möchte ….oscam-emu-levi45_11943….auf die Box bringen. Habe schon mal ein Oscam mit USB-Stick installiert, meldet sich von selbst und dann Erweiterung installieren usw.

Die Frage ist ob das mit ….oscam-emu-levi45_11943….auch so möglich ist?

Ja und wie kann ich zum Test war hell bekommen, sorry bin Anfäünger.

Hello everyone,

I have Gigablue quad 4K pro with openatv 7.6.0 and would like to install .oscam-emu-levi45_11943... on the box. I have already installed Oscam with a USB stick, it logs in automatically and then installs the extension, etc.

The question is whether this is also possible with ...oscam-emu-levi45_11943....?

Display More

yes long as use ipk files

Compiled by Levi45

Oscam icam patch 11943 with emu r803 ipk/deb for all e2/sh4 boxes and image

Quote from amirsaman

hey guys

How can I remove levi-45 cammanager from openatv 7.6 on dm520?

I couldn't find the package on software management ---> manage Plugins

Couldn't remove the package using these commands

opkg remove enigma2-plugin-softcam-levi45cam-manager

opkg remove --force-depends enigma2-plugin-softcams-levi45cammanager

Couldn't found the cammanager folder on this directory either

/usr/lib/enigma2/python/Plugins/Extensions/

Any help will be appreciated

Regards

Display More

it should be

enigma2-plugin-extensions-levi45multicammanager

Quote from kalkan99

Until very recently, I was using the "ARM and SSL 102" version of the Oscam you compiled without any problems.

Problems started to arise in the last two versions.

I haven't tried the "ARM and SSL 310" version in Open Software.

can you try this one please

Quote from kalkan99

The problem persists with the latest version 11940 Oscam.

DreamBox 920 OE 2.5 does not work with Merlin software.

Whats is your openssl version ? and your dreambox is just arm boxes is in it ?

can you try this please

Compiled by Levi45

Oscam icam patch 11939 with emu r803 ipk/deb for all e2/sh4 boxes and image

Quote from Mahmoud Hussein

Quote from levi45

Quote from Mahmoud Hussein

Quote from levi45

Quote from Mahmoud Hussein

Quote from levi45

Quote from digidany

levi45

I just changed on my DM920 from Oscam 11906 by deepblue2000 to your 11906 (OSCam_11906-803-arm-ssl102)
and Tivusat EMM runs great! Thank you!

Unfortunately the emu for AFN (9 East) and ANT1Europe (Viaccess 9 East) are not working with your version.
Do I need to activate anything in your Webinterface?

When I switch back to 11906 by deepblue2000 both are working again.

Please help me to solve the problem. Thank you!

Display More

For me without doing anything works fine with correct keys

1.jpg

Display More

Would you please revise the telnet command? It is not working for me

Display More

command is the same my friend

Code

wget -q "--no-check-certificate" https://raw.githubusercontent.com/levi-45/Levi45Emulator/main/installer.sh -O - | /bin/sh 

Display More

root@sf8008:~# wget -q "--no-check-certificate" https://raw.githubusercontent.…mulator/main/installer.sh -O - | /bin/sh

Detected OS: Enigma2

Downloading version 11936...

Installing...

error: pkg_init_from_file: Malformed package file /tmp/enigma2-plugin-softcams-oscam-emu-levi45_11936-803_all.ipk.

Installation completed successfully!

Please Restart GUI...

root@sf8008:~#

Display More

Witch image version and Witch box please thanks .

Display More

Openatv 7.6

Octagon sf8008

Display More

this is from octagon sf8008 and openatv 7.6

root@sf8008:~# wget -q "--no-check-certificate" https://raw.githubusercontent.com/levi-45/Levi45Emulator/main/installer.sh -O - | /bin/sh 
Detected OS: Enigma2
Downloading version 11936...
Installing...
Installing enigma2-plugin-softcams-oscam-emu-levi45 (11936) on root
OE2.0 IMAGES: libssl3
OE2.0 IMAGES: libcrypto3
OE2.0 IMAGES: glibc 2.42+git
Configuring enigma2-plugin-softcams-oscam-emu-levi45.
<--------------------------------------------->
:Checking your device processor ...
:Your Device IS ARM processor ...
openATV image
<--------------------------------------------->
:Installing fresh OSCam config files (only if they don't exist)...
  Installed: oscam.conf
  Installed: oscam.dvbapi
  Installed: oscam.provid
  Installed: oscam.server
  Installed: oscam.services
  Installed: oscam.user
  Installed: CCcam.cfg
  Installed: AutoRoll.Key
  Installed: constant.cw
  Installed: oscam.fs
  Installed: oscam.srvid2
  Installed: SoftCam.Key
<--------------------------------------------->


-------------------------------------------------------
* Oscam Config & Softcam files in [/etc/tuxbox/config] *
-------------------------------------------------------


*******************************************
*             Install Finished            *
*                                         *
*         Need To Restart Enigma2         *
*                                         *
*             Compiled By Levi45          *
*                                         *
*******************************************
Installation completed successfully!
Please Restart GUI...
root@sf8008:~# 

Quote from ocs

Good morning, everyone. I need a working, up-to-date VPS version running Ubuntu 24.04. Thank you. levi45

Posted 5/6 message above not working?

Quote from Mahmoud Hussein

Quote from levi45

Quote from Mahmoud Hussein

Quote from levi45

Quote from digidany

levi45

I just changed on my DM920 from Oscam 11906 by deepblue2000 to your 11906 (OSCam_11906-803-arm-ssl102)
and Tivusat EMM runs great! Thank you!

Unfortunately the emu for AFN (9 East) and ANT1Europe (Viaccess 9 East) are not working with your version.
Do I need to activate anything in your Webinterface?

When I switch back to 11906 by deepblue2000 both are working again.

Please help me to solve the problem. Thank you!

Display More

For me without doing anything works fine with correct keys

1.jpg

Display More

Would you please revise the telnet command? It is not working for me

Display More

command is the same my friend

Code

wget -q "--no-check-certificate" https://raw.githubusercontent.com/levi-45/Levi45Emulator/main/installer.sh -O - | /bin/sh 

Display More

root@sf8008:~# wget -q "--no-check-certificate" https://raw.githubusercontent.…mulator/main/installer.sh -O - | /bin/sh

Detected OS: Enigma2

Downloading version 11936...

Installing...

error: pkg_init_from_file: Malformed package file /tmp/enigma2-plugin-softcams-oscam-emu-levi45_11936-803_all.ipk.

Installation completed successfully!

Please Restart GUI...

root@sf8008:~#

Display More

Witch image version and Witch box please thanks .

Compiled by Levi45

Oscam icam patch 11936 with emu r803 ipk/deb for all e2/sh4 boxes and image

same version but removed cccam reader patch for now till i find away to fix it.