Posts by phonix

I use dreamset editor its the best in my opinion

Yes im part of the Vix beta team (bassethound) as soon as more of the beta team get the Ultimo,s support and tutorials will start flowing

It still early days for the Ultimo im sure when more people get the box me included there will be more support and tutorials about

if you are a seasoned E2 linux box owner it should not be to hard to find your way round

It does not need a password as it self extracts

Latest Nod 32 does not show any virus on this file and Malwarebytes Anti-Malware shows nothing

Attached is my latest SpiderboxHD channel list for the 14th January 2012.

It has all the popular satellites from 68.5E to 61W.
The "FREESAT UK" FAV is very family friendly with sections for "FILMS" & "KIDS", "NEWS", "MUSIC", "INTERESTS" & "SHOPPING" for those who's families use the Spiderbox
Also there are separate satellites for feed, temporary and work in progress channels - Use these satellites for any experimenting you want to do before adding to your main satellites.

All Satellites, Transponders and Channels are in chronological order except for 28.2E.
28.2E has all its channels in genre blocks.
You can easily move the blocks into the order that you prefer in the Channel Editor.

All "FAV"s are populated with clearing channels including Ethernet, UCAS, Patched Via3 and past opening channels in case they return.
You can easily delete those you do not want/can not receive or add any of your own channels.

The "read me" in the archive gives information of all the extras that this channel list has and how to easily adapt the list to your needs.
Please read it as it has a lot of information on editing the list.

This is a full channel list - just remove the satellite/channels that you do not want.
TV Channels: 8297 (+2 Radio) of a maximum 9800
TPs: 1368 of a maximum 3500
FAVs: All 8 used - FREESAT UK, SPORTS, FILMS, KIDS/MUSIC, NEWS/FACTUAL, GENERAL, ENGLISH PL, ADULT,

The Channel List is for either USALS or DiSEqC setups - I use this list for both without any issues.

If using USALS make sure you check/input your Latitude & Longitude after loading.
If using DiSEqC switch to "Motor (DiSEqC 1.2)" in Motor Setup - Motor Type and if using one of my lists for the first time you will need to manually locate each satellite and then store in a unique position.
I have a sticky in "Spiderbox HD Information & Stickies" showing how to use the list for the first time for DiSEqC users.
The List has Satellites from 68.5E DiSEqC "SAT Position (POS=40)" through to 61W DiSEqC "SAT Position (POS=37)"
Any future channel lists of mine will have the same SAT Position numbers so DiSEqC users will not need to locate and store each sat position again.

The main updates from the last list are:
48E, 53E, 57E, 68.5E, 58W & 61W Satellites added to the main satellites.
All Satellite/TP/Channel changes since my last list dated 11/11/11.
All 1W TPs/Channels are now in 0.8W as "Ethernet" needs to see the satellites position as 00.8W.

The "ENGLISH PL" FAV contains any channels that show Premier League.
Most will never open with the standard Spiderbox but you may have other means to.

I do not have access to the "Ethernet" channels as my Spiderbox is well over 12 months old.
The FAVs contain these channels but are unchecked by myself but should work.

Happy Zapping

BillyBits

If you have added a new channel list to your openbox you have to rename FAV1/FAV2 and so on

if you use the list above FAV1 needs renaming to Entertainment FAV2 needs renaming to Movies and so on

08-01-2012

* The image base - qboxhd_update_SD_1.0.16_1578435
* Estonian version of the backup for Satellites *-Astra/Hotbird/Astra 1E/4A (4.8E)/Thor-*

--

* All things have been updated and
some things from Q.U.T. :=)

RaDaR 4.22 + SoftCam Panel
LT6.HD Mod by Diamondear (NEW 15/12/2011)
Language Italian Version v1.7.6 15/12/2011
Fix MyTubeService Version v0.1 20/09/2011
Last MediaCenter v0.1 Mod. by Diamondear 12/12/2011
BusyBox v1.19.3 (Stable) 06/09/2011
Picons for *** 22/11/2011 by Diamondear
Last Update Skin v2.0.41 Emu 15/10/2011
Webinterface v1.6.8 Mod. v0.1 Fix2 Porting by Diamondear
Fix for YouTube v0.1
Add script for Swap 128 MB
Sudoku Version 1.0.0
DVB Snoop Version 1.4.50
Add missing module Version 0.1
Weather Plugin Version 1.0.0
E2_LOADEPG 0.55.0/VAR
Meteo Italia
NTP Sync by QUT

************************************************************ ************************************************************ ******
added startup Logo made by Mariann Rea.
It's not just a photo- her photo won first place in the category of Man and Nature in Nature Photo competition in Estonia 2011
This photo has been published also in ESTONIAN NATURE YEARBOOK 2011
Photo has captured in the eight august 2010 by author Mariann Rea,
Powerful Thunder in the center of Tallinn.
This is going to be one of the officially available startup Logo for Estonian unofficial software for qboxhd.
I am glad that Mariann gave me her consent.

************************************************************ ************************************************************ ******

picon_default =Swallow= made by Mariann Rea.

https://rapidshare.com/#!download|783tl3|4103383402|Eight_in_January_2012_Estonian_unofficial_software_for_qboxhd.rar|56625|R~1FC73FEF69D5DCA0EC4B41D71FD2EA73|0|0

gracias al amigo zeros

Other people have tried disabling the auto cam start from the softcam manager and then re-enabling it again sorts it out too.

Have you added "ALLOW TELNETINFO=YES" to your config file?

best to do a restart after editing your config file

If its not working right you might as well try everything

Just tested on vix all working fine here on my static ip for the et9000

try clearing out your browser cash or another browser and restarting your router

Glad you like the new Vix image as lot of work has gone into it since Vix 2.2

Most people like the ability to adjust the the osd size and width as a lot of the newer tv,s can over scan to much and you can loose some of the tv picture and it only takes a few seconds to adjust so most user wont find this a big downer and only needs setting up once.

if you dont like the new Vix night skin (most feed back shows it really liked) you can change back to original skin of previous Vix images its now called Day HD skin and can be downloaded from the Vix online server its hidden in the Vix option.

ps make sure you do the online updates via the blue button/vix/software update to bring your box up to the latest vix build beer10

These have been tesed on linux 3.0

the PCTV Nano Stick 460e is working but does not clear most HD channels lol

Sundtek (Blue LED 1st gen) HD channels dont clear lol

Sundtek (Green LED 2nd gen) has issue with SR30000 channels

these wont drive a motor as far as i know

if you have not upgraded to the latest Vix 2.3 why? you are missing out a ton of stability fixes and improvements to many to mention but to get the above usb sticks working you need to be on linux kernel 3.1.1 for the Vu+ boxes

Is the tm500 the super model?

i only got the PCTV Nano Stick 290e to go with my Ultimo when it comes with 3 S2 tuners

there is a Sundtek S2 usb stick (Green LED which is 2nd gen) which is not fully working but there is a new model coming from Sundtek some time this month

There is a tool in tspanel to manually change the date and time

http://linuxsat-support.com/en…ou-need-your-image-3.html

I have been running the PCTV Nano Stick 290e on my et9000 running latest Vix image since christmas you need to use the em28xx-dvb drivers from the Vix feeds in drivers.

The usb stick has been running great not had any glitches or dropouts so far the SD picture quality is better than my old win n***-t HD is very good epg works as normal and subtitles are working fine cant get teletext working and zapping is not as quick as the fixed tuners but for just recording all the wives soaps it great

i managed to get a new one of ebay for £60 before crimbo

With this tool will get much data on the firmware of your Box
This tool can display contents of the Firmware image for S9 and S10

such as

Maincode
bootloader
Radioback
Upgcode
DefaultDB
UserDB
etc

and also able to take away the time bomb insde the img.

Just checked out the picons they look just like the ones Sandman from this forum made for the ultimo :haha:

http://linuxsat-support.com/pi…0-vfd-picons-sandman.html

Format USB memory stick FAT32.

Add the et6x00 folder to root of memory stick

Insert the USB medium into either USB sockets on the front or rear panel.
Now Power Off and Power On the box through the powerswitch at the rear panel of the box.

After Power On, ET6000 is detecting if there is ET6000 firmware available on the USB stick.
When the yellow/orange led shines then there is ET6000 firmware detected.
To load the ET6000 firmware you'll need to press the up button on the frontpanel.
When the green led will shine together with he yellow/orange led then the box is loading the firmware.
Please be patient because it will take couple of minutes to finish upgrading.
When the yellow/orange led will disappear then the box is finished upgrading the firmware.
The box will startup automatically after the upgrade is finished.

-Note-
During upgrading, please don't unplug power or shut down STB.
The frontpanel has 3 leds: RED, GREEN, YELLOW/ORANGE