Posts by phonix

Before starting the procedure below, ensure that the USB stick is formated FAT32 and has no other files on the stick!

Preparation
1) Download the 'et6000-bootloader-20111020' file in the ET6000 menu on this website.
2) Unzip the downloaded file then 'et5000' and 'et6000' folders will be appeared.
3) Copy those two folders into the USB Medium

Insert the USB medium into either USB sockets on the front or rear panel.
Power Off and Power On the box through the powerswitch at the rear panel of the box.

After Power On, ET6000 is detecting if there is ET6000 bootloader available on the USB medium.
When the yellow/orange led shines then there is ET6000 bootloader detected.
To load the ET6000 bootloader you'll need to press the up button on the frontpanel.
When the green led will shine together with he yellow/orange led then the box is loading the bootloader.
Please be patient because it will take couple of minutes to finish upgrading.
When the yellow/orange led will disappear then the box is finished upgrading the firmware.
The box will startup automatically after the upgrade is finished.

-Warning-
During upgrading, please don't unplug power or shut down STB.
Don’t power off within 5 seconds after upgrade is completed.
The frontpanel has 3 leds: RED, GREEN, YELLOW/ORANGE

-Important Note-
Don’t upgrade the Bootloader and Firmware at the same time.
Make sure that in the USB stick only needed files for either Bootloader or Image should be contained while processing for either Bootloader upgrade or Image upgrade.

Best place to find footy on sat is liveonsat but i cant see any thing for for newcastle united vs blackburn

http://liveonsat.com/forum.html

built in WiFi is a nice touch

but for the uk its a bit limited as you can only get the basic free to view channels on cable and some of the earlier Sunray SR4 3 triple tuners had Chinese terrestrial tuners and not uk/european standard ones

I have added the bootloader file duo_cfe_3_0_usb to the latest Vix image 25/12/2011

http://linuxsat-support.com/vu…-12-2011-a.html#post36344

after you have flashed your image there is a online update that brings you up to build 161

The vix images released on Christmas day updated the linux kernel to 3.1.1 which really should be a reflash and not a online update.

just update the bootloader first if you have not allready done it then a clean install of latest image and you should be good to go

make sure you backup all your settings first

29.12.2011 adjustments:

- Several bug fixes (nobody9)

(Tested this on latest Vix image on et9000 and web streaming is now working great SD ONLY using wmp
and watching recordings and files of the HDD)

http://linuxsat-support.com/at…v1.1_by_wilzonex_team.rar

Have you initialized and mounted your HDD correctly it should look like the image below

Updating the epg wont bring back the channels try rescanning the satellite as they have probably changed freq

and you might have to manually edit/add the channels in to your fav list after the scan

On my duo i have setup one cable for tuner A for a motorized dish and a second cable for tuner B to my sly fixed dish

This SatStation v 0.0.4 firmware has been built using the the latest CVS code and compiled from fresh.

Login Details
Username: root
Password: qboxhd

** Changelog **
================================================== ==============================
SatStation Release Beta v 0.0.4

* Enhancement: BusyBox Version 1.19.3
Replaced Older version of Busybox with a newer version

* Enhancement: SatStation Panel
Gives you detailed information about your QboxHD Mini. System and Network Tools

* Enhancement: New Boot Intro
Thanks to Mr Olympia

* Enhancement: CoolTV
*CoolTV EPG incorporated into image

*Enhancement : OpenWebif E2 --- Beta only --Not all functions work and work still in progress
* Use of an OpenSource WebIf <box ip address>:8088

*Fix : YouTube player fixed

Based on Duolabs beta release 0.0.60

* Bugfix: Some minor bugfixes.

Thanks to Jimux for assistance in putting this together
================================================== ==============================
Please ensure you are using the latest Bootloader otherwise all fixes may not work

Multiupload.com - upload your files to multiple file hosting sites!

A new vix image with the latest kernel 3.1.1 for Vu+ boxes will be out very soon sorry i cant give a date which will support a lot of usb stick natively

PCTV Nano Stick 290e tested and working on Uno on kernel 3.1.1

getting the full 3 tuner set up my self joint10

i have just order mine today and the ultimo is defiantly coming with 2x DVB-S2 tuners and a usb wifi stick

how-to install
unpack and ftp to your box changing old with new on /bin folder and reboot.

old version was 1.13.2 and had a number of memory leaks that are documented as fixed by version 1.19.0 and later that can create pixelation image.

Please make sure you do a full back of your image before updating this file in-case of problems/image corruption

zSHARE - busybox_1.19.3.zip - Free File Hosting Service | Audio and Video Sharing | Image Uploading | Web storage

================================================== ==========================

uboot 24.11.2010
================================================== ==========================
Release BETA 0.0.60

- Bugfix: Upgrade satellites.xml.
- Bugfix: Upgrade terrestrial.xml (added transponder for Estonia).
- Bugfix: Upgrade cables.xml (added transponder for Estonia).
- Bugfix: Added the Estonian language.
- Bugfix: The "TV Settings" menù is not displayed it when it is used the default skin.
- Bugfix: Some options of "TV Settings" menù (Just scale, Letterbox, ect.) are not applied when the decoder is restarted.
- Bugfix: Some minor bugfixes.

================================================== ===========================

what new ?
add oscam 6091 new config oscam
LT6SKIN v2.0.45

* oscam 6091 *
* radar 4.22 *
* radar sat sharing 4.22 *

UploadBox :: Downloading Roy Image BKP QBOXHDMINI 19.12.2011.zip

Just to add a note the fitting is right in the video that caz posted above but inside the duo the hard drive is located on the other side of the box

Eaglebox HD patch by Aquila 14/12/2011

N*S card support added - auto Boxxey
TNT card support added - auto AxS key

Vix is only up to release ViX-2.3.133 with all the on line updates downloaded and instaled

the vix team has released the makefile for vix 2.3 (openvix) so other people can build images from this but any one claiming to build a vix image any different from the version number above is not a image made/supported by the vix team and has not been vigorously beta tested by use so use at your own risk!

Before starting the procedure below, ensure that the USB stick is formated FAT32 and has no other files on the stick!

Preparation
1) Download the 'et6000-bootloader-20111020' file in the ET6000 menu on this website.
2) Unzip the downloaded file then 'et5000' and 'et6000' folders will be appeared.
3) Copy those two folders into the USB Medium

Insert the USB medium into either USB sockets on the front or rear panel.
Power Off and Power On the box through the powerswitch at the rear panel of the box.

After Power On, ET6000 is detecting if there is ET6000 bootloader available on the USB medium.
When the yellow/orange led shines then there is ET6000 bootloader detected.
To load the ET6000 bootloader you'll need to press the up button on the frontpanel.
When the green led will shine together with he yellow/orange led then the box is loading the bootloader.
Please be patient because it will take couple of minutes to finish upgrading.
When the yellow/orange led will disappear then the box is finished upgrading the firmware.
The box will startup automatically after the upgrade is finished.

-Warning-
During upgrading, please don't unplug power or shut down STB.
Don’t power off within 5 seconds after upgrade is completed.
The frontpanel has 3 leds: RED, GREEN, YELLOW/ORANGE

-Important Note-
Don’t upgrade the Bootloader and Firmware at the same time.
Make sure that in the USB stick only needed files for either Bootloader or Image should be contained while processing for either Bootloader upgrade or Image upgrade.