Anyone still having telekom full card ?
Or does anyone offering rsa key box key extraction services ? I can pay substantial amount of money
maybe is wrong ,i have one cline from
and is working good telekom romania ,ask him ,maybe is help
Posts by jhon32
-
-
-
Display More
Hello,
Yes, correct, this image is for DM800HDse (v1) boxes (Original or Clones), that were upgraded to Japhar Sim NC3.
Emo
Please add hungary languages
thanks
please post this request on Japhar support forum
Emohello this image is for dm800 hd se v1 NC3? Thank you
-
Please add hungary languages
thanks
please post this request on Japhar support forum
Emohello this image is for dm800 hd se v1 NC3? Thank you
-
why You just unpack ipk with 7zip and replace old binary with new one? Rename new binary and chmod 755.
Br
Hex
is desinstaled ,but script on etc / initd oscam script, not remove ,if whant install again must delete this script ant fuul reboot
-
Display MoreDisplay More
try this from
audi06_19
Hello dear friend, regarding this file that you left, because I tested it completely before, the problem I have with this file is that when I install it, later, if a new file comes OSCAM EMU I will do everything, delete the previous original file. Cannot install new file instead.
yes must delete manual from
usr / bin oscam
etc / tuxbox / config delete oscam folder
etc / initd oscam script
and full restart
Dear friend, but I have done all these things before and I have deleted the relevant files from these parts and with the following commands OSCAM EMU I deleted it, but still that original file still remains in the image. I do not know why this is so.
opkg list-installed | grep name
opkg list | grep name
opkg remove name
manual is better ,delete all file with oscam name what you instaled on this folder ,after make one full restart and install again ,try
usr / bin oscam
etc / tuxbox / config delete oscam folder
etc / initd oscam script
-
try this from
audi06_19
Hello dear friend, regarding this file that you left, because I tested it completely before, the problem I have with this file is that when I install it, later, if a new file comes OSCAM EMU I will do everything, delete the previous original file. Cannot install new file instead.
yes must delete manual from
usr / bin oscam
etc / tuxbox / config delete oscam folder
etc / initd oscam script
and full restart
-
try this from
audi06_19
-
Display More
Hello dear friends and managers, I have a problem, please help me.
in part Latest OscamEmu For ALL Images Mips Arm Sh4 IPK & DEB - DOWNLOAD ONLY NO CHAT Files OSCAM EMU by a dear friend MOHAMED_OS I put everything I did, it will not be installed on Dreambox 7020, which has an image OpenPLi 7 (HomeBuild 2018.11.25) And these files are installed only when I first install the file libcurl4 on the image. To install libcurl4 I must first install the file libssl ... After installing these two files, it is possible to install the files OSCAM EMU by MOHAMED_OS Dear puts in the section provided. But the important point here is that the file that enigma1969 dear for OSCAM EMU 11691 In the contract section without the need for two files libcurl4 And libssl ... easily installed on my image. Now, where do you think the problem comes from? Is the file better OSCAM EMU Without installing two files libcurl4 And libssl ... to install the drive or not, it is better to install each file .... in the image of two files. . .. and ... to install in the image. Thank you for your help.
Display MoreSorry,
install oscam versions without these libraries: libcurl4, libssl and libpng.....;
because MOHAMED_OS Mix everything ,he takes source code from NCam " fairbird " and integrate it to oscam without making any explanations....;
if you want to understand why the guys use these libraries take a look here:
Ncam Emu compiled and patched by READ
&&
https://github.com/fairbird/NCam
&&
there are more things to explane but i m tired to continue.......!!!
;
Hello dear managers and friends, according to my question above and the answer to that samur Dear, they gave it. Now, please help me from which part of the site I can find the best file OSCAM EMU Download it now or in the future and install it on my Dreambox 7020HD with the image OpenPLi 7 (HomeBuild 2018.11.25) on it. Thank you for your help.
-
oswcam 11690 have problems with FBC TUNER ,11691 From Audi_1969 works perfect
-
Display More
WTF ?!
I've written in several consecutive posts that the firmware is probably irreversibly damaged, as I've also written that I don't have this problem.
Also I've written ... that the firmware doesn't belong to me. I'm not an interviewer. I did not write the initial question. You don't have to show me anything to try :). And I repeat once again the sentence you quoted but did not read:
Quote... I don't have a full-fledged Linux ...
OK! CASE CLOSE!
-
Display More
I dont know, sorry :).
I have tried to open this firmware twice already - first in a set-top-box under a depleted Linux, with the help of "fsck.cramfs" tool and then simply using a "7-zip" archiver under Windows OS.
But I haven't tried the third method, which I also mention above, because I don't have a full-fledged Linux - the necessary "binwalk" tool:
ok ,if you have time try:
unpack & repack dreambox image on ubuntu,
put one good boot loader and install again on dm500
-
Display More
As I wrote, it will probably not be possible.
Although I don't know this compressed file-system (CramFS) from Linux, the file information, in this short "cut out" firmware, is probably just a reference to the location of the disk where the data is to be stored. However, part of the firmware (disk) with the stored data of these files is probably missing - it is not the complete firmware that is backed up, but only a short part of it.
So it probably won't be possible.
But maybe I'm wrong. I don't know CramFS well, as I wrote.
if you qwent desamble on linux image ,put one good loader dm500s and after install on one dm500s ,is a lot work,maybe?
-
Is this supposed to be able to decode two channels at once ? One works fine, but as soon as I try to start a second channel they both freez until one of them drops, I'm not sure why
try setings cache on oscam
-
more easy if this image can put in a dm 500 s to get data from files
if somebody have a dm500 box
not work ! i install on dm500s and is corupt ,maybe with linux masine ,decompress file and see config oscam
-
Display More
#
Hello hecha71.
I was, yesterday and today, in an "install + uninstall + reinstall" of several OE2.5 images, for the DM920UHD4K.
Merlin4 + PeterPan + Newnigma2 + DreamElite.
With all Images, the same error. Weird.
It couldn't be. So I started doing screenings, looking for the error. And I found out.
It is in the Skin Plugin "HDGlass17".
After installing this Plugin and configuring it, the error appeared.
I entered the Plugin, did the "reset" to the configuration, and the error disappeared.
Thanks for the tips and help.
Hug.
#
try first restore online from dreamelitte ,after install dreamelitte 7.1 and not install any skin
-
Display More
hi!
I have bought a dreambox and I want to use it with a smartcard I have legally purchased, nothing illegal.
I loaded the smartcard inside the (only) cardslot of the dreambox and made some modifications in config files /etc/tuxbox/config/oscam/
But I have black screen
1- here is my config oscam.conf
2- and log from start of oscam process to the begining of my errors: startlog.txt
Would someone help me please? I know Master G can
Thanks a lot.Attachments: oscam.conf and startlog.txt
I THINK IS PROBLEMS WITH DATE ON OSCAM ,what version you use?and what image you use?
expiry date: 1991/01/01
-
Ah, I see. I'm using this oscam-emu image right now, guess there isn't a pre-made oscam surprise version.
I'll look into making my own tomorrow to test it out, thanks
need same stuff for work ,better is openatv6.4-6.3
-
This is not my backup, it's the joan789 's backup.
;-)
yes ,is pasword protect ,if is in rusian language ,what pasword have?
in english,not russian and the password is default, root / dreambox
ok try open with notepad+++ and see a lot null ,when i change in cirilic ,character is clear,
try Peazip and ask for pasword ,put your pasword and maybe is open,is corupt image/backup
-
Display More
dear sir!
wish someone can find the BoxID in oscam config in the attachment of dm500s' backup.img with dreamup.this dm500 is broken so i can't boot
to get the BoxID,i need it to read card in other dreambox.I can open this image in ultraEdit but don't konw how to get what i
if you have changed pasword on dreambox ,put hire!
