Hello
Solved..!!
I installed another image..
I used web interface.
First I flashed "sim201_ssl84b" boothloader since my was 82.
After that I installed "TSimage-dm800-20120228_sim201#ssl84b"
And then I was able to put in the right configuration in my tuner setup..
Reberg
Hello
I finally managed to fix the ca not found error after several hours.
and I have installed dream elite 1.33d V3 sim 2.01 image.
When I try to set up tuner configuration it says "tunerA" nothing.
I have tried 2 different tuners, both from Dm800 clones.
Is this a software issue or is both tuners defect??
Reberg
DM8000PVR VU+duo and DM800 clone
Installing all the files went fine now when i try to run i get
'error while trying to load shared binaries: libgdk-pixbuf.so.2'
this is driving me mad lol help!
I still get this message, have tried to install all the packages several times, but i dont come any longer.
reberg
Thanx
I tried that, but with no success.
And I did the hole tutorial again, and then it went well..
thank u again.
Reberg
Hello
I have followed this tutorial. http://linuxsat-support.com/li…ested-working-debian.html
And when I come to this line.
hown root:root /usr/local/bin/noip2
I get this message
cardserver@Server:~/noip-2.1.9-1$ hown root:root /usr/local/bin/noip2
No command 'hown' found, did you mean:
Command 'chown' from package 'coreutils' (main)
hown: command not found
reberg
Hello
Solved
I had to set to group 1 in oscam.server.
reberg
Hello
I have no managed to connect my dm8000 to an ubuntu server. But I get this message " SID list will not be send to mgcamd client. "
oscam.log
2012/09/22 16:39:36 99B54F0 r canal_digital [conax] ready for requests
2012/09/22 16:43:44 99BFA40 c WARNING: invalid client
2012/09/22 16:43:44 99BFA40 c DM8000 disconnected from 192.168.0.130
/09/22 16:23:37 8F65290 c client connected to 50001 port
2012/09/22 16:23:37 8F65290 c encrypted newcamd:50001-client 192.168.0.130 granted (DM8000, au=off)
2012/09/22 16:23:37 8F65290 c user DM8000 authenticated successfully (mgcamd)
2012/09/22 16:23:37 8F65290 c AU disabled for user DM8000
2012/09/22 16:23:38 8F65290 c SID list will not be send to mgcamd client.
oscam.server
# Smargo (mousemode)
# Set enable to 1 if connected to the box, 0 if not used
#--------------------------------------------------------
[reader]
label = canal_digital
protocol = phoenix
device=/dev/ttyS0
enable = 1
group = 1
emmcache = 1,3,2
caid = 0B00
ident = 0B00:000000
#boxid = 00000000
reberg
Hello
Solved.
I had made an newbie mistake.. I used the wrong serial port.
It working now..
Thanx
Reberg
hello
This is all i se about console.
Console: switching to colour frame buffer device 180x56.
I ahv also folowed "Setting up the Infinity USB Phoenix reader."
from putty
cardserver@Server:/var/nftytool$ sudo ./nftytool -p phoenix -- -p phoenix -f 3.58 -e
Infinity USB 1.06
cardserver@Server:/var/nftytool$
reberg
Hello
I am trying to set up an linux caardserver with oscam as server and waant to connect with mgcamd as clients.
i have installed a infinity usb card reader from wb electronics. its an usb/serial reader
Its in phoenix mode.
When i start oscam ive get this message in telnet.
cardserver@Server:~$ tail -f /var/log/oscam.log
2012/09/21 17:24:48 0 s starting thread check
2012/09/21 17:24:48 0 s check thread started
2012/09/21 17:24:48 0 s canal_digital [mouse] creating thread for device /dev/ttyUSB0
2012/09/21 17:24:48 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/09/21 17:24:48 0 s anti cascading disabled
2012/09/21 17:24:48 873CB18 c plain dvbapi-client granted (linuxsatsupport, au=off)
2012/09/21 17:24:48 B6C00870 h HTTP Server listening on port 8080
2012/09/21 17:24:48 873CB18 c dvbapi: 2 entries read from oscam.dvbapi
2012/09/21 17:24:48 873CB18 c dvbapi: could not detect api version
2012/09/21 17:24:50 873B2C8 r canal_digital [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/09/21 17:24:51 873B2C8 r canal_digital [mouse] card detected
2012/09/21 17:25:01 873B2C8 r canal_digital [mouse] Error activating card.
2012/09/21 17:25:23 0 --- Skipped 2 duplicated log lines ---
2012/09/21 17:25:23 873B2C8 r canal_digital [mouse] card initializing error
Here is my oscam.server.
# Smargo (mousemode)
# Set enable to 1 if connected to the box, 0 if not used
#--------------------------------------------------------
[reader]
label = canal_digital
protocol = mouse
device = /dev/ttyUSB0
enable = 1
group = 1
emmcache = 1,3,2
#caid = 0B00:000000
#boxid = 00000000
Reberg
Ok, than u.
I hav also a vu+ an d i use the newest black hole image there.
reberg
hi
I Used the "Dreambox NO CA FOUND Repair Tool SIM2/01 EDition"
this do the trick, I hav now contact with the box again. Thank u very much..
This is on tha sida of the topic, but can u recomend a image for my box?
reberg
hi
Its no light in the display, so i cant connect with it
and its not connecting to dreamup
reberg
Hi
I have flashed my dm800 clone with a new image, but after the installation it wont start up again.
I`s dark in the display, but its light int the back at the ethernet.
It`s there anything to with it??
I cant connect with dreamup either
Reberg
Thanx for all help, no its working great on the lan as as the wan
Reberg
but it will chose the other card if i not subscribe the channel on my local card?
do i have to set priority when i connect to a card from the same provider on lan and wan?
and another one...!
Is there a package like the oscam-mgcamd138 for peter pan image on the dream box?
so i can use it both as server and client?
reberg
Thank U.
No I`s working.
I innstalled the oscam-mgcamd138 ipkg, and put inn all youre configs and viola!! I can se from both cards..
Annother question before i stop asking U :)
can i add a connect mgcamd to another server as well? its the same provider, but we have different channels::!
reberg
thanx.. is mgcamd 1.38 in this?
it wasent in the ts panel i downloaded in open poi
reberg
