Posts by reberg

reberg · Sep 9th 2012

hello again

I decided to start all over, and install blach hole1.7.7 rev B .

Do I need to install tspanel manually, since iam not able to find it anywer in the download on the box?

reberg

reberg · Sep 9th 2012

Quote from master G

You can try installing mgcamd 1.38 from the plugins feed on your image or TSPanel.

Did you change the boxtype to dreambox in mg_cfg or is it still autodetect ?

Start mgcamd from softcam manager instead of using telnet, in Menu -> Setup -> SoftCam / CI

hei

I cant find mgcamd 1.38 either on the tspanel or in the plugins feed. I try to find a download package and install it manually

Reberg

reberg · Sep 8th 2012

Hi

I will try that tomorrow, I have to take the old crow out for dancing tonight :)

Have a good night

reberg

reberg · Sep 8th 2012

the latest openpli with 1.35a mgcamd

reberg · Sep 8th 2012

hi

still got this message

got 130 cmd 9F
/dev/dvb/card0/demux0 error 2: No such file or directory

reberg · Sep 8th 2012

I am noy sure what u mean about decoding :)

when i started i got to se the channes on the viasat card, but never on the canal digital. but now i cant se anything

can u make an account for dvbapi?

reberg · Sep 8th 2012

2012/09/08 14:23:54 2CD474B0 c dvbapi: Start descrambling PID #1 (CAID: 093E) 1
2012/09/08 14:24:01 2CD474B0 c anonymous (093E&000000/0456/88:D0AE): found (268 ms) by viasat (of 1 avail 1)
2012/09/08 14:24:11 2CD474B0 c anonymous (093E&000000/0456/88:C1BB): found (268 ms) by viasat (of 1 avail 1)
2012/09/08 14:24:12 2D5474B0 c client connected to 50000 port
2012/09/08 14:24:12 2DD474B0 c client connected to 50001 port
2012/09/08 14:24:13 2D5474B0 c encrypted newcamd:50000-client 192.168.0.128 granted (bedroom1, au=viasat)
2012/09/08 14:24:13 2D5474B0 c user bedroom1 authenticated successfully (mgcamd)
2012/09/08 14:24:13 2D5474B0 c AU enabled for user bedroom1 on reader viasat
2012/09/08 14:24:13 2DD474B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom, au(auto)=0)
2012/09/08 14:24:13 2DD474B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 14:24:13 2DD474B0 c AU disabled for user bedroom
2012/09/08 14:24:14 2D5474B0 c Connection closed to client
2012/09/08 14:24:14 2DD474B0 c Connection closed to client
2012/09/08 14:24:14 2D5474B0 c bedroom1 disconnected from 192.168.0.128
2012/09/08 14:24:14 2DD474B0 c bedroom disconnected from 192.168.0.128
2012/09/08 14:24:14 2DD474B0 c thread 2DD474B0 ended!
2012/09/08 14:24:14 2D5474B0 c thread 2D5474B0 ended!
2012/09/08 14:24:21 2CD474B0 c anonymous (093E&000000/0456/88:02FB): found (270 ms) by viasat (of 1 avail 1)
2012/09/08 14:24:31 2CD474B0 c anonymous (093E&000000/0456/88:1256): found (267 ms) by viasat (of 1 avail 1)
2012/09/08 14:24:41 2CD474B0 c anonymous (093E&000000/0456/88:6AD2): found (268 ms) by viasat (of 1 avail 1)
2012/09/08 14:24:51 2CD474B0 c anonymous (093E&000000/0456/88:C472): found (267 ms) by viasat (of 1 avail 1)

reberg · Sep 8th 2012

I am not sure what dvbapi does??

reberg · Sep 8th 2012

nothing (:

2012/09/08 14:03:41 2CD474B0 c anonymous (093E&000000/0456/88:701A): found (268 ms) by viasat (of 1 avail 1)
2012/09/08 14:03:44 2DEFF4B0 c client connected to 50000 port
2012/09/08 14:03:44 2D6FF4B0 c client connected to 50001 port
2012/09/08 14:03:44 2DEFF4B0 c encrypted newcamd:50000-client 192.168.0.128 granted (bedroom1, au=viasat)
2012/09/08 14:03:44 2DEFF4B0 c user bedroom1 authenticated successfully (mgcamd)
2012/09/08 14:03:44 2DEFF4B0 c AU enabled for user bedroom1 on reader viasat
2012/09/08 14:03:44 2D6FF4B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom, au(auto)=0)
2012/09/08 14:03:44 2D6FF4B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 14:03:44 2D6FF4B0 c AU disabled for user bedroom
2012/09/08 14:03:51 2CD474B0 c anonymous (093E&000000/0456/88:3BFC): found (277 ms) by viasat (of 1 avail 1)
2012/09/08 14:04:01 2CD474B0 c anonymous (093E&000000/0456/88:F833): found (267 ms) by viasat (of 1 avail 1)
2012/09/08 14:04:05 2DEFF4B0 c Connection closed to client
2012/09/08 14:04:05 2D6FF4B0 c Connection closed to client
2012/09/08 14:04:05 2DEFF4B0 c bedroom1 disconnected from 192.168.0.128
2012/09/08 14:04:05 2D6FF4B0 c bedroom disconnected from 192.168.0.128
2012/09/08 14:04:05 2DEFF4B0 c thread 2DEFF4B0 ended!
2012/09/08 14:04:05 2D6FF4B0 c thread 2D6FF4B0 ended!

I also get this when I start mgcamd in telnet

[newcamd] 192.168.0.142:50001 new card: 0B00 000000.
[newcamd] 192.168.0.142:50000 new card: 093E 000000.
got 130 cmd 9F
/dev/dvb/card0/demux0 error 2: No such file or directory

By the way.. thank u so far

reberg

reberg · Sep 8th 2012

hi

latest log

2012/09/08 13:04:52 2DD474B0 c client connected to 50000 port
2012/09/08 13:04:52 2D5474B0 c client connected to 50001 port
2012/09/08 13:04:52 2DD474B0 c encrypted newcamd:50000-client 192.168.0.128 granted (bedroom, au=viasat)
2012/09/08 13:04:52 2DD474B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 13:04:52 2DD474B0 c AU enabled for user bedroom on reader viasat
2012/09/08 13:04:52 2D5474B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom1, au(auto)=0)
2012/09/08 13:04:52 2D5474B0 c user bedroom1 authenticated successfully (mgcamd)
2012/09/08 13:04:52 2D5474B0 c AU disabled for user bedroom1
2012/09/08 13:04:53 2DD474B0 c Connection closed to client
2012/09/08 13:04:53 2DD474B0 c bedroom disconnected from 192.168.0.128
2012/09/08 13:04:53 2DD474B0 c thread 2DD474B0 ended!
2012/09/08 13:04:53 2D5474B0 c Connection closed to client
2012/09/08 13:04:53 2D5474B0 c bedroom1 disconnected from 192.168.0.128
2012/09/08 13:04:53 2D5474B0 c thread 2D5474B0 ended!
2012/09/08 13:04:55 2CD474B0 c anonymous (0B00&000000/05E4/8D:0B9F): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 13:05:05 2CD474B0 c anonymous (0B00&000000/05E4/8D:5076): found (226 ms) by canal_digital (of 1 avail 1)

reberg · Sep 8th 2012

here is my oscam.user now

[account]
user = bedroom
pwd = vu+duo
group = 1
uniq = 1
monlevel = 3
au = Viasat
caid =
cccmaxhops = -1
cccreshare = -10

[account]
user = bedroom1
pwd = vu+duo1
group = 2
uniq = 1
monlevel = 3
au = Canal Digital
caid = 0B00
ident = 0B00:000000
cccmaxhops = -1
cccreshare = -10

oscam.server

# Internal reader lower (or if the box has only one reader)
#----------------------------------------------------------
[reader]
Label = Viasat
Protocol = internal
Detect = CD
Device = /dev/sci0
EMMCache = 1,3,2
Group = 1
Fallback = 0
CAID = 093E
ident = 093E:000000
BoxID = xxxxxxxx

# Internal reader upper (boxes with two readers)
#-----------------------------------------------
[reader]
label = Canal Digital
protocol = internal
detect = cd
device = /dev/sci1
enable = 1
group = 2
CAID = 0B00
ident = 0B00:000000
emmcache = 1,3,2
#boxid = 00000000

# Smargo (mousemode)
# Set enable to 1 if connected to the box, 0 if not used
#--------------------------------------------------------
[reader]
label = smargo
protocol = mouse
device = /dev/ttyUSB0
enable = 0
group = 1
emmcache = 1,3,2
#boxid = 00000000

latest log

2012/09/08 13:04:52 2DD474B0 c client connected to 50000 port
2012/09/08 13:04:52 2D5474B0 c client connected to 50001 port
2012/09/08 13:04:52 2DD474B0 c encrypted newcamd:50000-client 192.168.0.128 granted (bedroom, au=viasat)
2012/09/08 13:04:52 2DD474B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 13:04:52 2DD474B0 c AU enabled for user bedroom on reader viasat
2012/09/08 13:04:52 2D5474B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom1, au(auto)=0)
2012/09/08 13:04:52 2D5474B0 c user bedroom1 authenticated successfully (mgcamd)
2012/09/08 13:04:52 2D5474B0 c AU disabled for user bedroom1
2012/09/08 13:04:53 2DD474B0 c Connection closed to client
2012/09/08 13:04:53 2DD474B0 c bedroom disconnected from 192.168.0.128
2012/09/08 13:04:53 2DD474B0 c thread 2DD474B0 ended!
2012/09/08 13:04:53 2D5474B0 c Connection closed to client
2012/09/08 13:04:53 2D5474B0 c bedroom1 disconnected from 192.168.0.128
2012/09/08 13:04:53 2D5474B0 c thread 2D5474B0 ended!
2012/09/08 13:04:55 2CD474B0 c anonymous (0B00&000000/05E4/8D:0B9F): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 13:05:05 2CD474B0 c anonymous (0B00&000000/05E4/8D:5076): found (226 ms) by canal_digital (of 1 avail 1)

reberg · Sep 8th 2012

Hi

here is the log

nothing works now :)

2012/09/08 12:50:13 2DD474B0 c client connected to 50000 port
2012/09/08 12:50:13 2D5474B0 c client connected to 50001 port
2012/09/08 12:50:14 2DD474B0 c user bedroom is providing a wrong password (mgcamd)
2012/09/08 12:50:14 2DD474B0 c user bedroom is trying to connect but doesnt exist ! (mgcamd)
2012/09/08 12:50:14 2D5474B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom, au=viasat)
2012/09/08 12:50:14 2DD474B0 c plain newcamd-client 192.168.0.128 rejected (no such user)
2012/09/08 12:50:14 2D5474B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 12:50:14 2D5474B0 c AU wont be used on this port -> disable AU
2012/09/08 12:50:14 2DD474B0 c thread 2DD474B0 ended!
2012/09/08 12:50:14 2D5474B0 c Connection closed to client
2012/09/08 12:50:14 2D5474B0 c bedroom disconnected from 192.168.0.128
2012/09/08 12:50:14 2D5474B0 c thread 2D5474B0 ended!
2012/09/08 12:50:15 2CD474B0 c anonymous (0B00&000000/05E4/8D:E67C): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:50:25 2CD474B0 c anonymous (0B00&000000/05E4/8D:ABB5): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:50:34 2CD474B0 c anonymous (0B00&000000/05E4/8D:DDF0): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:50:44 2CD474B0 c anonymous (0B00&000000/05E4/8D:D1A3): found (226 ms) by canal_digital (of 1 avail 1)

reberg · Sep 8th 2012

Hi

2012/09/08 12:16:04 2CD474B0 c anonymous (0B00&000000/05E4/8D:2CDF): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:14 2CD474B0 c anonymous (0B00&000000/05E4/8D:8526): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:24 2CD474B0 c anonymous (0B00&000000/05E4/8D:6F46): found (228 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:35 2CD474B0 c anonymous (0B00&000000/05E4/8D:8289): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:45 2CD474B0 c anonymous (0B00&000000/05E4/8D:89A4): found (225 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:16:55 2CD474B0 c anonymous (0B00&000000/05E4/8D:679A): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:05 2CD474B0 c anonymous (0B00&000000/05E4/8D:2F5D): found (225 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:15 2CD474B0 c anonymous (0B00&000000/05E4/8D:29FF): found (226 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:24 2E6FF4B0 c client connected to 50000 port
2012/09/08 12:17:24 2EEFF4B0 c client connected to 50001 port
2012/09/08 12:17:24 2E6FF4B0 c client(2E6FF4B0) duplicate user 'bedroom' from 192.168.0.128 set to fake (uniq=1)
2012/09/08 12:17:24 2E6FF4B0 c encrypted newcamd:50000-client 192.168.0.128 granted (bedroom, au(auto)=viasat)
2012/09/08 12:17:24 2E6FF4B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 12:17:24 2E6FF4B0 c AU enabled for user bedroom on reader viasat
2012/09/08 12:17:24 2EEFF4B0 c client(2EEFF4B0) duplicate user 'bedroom' from 192.168.0.128 set to fake (uniq=1)
2012/09/08 12:17:24 2EEFF4B0 c encrypted newcamd:50001-client 192.168.0.128 granted (bedroom, au(auto)=canal_digital)
2012/09/08 12:17:24 2EEFF4B0 c user bedroom authenticated successfully (mgcamd)
2012/09/08 12:17:24 2EEFF4B0 c AU enabled for user bedroom on reader canal_digital
2012/09/08 12:17:25 2EEFF4B0 c Connection closed to client
2012/09/08 12:17:25 2EEFF4B0 c bedroom disconnected from 192.168.0.128
2012/09/08 12:17:25 2E6FF4B0 c Connection closed to client
2012/09/08 12:17:25 2EEFF4B0 c thread 2EEFF4B0 ended!
2012/09/08 12:17:25 2E6FF4B0 c bedroom disconnected from 192.168.0.128
2012/09/08 12:17:25 2E6FF4B0 c thread 2E6FF4B0 ended!
2012/09/08 12:17:25 2CD474B0 c anonymous (0B00&000000/05E4/8D:DCAA): found (227 ms) by canal_digital (of 1 avail 1)
2012/09/08 12:17:35 2CD474B0 c anonymous (0B00&000000/05E4/8D:148D): found (235 ms) by canal_digital (of 1 avail 1)

reberg · Sep 8th 2012

Quote from master G

In oscam.conf activate mgclient and keep alive.

Code

[newcamd] 
port = 50000@093E:000000;50001@0B00:000000
key = 0102030405060708091011121314
allowed = 
keepalive =[COLOR='#FF0000'] 1[/COLOR]
mgclient =[COLOR='#FF0000'] 1[/COLOR]

You may also need to change the box type in mg_cfg to dreambox B: { 02 }.

Code

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
[COLOR='#FF0000']B: { 02 }[/COLOR]

Both readers are in the same group, change the smargo to group = 2.

Code

[reader]
label    = Canal Digital
protocol = internal
detect = cd
device   = /dev/sci1
enable   = 1
group    = 1
CAID = 0B00
ident = 0B00:000000
emmcache = 1,3,2
#boxid    = 00000000




# Smargo (mousemode)
#  Set enable to 1 if connected to the box, 0 if not used
#--------------------------------------------------------
[reader]
label    = smargo
protocol = mouse
device   = /dev/ttyUSB0
enable   = 0
group    = [COLOR='#FF0000']2[/COLOR]
emmcache = 1,3,2
#boxid    = 00000000

Display More

I would also give each card its own [account] in oscam.user, with separate user, pass and group.

Post any errors from your oscam log.

Display More

Hi

the smargo reader is not in use, but i can change group on the upper reader to 2?

Reberg

reberg · Sep 8th 2012

Hi
DM8000

Code

oscam.server
[reader]
Label = Viasat
Protocol = internal
Detect = CD
Device = /dev/sci0
EMMCache = 1,3,2
Group = 1
Fallback = 0
CAID = 093E
ident = 093E:000000
BoxID = xxxxxxxx




# Internal reader upper (boxes with two readers)
#-----------------------------------------------
[reader]
label    = Canal Digital
protocol = internal
detect = cd
device   = /dev/sci1
enable   = 1
group    = 1
CAID = 0B00
ident = 0B00:000000
emmcache = 1,3,2
#boxid    = 00000000




# Smargo (mousemode)
#  Set enable to 1 if connected to the box, 0 if not used
#--------------------------------------------------------
[reader]
label    = smargo
protocol = mouse
device   = /dev/ttyUSB0
enable   = 0
group    = 1
emmcache = 1,3,2
#boxid    = 00000000




oscam.conf




[global]
nice             = -1
waitforcards     = 0
preferlocalcards = 1
saveinithistory  = 1
logfile = /tmp/oscam.log 
nice = -1 
preferlocalcards = 1 
saveinithistory = 1 
resolvegethostbyname = 1 




# logging 
#pidfile = /var/run/oscam.pid 
logfile = /var/log/oscam.log 
usrfile = /var/log/oscamuser.log 
cwlogdir = /var/log/cw.log 
maxlogsize = 1000 




[monitor] 
port = 0 
nocrypt = 
aulow = 30 
hideclient_to = 15 
monlevel = 3 
appendchaninfo = 0 




[newcamd] 
port = 50000@093E:000000;50001@0B00:000000
key = 0102030405060708091011121314
allowed = 
keepalive = 0 
mgclient = 0




# web interface
#--------------
[webif]
httpport     = 8080
httpuser     = oscam
httppwd      = 
httpallowed  = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255
httprefresh  = 10




# protocols
#----------
[dvbapi]
enabled = 1
au      = 1
boxtype = dreambox
user    = oscam







oscam.user




[account]
user                          = bedroom
pwd                           = vu+duo
group                         = 1,2
uniq                          = 1
monlevel                      = 3
au                            = 1
caid                          =
cccmaxhops                    = -1
cccreshare                    = -10

Display More

on VU+duo

Code

newcamd.list




CWS_KEEPALIVE = 300 
CWS_INCOMING_PORT = 21000 
CWS= 192.168.0.142 50000 bedroom vu+duo 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan oscam2 
CWS= 192.168.0.142 50001 bedroom vu+duo 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan oscam2

mg_cfg

Code

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }




# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }




# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 01 }




# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0




# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }




# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 01 }




# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30




# network ecm timeout in seconds
K: { 05 }




# newcamd dead routes connect retry, sec
Q: { 600 }




# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }




# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password




# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80




# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log




# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }




# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }




# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }




# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }




# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }

Display More

reberg · Sep 8th 2012

Hi

I have a VU+ duo and I want it to connect to a dm8000.

I use oscam on the dreambox and mgcamd on the vu+duo.

I have to cards viasat and canal digital.

both cards connects to the server, but I only the viasat card decodes.

Can anyone help me.

eberg

Posts by reberg

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw

my card connects but get no cw