You need to enable no zap before streaming/multi-tuner in settings
Posts by Pog22
-
-
Yes, it's been fixed in all the newer Enigma images, you'll need to flash and configure again (or get someone to do it), you will lose all settings as it will wipe the box. There are some nice pre-configured images with all the plugins installed, I recommend Champions, lovely snappy image
-
Do not get a third homeplug, homeplugs work like old network hubs not like modern day network switches, network hubs are obsolete as they drastically slow your whole network the more devices you connect
-
Champion, I've tweaked your image and installed it in a few boxes but one box in particular has a problem with tuning terrestrial, on Irish Saorview it will only pull in one mux or the other, never both. Was there ever a fix? I think the problem lies with the fact that this box was not scanned for terrestrial before I ran the software update, any that were scanned then updated seem to work fine. I've tried copying over the terrestrial.xml and lamedb from a working box but it's not working, think I'll need to re-flash.
I'm sitebanned from Boards so won't be asking there
-
Trying to install enigma 2 via spark enigma 2 upgrade plugin.But when i press red button for enigma 2 update a message pops up saying can not find kernel file upgrade failed.Any help much appreciated
If the plugin isn't seeing the kernel you have the plugin looking in root for the files, change the path to inside the enigma2 folder and select by pressing red, then press red to upgrade
-
Pog22 - What country Terrestrial are you trying to scan ? Maybe another user can then advise you.
Irish Saorview, it seems the tuner is not working at all. Tried all the usual tricks, scanning the exact frequency with bandwidth set to 8mhz, setting it to Italy etc. I'm back on Hyperion as this is a show stopper.
-
Tried this image champion and although it's nice and snappy I had a few issues.
I use SPDIF and had to replace the audio.elf to fix sound dropouts and delays.
I cannot tune terrestrial channels in this image, even by frequency, no matter what I try. Can tune them in every other image with bandwidth set to 8mhz.
Also, the keymap is messed up, there is no button mapped to +24hrs in CrossEPG (major showstopper with the missis). -
Yes, PKT Hyperion and others now have the fix. Menu->PKTBluepanel->actualisations->firmware->download, the box will reboot a few times. If you are on another firmware you will have to flash fresh. Try championcs backup, running lovely for me (and can get updates which is a big bonus) http://linuxsat-support.com/showthread.php?t=37180
-
If only I could change my vote, HDMU was the best at the time but PKT Hyperion V2 is now the best image, it's rock solid with no judder and you can update it in the bluepanel without re-flashing, I now have a 100% stable box with everything working. Winner by a mile!!!!
-
looks like its got to be the new openpli hybrid no contest seeing as its the only one that fixes the judder problem as of now, can confirm this running for 2 days and not had any judder
Just because it's the first image with the fix, expect other images to have it very soon. I didn't like Hybrid, the plugins menu is broken, you cannot download plugins by pressing green.
-
I have PKT Enigma2 Hyperion running lovely on my box but I cannot get the usb key working. When I click record it says hdd not initialised. I've telneted into the box and did mkfs.ext3 -L RECORD /dev/sda1, it goes through the motions as if it's formating it ok, but it does not work and still shows as fat32 when i fdisk
spark:~# fdisk -l
Disk /dev/sda: 4048 MB, 4048551936 bytes
54 heads, 9 sectors/track, 16270 cylinders
Units = cylinders of 486 * 512 = 248832 bytesDevice Boot Start End Blocks Id System
/dev/sda1 5 16271 3952640 b Win95 FAT32 -
I just installed HDMU_11097 and Web interface crashes every time I try to stream a second channel to my laptop. This does not happen on earlier versions. I've reinstalled and get the same thing, it's a bug. I've attached a crashlog.
-
This is just comical that you have to do a modification like this to what is apparently supposed to be an Enigma 2 box. This box gets more comical every day
Nano, give up with your trolling. If you don't like the box just stay out of the discussions as you offer nothing to them.
OP, you can change all eps values to 45 in /etc/lircd.conf. Mine is much more responsive now
-
Why do you guys think is wise to use E2 when Sti chipsets dont run E2 images properly?
How do the images run on your stb's? Im thinking to buy this receiver but im not 100% persuaded.It was buggy a few months ago, but HDMU is rock solid now, recording multiple sources, timeshift, streaming, everything works 100%. You obviously haven't got one
-
There is a Spark plugin in this pack that does it in flashable e2jffs2.img and uimage enigma image files. Read the readme to install it in Spark, reboot and then you will have the option to install or backup Enigma2 when you run it.
https://dl.dropbox.com/u/56355/2012.07.12-plugin.rar -
Has the auto volume option been removed from the 10780 image? I can't see it in the Setup-->System menu?
I found it, it's now a plugin that I needed to download. I'm not as happy with it as I was on the older image, DTS seems to be a much lower volume. I'm noticing much bigger differences in levels between DTS/AC3 and Mpeg. I'm trying to adjust it, but am not finding a balance I'm happy with.
-
Has the auto volume option been removed from the 10780 image? I can't see it in the Setup-->System menu?
-
Are you running Enigma 2? You need to configure your web interface and set the port in menu-->plugins-->webinterface. Then on your laptop/PC you connect to the box with your browser using http://ipaddressofbox:port. VLC player will open the stream when you download them.
-
After a full scan install and run the autobouquets plugin which will add TP changes
- Extract dvbsnoop from zip file and ftp across to /usr/bin change permissions for this file to 777
- Extract autobouquets.zip and ftp the directory Autobouquets to /usr/lib/enigma2/python/Plugins/Extensions/
- Change permissions of the autobouquets_e2.sh file in the Autobouquets directory to 755
- Then restart Enigma2 and then go to Plugins and you should see Autobouquets installed. Run autobouquets and it will create lots of bouquets of channels in the same order as SLY UK, it will take 10-15 mins.
The advantage of this plugin is you can set it to run on a weekly schedule. You have the choice of whatever SLY region you like and whether you want HD, Adult and FTA etc listed
-
Is the drive working in Windows? That command should format it as ext3. Format it on Windows and try again