Actually, S*y DE channels are opening every now and then. I hadn't checked it with your simple_config_by_atari files.
Posts by roda
-
-
Yes. The problem is I can only set up the client. I can't configure the card server (reader) because it's not mine;)
-
I lost S*y UK first and then a year ago S*y DE as well. I don't know what to do. I'm using the latest OScam on a 4K box running openBH. There are not many packages left that still open. And worst of all, which is next?
-
IWill this open all channels that the CCcam opens and will it also open up the S*y DE too?
Does your CCcam open S*y DE?
-
Good job! With your oscam.server decoding starts immediately.
The difference is mindblowing.
I removed reconnecttimeout = 60 from my oscam.server and I added:
enable = 1
cccmaxhops = 1
ccckeepalive = 1
Very many thanks .atari.
You convinced me. I am an OScam convert now;)
-
-
OpenBH 4.3.039
-
Inverto website:
QuoteThis LNB is a high performance product featuring the lowest noise figure available to address the need for superior reception under the edges of the satellite footprint skirt.
This is exactly my situation. Tuning 28.2E with a 6 years old Inverto Black Ultra I receive HD FTA channels in the morning only. Rest of the day only SD. Pointing the dish I receive either 28.2E or 28.5E channels, not both. Dish is 110 cm, larger is impossible unfortunately.Inverto Black Ultra gain is 60 dB with noise figure 0.1 dB (0.2 dB?). Is there any single output LNB out there that performs better?
-
Okay! Thanks. I will try CCcam 2.1.3 if I can find it for ARM.
It takes OScam longer to start descrambling after zapping to a coded channel, that's why I prefer CCcam.
-
Why oh why is it impossible to view more than one scrambled channel at a time with CCcam? Especially when they are on different transponders. Well, sometimes two channels run well simultaneously but the third channel freezes time after time. The softcam used is 2.3.8_cccam_mips_arm. My config file couldn't be simpler. Right now it consists of one line starting with C:;)
OScam however does the job without any problem. Therefore in order for QuadPiP to work I am forced to use 11.572-emu-r798-arm+mips on my Vu+ Uno 4K SE...
-
Thanks seagen for your help. Appreciate that:thumbup:.
Somehow after installing today's updates everything seems back to normal.
I'm going to make a complete backup of the image right now, to have a quick workaround if something like this, or even worse, happens again:shocked3:.
-
After installing yesterday's updates there is no single EPG anymore in OpenWebif anymore.
Neither in the mobile version nor in the full OpenWebif.
You get: error! Loading Page
There is no single EPG from the command line either:
wget -O - "http://vuplus/ajax/epgpop?sref…:2876:800:2:11A0000:0:0:0:"
This used to work before the update but gives now:
HTTP request sent, awaiting response... 500 Internal Server Error
Surprisingly MultiEPG still works.
Most likely the problem is in one of these packages:
enigma2 (was updated to 4.3+git27814+86bd261)
or
enigma2-plugin-obh-core (was updated to 4.3+git2109+ff0969f) -
Who knows how to get the VG-STC5000 USB camera to work in linux?
It used to work with a Samsung "Smart" TV until they discontinued the Skype app.
This shows up in dmesg on plugging it in a linux PC:
Code[ 467.880894] usb 1-1.4: new high-speed USB device number 6 using dwc_otg [ 467.981875] usb 1-1.4: New USB device found, idVendor=04e8, idProduct=2065 [ 467.981898] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 467.981911] usb 1-1.4: Product: USB2.0 UVC HQ WebCam [ 467.981923] usb 1-1.4: Manufacturer: Alpha Imaging Tech. Corp.
So it seems UVC compatible. Does it need a driver? Can I get a different (generic) driver to work?
-
Thanks for your reply. Yesterday this issue was solved by vuplus-community.net user KFL. If you follow the link in the first post of this thread, you will see what happened when I pressed the timer button. There is even a picture. And you will find KFL's solution.
BTW, I like your avatar. Red, beautiful:)!
-
Can I just replace the openbh enigma2-plugin-systemplugins-remotecontrolcode package by the Black Hole equivalent?
-
I install all the updates I receive. Sometimes three consecutive days. However, they don't seem to change much and more importantly, the Timer button still doesn't work.
If anyone can tell me where the OpenBH sources are and howto edit them, I'll do it myself. Can't be so difficult.
-
Who knows how to solve this issue:
https://www.vuplus-community.n…-button-doesnt-work.40311
Basically, the new model remote has a button that says "TIMER" and it shows the timer list perfectly with both BH and VTi, but it doesn't with openbh.