Posts by elmoemo

  • VU+ Solo, black screen after flash.

    Quote from nisroc

    I read yesterday about clones with stickers stating the version. I had a look and could not find any. I'll have another look when I get home from work but I'm pretty sure there were none.


    Are there any other tell tale signs of a clone Vu+ Solo box?


    When I looked I checked the box it came in not the actual box lmao it'll be on actual box on back near tuner and also on top of box saying download from this site.


    Sent from my GT-I9300 using Tapatalk 2

  • AJ`s Sly UK Channel List Support

    Quote from mahrkpat

    Aj's list can also be used with the F5s it is a good practice to delete your old channel list before you upload a new one also this advice from sattv5 is good:


    Didn't know that I always just upgrade by usb, without deleting first, is there a reason this isn't recommended


    Sent from my GT-I9300 using Tapatalk 2

  • 15 hours and counting

    Quote from pheonix

    Remove the lid and look to see if it contains the secret chip used to overcome the Vu+ security measures. Bear in mind that you wont get support for a Vu+ clone here.


    Sent from my GT-I9300 using Tapatalk 2


    Why not I got my clone help here


    Sent from my GT-I9300 using Tapatalk 2

  • S11 has stopped working - what to replace it with


    not sure about your box particularly but most if not all boxes will have a softcam/camds or something similar in the menu, in there u can set to active or start

  • how can i share that to my other box upstairs?

    Quote from musogeek

    You said you have read a lot and can't quite get it to work, so what have you tried and what is it you do not understand? Also please could you not hijack other threads with unrelated questions to save us overworked staff the job of moving them?:sheep:


    sorry bout the hijack, thanks for moving. Read elsewhere to install cccam on reader box so i can send the card info. I set up the f line with the user and pass of the upstairs box. in the upstairs box i put the cline with local ip address and port (from box and default) and user pass 01 02 etc. I also tried puttin the user info in the 1st boxes oscam config files

  • how can i share that to my other box upstairs?

    Now that I have set up so my duo reads the card for movies how can i share that to my other box upstairs? I have read a lot of forums about it but cant seem to get it to work at all :(


    my card is from a box set up last year and hasnt been out of the sly stb until the other day when i got movies trial, would i need the second box set up in a way that the card updates until movies runs out?

  • OSCAM No config files found please setup oscam first in etc/tuxbox/config

    Quote from master G

    Use the attached configs or the ipk installer, if you are going to use the ipk installer remove all oscam configs from /etc/tuxbox/config and oscam binary from /usr/softcams..


    To view oscam web interface type this into your browser http://192.168.1.87:8888


    Change 192.168.1.87 to the ip address of the gigablue quad..


    perfect to veiw my free month of sly movies so i can record for when subs out :D thanks

  • S11 has stopped working - what to replace it with

    Quote from StupidMonkey

    Ordered it, had a read up and not really the wiser what its going to do for me exactly. However if its more stable and I can see that you can wangle a 7-day EPG plug in so all good. Seems scarce on channel lists for these, or I'm blind or stupid(monkey) but I'll try and get my head around it.
    Went for Vix software as reading a little seemed to be the one most liked.


    I'm sure I'll fumble my way through and work it out :)


    Thought about spamming for the extra £5 off if I had 10 posts on here but I dont know enough to post anything worth while posting about this stuff :)


    Not familiar with that box personally but woulda recommended the f3, up and running for a year now and not a bother, use laptop for epg, also like nbox 5800sx for 130 and twin tuner and 7 day epg :)

  • Anyone got this yet? new WiFi-enabled ***+ HD

    Quote from visiondvd

    Does anyone have the new Sly hd box with wifi built in to it, and any info on the thing yet?
    I getting one tomorrow and wondering whether or not to use it.


    Why would you not want to use it? Not much info that I've seen but there's bits and pieces lol you could try and set up and try share card see if it clears


    Sent from my GT-I9300 using Tapatalk 2

  • NBOX 5800SX Receiver – Nebula Zero V2 Ultimate guide

    All info from various forums, (sataid, linux-support, digitalworldz) and from various members of forums, most notably tomthered and nano, reeves1985, laurals 53, lraizer for his autobouquets. (there are others and sorry if I haven’t mentioned you.
    I wrote this guide as not all the answers seemed to be available for me to understand on one forum so decided to do a noob friendly guide.


    You will need:
    The NBOX receiver
    A PC/Laptop
    The Nebula image
    USB pen
    DCC or VuCC (the later is my preference)


    First off you’ll need to check what boot is already loaded on your box – turn the box on and read the display, if it says nBox then you can install this image on the box.


    Grab the Nebula image and extract it to a usb pen, you will also need to download the update file so your usb pen will have the following files: rootfs.img, uImage and update.


    Now put the usb pen in the nbox and turn on. As its booting press the up arrow (on the box, not remote as I done) and press ok when you find UPDT. The box will update to nand (that’s how mine runs) and you may need to reboot when finished (cant remember for 100%).


    Congratulations you now have the image running. Follow on screen instructions to set up network and tuners. Remember ANT2 is actually the primary feed so if you only have one feed going to the box it needs to go there.


    If Its not in English, press OPT, select 2nd last option, select 2nd option, select 3rd option, and English (if that is your preferred language).


    Now to set up autobouquets for sly UK – You will need dvbsnoop and enigma2-plugin-extensions-autobouquets-e2-201208212300-all.zip‎.


    When FTP’ing with vucc or dcc remember the user is root and pass if pkteam
    FTP dvbsnoop to usr/bin and the .ipk file to tmp folder (on root). Once done go back to your tv and press blue on remote, go to plugins, addons, ipk menu, install and it will install for you. After about a minute or 2 you will have to reboot the box as it will freeze but don’t worry it will have installed fine. Once rebooted go to an sctive channel (pay channel like *** sports) press OPT, setup, service searching and automatic scan. When finished pres OPT, plugins and autobouquets E2. Select your area in HD or SD and press ok.


    Now you have channels in order. Only 2 things left to do EPG and Oscam. To set up epg press OPT, setup, crossepg, configure, storage device – HDD, setup the rest as you would like ie time to schedule download etc. Once done go to OpenTV providers and select *** uk 28.2, press green and then yellow to download. Once that’s done you will have a 7 day EPG. There’s another EPG called coolepg I think available in the plugins menu. I had to reboot to load epg data.


    Last but not least Oscam (for c-line and n-lines). Press OPT, plugins, green (on remote), emu, and download config_oscam then download oscam_3144 (it’s the only one that worked for me but others may work for you). Go to PC or laptop and open vucc and select ftp once logged in. On the right hand side go to var/keys and edit oscam.server. For N-line it will be –


    [reader]
    label = <anything>
    protocol = newcamd
    key = 0102030405060708091011121314
    device = DNS_address,port_number
    account = username,password
    group = 1
    fallback = 1



    Just change red parts to your line info (leave a comma with no space between user and pass etc. Once done press blue, emu manager, select oscam (press right), press yellow to disable EMU in standby and up to enable mapping CA1 to CA0. Press red to stop and green to restart. Back out and your channels should all now be working.

  • openbox x5 won't record second programme

    Quote from Mee®kat

    Lolz//// It would,nt be anything to do with these boxes only having a single tuner would it???


    upgrade your firmware as stated...you also have to realise that a 7 day epg is problematic and does not work on these boxes//only now and next...i,m afraid i have to be blunt here and inform you to get yourself a decent box if you want reliable features like this!!!


    some of us cant afford to stretch for a better box. He said the issue happens with recordings hours apart