As you wrote, your TV has a 2.1 HDMI input, does your new receiver have 2.1 HDMI or is it 2.0? Try changing to a different cable if you have one. I don't know if you have Hot Bird satellite, if you do, watch the Hotbird 4k1 channel and see what kind of picture you get. It's a free channel and has a resolution of 3840x2160p50.
Posts by pinokio0
-
-
Do you mean satellite channels or IPTV channels?
-
Everything works as it should gp4.2. Dreambox two
-
Display More
Well ... I've asked Captain a procedure roll back GPT to Legacy !
and to implement ChkRoot on Dream ONE/TWO ! He is not interested
i such a project !
The answer is NO !!!
I've done a similar complex test on Amiko Viper 4K V30 ! is working like
a charm ! what a good quality work !!!
mihaip, thanks for the information. It's a shame they don't do this on Dreambox Two because many people have the problem. I hope they will do it one day.
-
Install the gemini 4.2 image and it will work for you. It is not difficult to change other software if you want it to work for you.
-
Display More
In the last two days I've made an intensive testing with
ChkRoot on DM 920 UHD ! First of all ... it works like a charm !
all is a mater of respecting some simple rules ... I've done
some 20 installations in the 6 Slots without any major incident !
- don't use yet OATV 7.6 as BASE image ... it is at his beginnings
- don't use DreamOS images in ChkRoot ( Captain rule)
- use Multiboot Manager or Multiboot Helper plugin to navigate
- reuse without fear old images Slots !
- most advanced OpenE2 image after OATV comes from raed
- install the Multiboot Helper plugin in any SLAVE image
wich does not have a functional Multiboot Manager
as follows ...
Download link : https://mega.nz/file/j4UBwByY#…mPRHlboRRzIQ6S6WeZWQefJaI
Codeopkg install --force-depends /tmp/*.ipk- discard OpenHDF , it does not understand Triple Tuner !
- if something wrong is happen ... use a "cleanup" helper
then revive ChkRoot ... always works !
- don't expect Recovery Mode to repair damages ! it doesn't !
is just a last refuge if system does not start at all !
Codeecho 0 > /sys/block/mmcblk0boot1/force_ro dd if=/dev/zero of=/dev/mmcblk0boot1 bs=512As a rule ... this works even if the boot process starts,
you have Logo on the screen and is hanging for some
reason ! Telnet already works and can fix the STARTUP !
Mihaip Can it be installed on a dreambox two?
-
Display MoreDisplay More
Vad visas när du gör en manuell skanning på Astra 19.2e Sat?
[bifoga='311225','ingen','falskt'][/bifoga]
[bifoga='311224','ingen','falskt'][/bifoga]
https://www.lyngsat.com/uhd/Astra-1KR-1M-1N-1P.html
Kan det vara så att få kanaler är UHD?
Jag fick tag på kanalerna du visade.
You have the hotbird 4k1 channel that is open, you can see 3840x2160p50
-
.
Nyinstallerad Newnigma2 Image. Naturligtvis inga Gutemine Plugins, jag känner till problemen. BMX fungerar perfekt på Dreambox 900 med Newnigma2.
Tack för ditt fantastiska arbete och din hjälp!
.BMX works without problems on my dreambox two. I tested it. Gemini4.2 image
-
.
@ gerard57 - Titta igen och noggrant på det första inlägget i denna tråd. Jag ser en DEB-, en IPK- och en ZIP-fil i bilagorna.
.He probably forgot to put his glasses on. :leende ansikte:
-
https://play.dreambox.de/download/
I don't see that you have any new software here, unfortunately. -
.
Display MoreDisplay MoreYou don't have to create it ! the multiboot exists and can be created using a a script
under OpenATV ! and is working safe ! Using it into a image if is already there is easy
and is a must !!! If you are not using the Multiboot , and your image is written into a
partition , you cannot exit from your image elsewere ! and you are forced to go always
into GPT booloader menu witch does not work as expected ...
There are only two stepts ...
- step 1 - you must mount the GPT control partition "mmcblk0p4" into local /data folder ,
this is done once for all at the immage boot as last action in "fstab" :
/dev/dreambox-data /data auto defaults 0 0 or
/dev/mmcblk0p4 auto defaults 0 0
Starting this moment your /data folder will show the GPT control files ... the key one to
control reboot behavior is "BootConfig.txt"
default=1
details=0
timeout=3
lock=0
fb_pos=100,400
fb_size=1080,300
[Slot 1 - OpenATV 7.3]
cmd=ext4load mmc 1:5 1080000 /boot/kernel.img;bootm;
arg=${bootargs} logo=osd0,loaded,0x7f800000 vout=1080p50hz,enable hdmimode=1080p50hz fb_width=1280 fb_height=720 panel_type=lcd_4
[Slot 2 - OpenPLi RAED]
cmd=ext4load mmc 1:6 1080000 /boot/kernel.img;bootm;
arg=${bootargs} logo=osd0,loaded,0x7f800000 vout=1080p50hz,enable hdmimode=1080p50hz fb_width=1280 fb_height=720 panel_type=lcd_4
[Slot 3 - Vom vedea]
cmd=ext4load mmc 1:7 1080000 /boot/kernel.img;bootm;
arg=${bootargs} logo=osd0,loaded,0x7f800000 vout=1080p50hz,enable hdmimode=1080p50hz fb_width=1280 fb_height=720 panel_type=lcd_4
[Slot 4 - OpenATV 7.4]
cmd=ext4load mmc 1:8 1080000 /boot/kernel.img;bootm;
arg=${bootargs} logo=osd0,loaded,0x7f800000 vout=1080p50hz,enable hdmimode=1080p50hz fb_width=1280 fb_height=720 panel_type=lcd_4
[ Recovery ]
cmd=imgread kernel recovery ${loadaddr} 0; bootm ${loadaddr};
arg=${bootargs} logo=osd0,loaded,0x7f800000 vout=1080p50hz,enable hdmimode=1080p50hz fb_width=1280 fb_height=720 panel_type=lcd_4
- step 2 - from user selection into Multiboot Menu you must update the line "default=1"
to selected value 2, 3 or 4 and close the file.
Thats all ! at reboot GPT will restart into the selected image !!!
I'm doing this by hand ! from WinSCP and is working !
Is this will solve the issue on post #8
I wish to install OpenPli 9 image on SD card via OpenATV image.
Open ATV cannot see the latest image offers only old copy of OpenPli with zip compression
I used to insert it via USB on Open TV 7.3 via SD card, but now it won't work when I tried it on Dreambox Two. I don't know why.
-
You should never buy a receiver when it first comes out. It's best to wait to see if software will be released frequently. If you have to wait a year for a software release, you shouldn't buy it. I think this receiver is a complete failure.
-
If your remote does not work, take the keyboard from the computer and insert the USB cable into your receiver and you can write your playlist without using your remote.
-
Why not, if you all agree on the receiver for KiddaC, I will of course donate without any problems in that regard. KiddaC does an excellent job and helps us keep everything running smoothly.
-
.
.Allt fungerar bra för mig.
vilken bild använder du?
.I am using gemini4.2-unstable-OE26 image
-
.Everything works fine for me.
-
It's up to you if you don't want to, of course you don't have to, or if you have a backup, install it and see.
-
Complete image
-
I had it a few days ago with my EPG channels because I had them on every channel, but when I switch to a certain channel it disappears on all my channels that I had in the folder. This happened to me until I reinstalled the software and it works without problems.
-
.
det funkade bra igår
.It could be that it worked because it happened to me that the example works today and doesn't work tomorrow, not only EPG but also other things. I solved it by reinstalling my receiver and it worked. I don't know, but that's how I solved my problem because if I installed EPG several times and always got the same error, it could be a software glitch, but if you don't want to then you have a problem.
