Posts by pinokio0

I hope he will solve the problem he has.

He says that he can't find anything on the thor 0.8 w satellite

I don't know if we understand each other well. I see that your cable is plugged into receiver A. I was thinking of the disagc a/b/c/d which is at the satellite antenna, or does that cable go directly from the LNB head

You should try satellite if you have 0.8W Thor 5/6/7 Intelsat 10-02. I see you have c band thor 5/6/7 Intelsat 10-02 and ku-band Thor 5/6/7 Intelsat 10-02.

.If your cable is only in port A and you don't have any more cables connected to ports B, C, D. Try only thor, and don't have these other satellites to search for, then see what happens. That c band thor 5/6/7 is thrown out and try another thor if you have one.

.Do you have disegc a/b/c/d or not?

.If you have disegc a/b/c/d, you have to see in which port you put the cable for thor 0.8 w. Is it in port A or in port B or C and D

.Do you have disagc a/b/c/d for four satellites or do you not have disagc a/b/c/d

.See if you have a satellite 0.8 Thor 5/w/h Intelsat 10-02

He has a Gigablue UHD UE 4K-box.. Opena 7.3 has inserted satellites and it is probably not the same as his. So he probably does not have all the satellites he needs in the receiver.

.Insert the satellites.xml-file into your receiver if you don't have it, look at your IP address in the receiver and connect via computer via the ftp program and insert it into the etc/tuxbox folder. Start your receiver and enter your tuner and find the thor 0.8 w satellite and install it in tuner for only one lnb head. Then you go to search manually or automatically on your receiver. I don't know what your receiver is like and how it works, but those who have the same receiver as you will help you.

It doesn't matter which receiver it is if it has a 4k resolution. It's a matter of what kind of TV you have if your TV doesn't have a lot of functions in adjusting your picture that you open in 4k resolution. I have a dreambox two and an OLED Signature 65 and it has various functions in adjusting the picture. fantastic picture with dreambox two. The thing is only in the functions you have to set on the TV to have an even better picture with 4k resolution. If a person can't see well, he doesn't care which TV or box it is, it doesn't matter what the picture is, it's important that he opens only in 4K resolution

. If Gemini 4.2 doesn't work on dreambox two, you can also try dreambox 900hd, insert it and try it and it works for sure. I'm the test on dreambox two Gemini 4.2 and it works without problems

My friend, I have never had a problem installing an image either. I don't have a problem with ftp because I have communication with Telent, but the problem is installing another image through the website, because it loses its IP address, and just when I installed Opena TV 7.3 to see if the optical cable works, after that I couldn't install another image because it loses the IP address when I want to install the image.

The best option is to take a hammer and slowly tap the parts on the dreambox two. Maybe they will install properly heh

.Dreambox 720hd works. The problem is dreambox two 4k. I have a problem with it. I can't install image on it.

.toyssoft, I thought about that last night as you wrote and this morning I did it with no results. When I start Opena TV 7.3 in Recovery Mode dreambox just stops for a while as if it is looking for an IP address and after that just continues normally on Opena TV channels. Only through The SD card has an image with an IP address and when I try to install it via the website, the IP address disappears again. Thank you for your help in any case. I don't know if there is an image that I can insert via USB to open TV 7.3 and not use anymore. SD card because I would try to test another image. :Head Banger:

I managed to install Toysoft through the usb COM3 port Bootloader restore and it did everything as it should, but when I tried to install again through the website, it lost its IP address again after seven seconds. I think it's something to do with the image in dreambox. I inserted this the last Opena TV 7.3 to try the optical cable to see if it works on Opena TV, but now I can't install via the website only on the SD card. I can't even turn off the dreambox via the remote control. I tried to test the GP4 image on the SD card to see is able to turn off the dreambox via the remote and can do so without problems.

Yes, because I have cables, I tried it. I have Unifi Network private internet, which I make configurations and ip addresses myself, but it won't work.

I can install dreambox 720 hd without problems. I tried to change the other ip address but it always returns to the same ip address. Yesterday I had new drivers that I installed on the unifi switch and after that everything went wrong. Today I deleted everything and reinstalled everything as it should but dreambox two won't to insert a new image. I connected it to the Dream Machine Wifi router to see if it will work through it and it won't. Toysoft I don't know if I should try using USB to install an image if it can.

.Toysoft öppnar ip-adressen till dreambox två genom hemsidan och den visar mig att jag kan installera till exempel en ny bild. Under installationen försvinner helt enkelt ip-adressen till dreambox two och webbplatsen. Det är väldigt konstigt att den tappar IP-adressen.I have communication via telnet because I have an image in it and it works on dreambox.