Posts by lambo

Hi all can anyone recommend a saorview aerial for the Dublin area, indoor or outdoor ?

Quote from TH3-J0K3R

OLD NEWS this is why superhub3 vermin was attacked few month back ;)
no wifi is secure hell goverments cant secure there shit so why can CHEAP/SUB GIVEN MODEM/ROUTERS ?

thing is if yah want secure stuff set up a pc firewall only before your network connects or use devil linux ;)

cause yer FREE ROUTERS are wide open in reality , gota <3 those xtra networks vermin , bt stick in yer modem to use excess bandwidth for folks on mobils ae

Quote from johndeere88

Ye provider supplied routers are mass produced crap. Even leaving upnp on as default is laughable

I’ve only ever used my own router

Ddwrt for years now with zero problems

not that old

KRACK exposed a vulnerability in the key share exchange in the wpa2 protocol in all wireless routers nothing to do with hardware

ive just put this on my prismcube can you tell me what the emu is for

Quote from leroy123

the only way around this was to throw my crappy talktalk router :50_002: into the bin and plug in an open reach modem which i got from my brother who was not using it anyway the tplink router is working flawlessly with ddwrt and dns ALSO THE DDWRT LEASE TIMES ARE RENEWING WITHOUT RESTART:dancing2:

thanks for you help guys really appreciated :fist bump::thumb::thumb:

glad to hear you got it sorted :thumb:

Download sqlitestudio
get your pm.db from the box
open sqlitestudio
drag and drop pm.db into the left pane
double click pm_fav_t0
click Data
5487f51a42.jpg

each number ex: 215-202-216-203-861-150-28-29-852- represents a channel

double click pm_prog_t0 click Data
the row progRowID hols the channel number
1ae1a4.jpg

make your list in notepad ex: 215-202-216-203-861-150-28-29-852-
and past it into your categeory in pm_fav_t0
click green check mark to commit the changes

put the pm.db back onto the box
reboot

Quote from leroy123

the reason i have the ddwrt router as the talktalk fibre router does not accept no ip ddns ive checked the talktalk router it has a bridge setting when restart the ddwrt router it gets a wan ip from the talktalk router and internet including the ddns works on the box but the problem is the wan ip is renewed every 10 min and i have to restart the ddwrt router each time or else no internet can anyone help me to configure the ddwrt router properly with the talktalk router in bridge mode thanks in advance

you could look into inadyn.. https://help.dyn.com/inadyn/

see if there is an update firmware for dd-wrt
dynamic dns on ddwrt
https://www.youtube.com/watch?v=coJqqWPEUlc

Quote from leroy123

I've just checked on both routers the ports are opening fine so it's oscam that's not reading the dns??

oscam will just listen on whatever port number you selected it doesn't care about dns

setup dynamic dns on the provider router take out your wrt router and plug your oscam server into the provider router port forward to the oscam server and see if you can connect

Quote from leroy123

if you talking about the server ip address yes its static in ddwrt

[anticasc]
enabled = 1
numusers = 1

I dont use anticascading bt as far as I know this will only allow 1 user

[cccam]
port = 12100
nodeid = D1603813102013E0
version = 2.1.3
reshare = -1

based on your cccam port and your oscam.user
if your client is using cccam his line should be like this like this
C: yourdnsname.com 12100 waky baky

is this correct ?

Quote from leroy123

you may need to put the put the wrt router into the dmz in the provider router which will open all ports to your wrt router
ive done the above ports a ok the are open somehow the user is not login on on oscam i will try local ip see if that works first

- - - Updated - - -

USER IS WORKING FINE WITH LOCAL SERVER IP??

the ddns is working fine ive noticed the ddns when entered into a web browser directs to my providers router and not ddwrt

how can i make the ddns to direct to to the tp link router running ddwrt?

Display More

thats because your provider router has your public ip address, if you can enable bridged mode on your provider router your public ip address will be passed onto your wrt router, but this is not needed
have you enabled a static ip address on your wrt router so it always stay in the dmz

Quote from leroy123

forgot to mention im on fiber and the tp link is connected to the main providers router ive searched something about dmz to setup in ddwrt to by pass the first routers firewall?? how can i do this with ddwrt

you may need to put the put the wrt router into the dmz in the provider router which will open all ports to your wrt router
then in your wrt router open the port for your oscam server
or in the provider router see if there is a bridged option whch will put the provider router into modem status

Quote from Inspiral

lads this card has not received any EMMs again??
& has ran out of its entitlements ?

i have had my [dvbapi] with added as >>Artorius<< suggested
au = sky-uk

& in oscam.user

with au = 1 added also..
but card has not updated? gonna have 2 do a Fresh install again in S*y box to revieve it

any other suggestions i can try please to recieve the nessesary EMM`s

cheers

Display More

in oscam.conf i have au = 1
in oscam.user i have au = SKYUK
SKYUK is the label of my reader in oscam.server and I am receiving EMM's

Quote from master G

Someone trying to connect 2 or 3 times with the same account details.

its a zgemmah2s a friend in work I just added recently, would there be any other reason why this might happen other than him given out his c line

7484969da54a.png

why is it sometimes there is a 2 or a 3 here

i want to use my prismcube ruby as my server i am using a dm500s with oscam + cccam at the minuet but the card reader is on the way out,
as there isn't a cccam for prismcube will oscam update the card on its own in this box if yes could someone post the configs please
thanks

thank you master g

- - - Updated - - -

ive spent the day at this it worked then stoped then worked now oscam wont even load

- - - Updated - - -

i have it going yahhh i built oscam using the tut from thatfellow all is fine

Quote from master G

Yes it still works buddy. You setup a share for one of your client boxes that sends an EMM/updates entitlements, you don`t need a sat tuner card.

thanks master G

- - - Updated - - -

- - - Updated - - -

Quote from master G

.......

I have it set up would F: test test 2 0 1 { 0:0:1 } send emm's to update

are there any configs around for 0963 for this setup using infinity usb pheonix
thanks

- - - Updated - - -

Quote from master G

....

I have it reading the card but i am using the configs from my dm500s running oscam + cccam
also the cams dont auto start i am using the latest debian are there any config files aroun for this

Quote from master G

Snip...

master G is this method still working I want use an old laptop to replace my dm500s clone as server
i have been using the 500s to view as well but some channels sometimes freeze there are only 4 clients,
and without a sat tuner card in the laptop will the card (0963) still update
thanks

Quote from ferretuk

Got my prismcube yesterday and have installed oscam and mgcam on it the cams show up so i know they are installed
configuring to get the cam to work
used cccam to oscam coverter converted the cccam cline to oscam.server
replaced the oscam.server i created in mnt hdd0 programs tuxbox config didnt work for either cam
do i have to place a SoftCam.key in a directory on the drive is my first question
also when i view an oscam.server file in notepad it doesnt resemble the oscam.server layout of the oscam.server file the converter created any help would be welcomed
Thanks all

Display More

if your just trying to connect to server use mgcamd 1.35a
create a file called cccamd.list open it in notepad++ put in your c line save and place it in /mnt/hdd0/programs/keys

this is mg_cfg this also goes in /mnt/hdd0/programs/keys

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }




# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 00 }




# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 02 }




# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 }




# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }




# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32	cccamd netclient, card list saved as /tmp/cccamd.info 
#    	(ECM only, supported server version up to 2.1.1, later not work)
G: { 37 }




# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 00




# network ecm timeout in seconds
K: { 02 }




# newcamd dead routes connect retry, sec
Q: { 10 }




# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 01 }




# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password




# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80




# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log




# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }




# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 01 }




# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 04 }




# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }




# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 13 }




# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

Quote from master G

CCcam is not available for the prismcube ruby..

yep I was just about to say none of them will run, can you tell me if oscam 1.20 will update the card 0963 ,
i have oscam + cccam 2.1.3 on a dm500s but i want replace it with the prismcube as the server
thanks

anyone know where i can get cccam 2.1.3, i want to run oscam with cccam 2.1.3