Posts by K00

Hej,

...altså, picon mappe på mine hdd er mellem 75 og 112mb og 11000 - 17000 files!!!!!! Utroligt!!!!!!! Jeg tror ikke at du er interesseret i det.....(eller hvad?!? ;)))

Vh

Jeg kigger på det når jeg kommer hjem iaften.....

hej,

hvis jeg har de picons er det fordi enten har jeg download via image (plugin>download plugin>picons) ellers fordi jeg havde installer nogle settings extention som de "kom" med de picons.......du skal tænke at primær bruger jeg hotbird 13e men jeg havde også altid dvb-c kabel i decoder (from yousee)

ps jeg kender ikke opentsimage ;))

.....jeg tænker at hvis du ikke kan finde noget som helst, jeg kan sende dig den picons mappe jeg har på HDD ;))))

og hvis du vil , jeg er åben til hjelper dig per telefon....du skal bare sende mig din mob som PM (private messenger ;)))

ciao

hej, hvad tænker du? hvad skal du enlig brug??? jeg har danske picons på mine decoder.....hvis jeg kan jeg hjelper dig gerne ;))))

vh ale

hi, but does the "blink rec" on the display work for you? (selected from display conf menu)

not for me with no image, (standby or in use only displays the time)... and the box is new... thanks everyone!!!

ciao, ma a il "blink rec" sul display vi funziona? (selezionato dal menu conf display)

a me no con nessuna immagine, (standby o in uso visualizza solo l'ora)...e il box è nuovo... grazie a tutti!!!

Quote from icecool_denmark

Hej Det er ikke nogle danske tv kanaler på hotbird og hvis du vil se det så er det på thor satellit 1° vest 10934 V DVB-S2/8PSK 25000-3/4

men de er kode i Conax Nagravision Videoguard

Hej, ok...mange tak!!!!

Men er der "mulig" for at se dem uden card?? Er der alt Yousee pakke??

Grazie 1000 ;))

Hej,

(Jeg håber I kan forstå hvad jeg skriver ;))

Jeg normalt bruger parabol i min kolonihave på 13e for den italiensk pakke men min kæreste vil gerne se dansk fjernsyn.....hvad kan jeg gøre med min octagon sf8008??? Altså jeg tror hun kan se et par kanaler med den analog antenne men jeg ved ikke hvad jeg kan finde på hotbird som dansk og "gratis".....

og... hun streamer nogle gange med pc DR1/tv2 osv , er der ikke en plugin til E2 box for at streame danske kanaler???

Mange tak til alle.....

Ciao!!!

Quote from mola10

Which is the third image ,oscam samur version ? Thanks

ciao,

openatv worked....pli & egami don't....oscam http with cfg from egami feed 11726 (I think ;))

Quote from benhur

Quote from K00

google translate ;)))

hi, that rentry url doesn't work for me and then I don't understand why the last 4 digits are missing (and I think that if other users had the same problem, this discussion would be clogged up so I think the problem is me or my box)

ps if I update manually via webif with the complete emm everything works!!!

ciao, a me quel url rentry non funziona e poi non capisco come mai gli mancano le ultime 4 cifre (e penso che se altri utenti avessero lo stesso problema, questa discussione sarebbe intasata per cui penso che il problema sia io o il mio box)

ps se aggiorno a mano via webif con la emm completa il tutto funziona!!!

of course thankz a lot!!!! (e un grazie speciale va a Samur!!! ;))

ciaooo

Display More

su oscam.server eliminate questo valore :

on oscam.server delete this value:

Code

emmcache                      = 1,1,2,0

lasciatelo senza questi valori : meglio se lo fatte da webiff ::: abbassa il tempo a 5 min ed attendi con pazienza che aggiorna !!

leave it without these values: better if you do it from webiff ::: lower the time to 5 minutes and wait patiently for it to update!!

Display More

ciao e grazie...

non sono arrivato a tanto perché ho scoperto che l'url funziona benissimo così com'è perché semplicemente su due immagini non mi aggiornava ma su una terza si!!! ho messo un altra versione di oscam col cfg/http (sempre di Samur e anche se l'ho presa dal feed dell'image, ho dovuto dargli il 755 ....per fortuna ho imparato qualcosa ;))) ho cambiato il pastebin con il rentry e puf, carta aggiornata!!!!

....ciao e alla prox....

Hello and thanks...

I didn't get this far because I discovered that the URL works very well as it is because it simply didn't update me on two images but on a third it did!!! I put another version of oscam with cfg/http (also from Samur and even if I took it from the image feed, I had to give it 755...luckily I learned something ;))) I changed the pastebin with the rentry and poof, updated card!!!!

....bye and see you next time....

google translate ;)))

hi, that rentry url doesn't work for me and then I don't understand why the last 4 digits are missing (and I think that if other users had the same problem, this discussion would be clogged up so I think the problem is me or my box)

ps if I update manually via webif with the complete emm everything works!!!

ciao, a me quel url rentry non funziona e poi non capisco come mai gli mancano le ultime 4 cifre (e penso che se altri utenti avessero lo stesso problema, questa discussione sarebbe intasata per cui penso che il problema sia io o il mio box)

ps se aggiorno a mano via webif con la emm completa il tutto funziona!!!

of course thankz a lot!!!! (e un grazie speciale va a Samur!!! ;))

ciaooo

Quote from biko

Quote from K00

Hi,

Is possible to make text editing (and save) in files like bouquet.tv or display.xml ?? (I can read but not change)

PS I have zero experience but what is "enable/disable wrapping"?

Thank you again!!!!

View Mode:

If you click OK on text formatted file (.txt, .xml, .tv, .sh, etc), it wil open the file viewer in wrapping mode. You can use the menu to enable/disable text wrapping.

Edit mode:

Point to the file, click Menu and select "Edit". This will open the file editor where you can change things then save the file or cancel the changes. In this mode, there is no wrapping. This mode can also be used to view files.

Note: Saving changes to your files will always create a backup copy (xx.bak) of the original file before saving the changes .

Display More

Yes...I see!!!! Thank you!!!!

Hi,

Is possible to make text editing (and save) in files like bouquet.tv or display.xml ?? (I can read but not change)

PS I have zero experience but what is "enable/disable wrapping"?

Thank you again!!!!

Quote from biko

Quote from K00

Great job!!! Thank you it's wonderful!! (File manager )

...In the bouquet editor, Is possibile to Copy a channel and go "back" to an other bouquet and paste there? (If I do, I lose the selection)

I know you are "at work"... No stress!!!

Thankz again!!!

Ciao Ale

You can now copy services between bouquets in the new version.

Display More

Thankz a lot.....you &co. are the best!!!!!

Great job!!! Thank you it's wonderful!! (File manager )

...In the bouquet editor, Is possibile to Copy a channel and go "back" to an other bouquet and paste there? (If I do, I lose the selection)

I know you are "at work"... No stress!!!

Thankz again!!!

Ciao Ale