Posts by _pinky_

Have Zero 4k and have image from here RE: VU+ Zero 4K OpenATV 7.4 full backup ciefp

First problem

Before a week or 10 days i can't execute any entries feed from youtube(get the same error message

There was an error in exact video url:

Bad Request

Video id ...............

)

Second problem

Install chromium and i get this error mesage

1 plugin is not aveilable.

- Extensions/Chromium

bad magic number in Plagins Extensions/Chromium':b '\xcb

'

Keep warning

Clear warning

Any suggest for these two problems ?

Thanks in advance,

When i use Multi Stalker 1.5 in this package and when use keyboard(above 1) and at the end when finished with add/edit hit enter(green button) get blue error screen.

This option works in previous Multi Stalker 1.4 version, well can ziko fixed that error if he can, thank you :D

Is there any other stalker player as stalker 1.3 beta which works on openatv-7.2-vuzero4k ?

What is the last version that work at openatv-vuzero4k

Hello,

Is this multi stalker 1.3 beta can install at openatv-7.2-vuzero4k-backup-ciefp ??? and how ???

Quote from master G

Quote from _pinky_

How we will know if oscam is configured well

If you are using the files we linked that comes with configs, everything is already configured for you.

Quote from _pinky_

Only we can have icam lines ???

If its still not working after doing all the required steps then your provider doesn`t have those channels.

Use the oscam webinterface log to find out what`s happening while viewing the modified ICam channel list.

Thank you for your effort till now and thank you very much for your help, but when i get right line everything is ok now and i can watch sky de

In the moment i watch DAZN 1 and for all mates which can't watch icam SKY DE the biggest problem is that to find or buy ther line with icam.

Once again thank you.

How we will know if oscam is configured well, Only we can have icam lines ???

Quote from master G

Quote from _pinky_

and here is unclear where can i watch • 19,2 E - Sky DE • icam :: streamrelay :: ??? on Oscam-icam_ r11714-798 or OSCam r11711-798 ????

What is unclear? Install either of the softcams i linked. Add your reader to those configs and don`t edit anything else. Change the setting in the E2 image. Copy the custom stream relay bouquet list. View the SKY DE channels from the custom channel list.

Quote from _pinky_

and can someone write where need to update oscam.conf file ????

If you are using the OSCam or NCam i linked you don`t need to edit anything.

Everything has been explained already in the link i provided you earlier.

Thread

Everything you need for ICAM - Sky ITALIA, Sky UK & SKY DE - All Enigma2 Images and Receivers

Its now possible to view Sky Germany, Italia, and UK channels with NCam or OSCam that has an ICam patch along with a custom streamrelay channel list.

First thing you need to do is install either NCam or OSCam. Both are configured exactly the same way.

These files come with everything already pre-configured for ICAM .
No other edits are required, just add your reader to ncam.server or oscam.server. Configs are found in /etc/tuxbox/config

OSCam for All E2 Devices & Images .ipk (OSCam for Sky DE, IT …

master G

Oct 13th 2022

Display More

Again unclear why i need to install again oscam _ r11714-798 from here Everything you need for SKY DE ICAM all enigma2 images and receivers

when i have allready Oscam-icam_ r11714-798 ???

by the way i installed enigma2-plugin-softcams-oscam_11714-emu-r798_all.ipk because of my receiver VU+ ZERO 4k and get new softcam.oscam_11714 but in that file i can't find where is oscam files ????

or i need to install that plugin and that oscam need to replace with oscam-emu(11711-798) in /usr/bin and than in /etc/tuxbox/config/oscam-emu where is all oscam files in oscam.server need to add c line where i have SKY DE working with icam and streamrelay ?????

Hello,

I have VU+ ZERO 4k and today i made new image(openatv 6.4 from this RE: VU+ ZERO 4K OpenATV 6.4 full backup ciefp) on it.

I think because is from back-up i thought that all configuration is done, but that is no in that case.

There is oscam(BY-DreamSatPanel_Oscam-icam_ r11714-798) and

oscam-emu(OSCam r11711-798)

and here is unclear where can i watch • 19,2 E - Sky DE • icam :: streamrelay :: ??? on Oscam-icam_ r11714-798 or OSCam r11711-798 ????

and can someone write where need to update oscam.conf file ????

Thank you master G for your quick answer, i read it and then it is much easier. Thank you once again.

Now i like to ask something about this image,

i use this softcam Oscamicam - OSCam r11714-798 ( oscam.server /etc/tuxbox/config/oscamicam ) - SKY DE

but when i try to open whatever channel from these bucket

SKY - DE(• 19,2 E - Sky DE • icam :: streamrelay ::) or SKY - IT(• 13,0 E - Sky IT • icam :: streamrelay ::)

i get only black screen.

Additional when i see -DreamSatPanel_Oscam-icam_ r11714-798 in web page

in section clients (2\2)

anonymous dvbapi get from some reader ok

but another client i get not found (0 ms) probably here is not ok and therefore i can't get the picture ????

or something else i need to configure ???

Hello,

I try to make last image of 02.10.2022 of ciefp, i follow the instructions put in previous page(RE: VU+ ZERO 4K OpenATV 6.4 full backup ciefp) , copy the vuplus folder to usb, I turn off the receiver, insert the usb and turn on the receiver on the back button. After that i wait 15-20 minutes, nothing happe it just flashes on the front of the receiver ???

P.S. Just turn off the receiver on the back button, then turn on the receiver on the back button and it show OpenATv

Helllo,

Did someone test if this plugin XtreamTVarmv7a_4K_0.2.3.ipk work on VU + ZERO 4K OpenPLI V8 ???

i confirm that i can install XtreamTV on VU + ZERO 4K OpenPLI V8, but i can't save dns in profile ???

Somewhere i make mistake, can someone help where make mistake ???

try connect mgcamd on dm500s with remote cccam server

in cccamd.list i put c line
C: mydyndns.org port user passw

in mg_cfg i have

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

and use the e1-mgcamd_1.38_111023.tar.gz download from here
e1-mgcamd_1.38_111023.tar.gz download - 2shared

two days before i can connect with this configuration, but when i try to use camd3 protocol something happen and now i can't connect with either ways.

Please any help will be grateful.

Pinky

try connect mgcamd on dm500s with remote cccam server

in cccamd.list i put c line
C: mydyndns.org port user passw

in mg_cfg i have

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

and use the e1-mgcamd_1.38_111023.tar.gz download from here
e1-mgcamd_1.38_111023.tar.gz download - 2shared

two days before i can connect with this configuration, but when i try to use camd3 protocol something happen and now i can't connect with either ways.

Please any help will be gratefull.

Pinky

try connect mgcamd on dm500s with remote cccam server

in cccamd.list i put c line
C: mydyndns.org port user passw

in mg_cfg i have

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

and use the e1-mgcamd_1.38_111023.tar.gz download from here
e1-mgcamd_1.38_111023.tar.gz download - 2shared

two days before i can connect with this configuration, but when i try to use camd3 protocol something happen and now i can't connect with either ways.

Please any help will be gratefull.

Pinky