Codehi i can't connect with fxp. What is the password after the ip address? I did root and root or 0000. The software is very stable.
For ftp username and password: root. Use Filezilla and PuTTY or DCC,
Posts by NoNaMe1.1
-
-
For wida - "Not show Chanel format like. :1980/1080" I checked 1920x1080 full hd skin Pli-FullHD, Pli - FullNightHD, everything works.
For khaled2020 - These images are test images and many skins really don't work, because many old components don't fit. I check a dozen skins, only half of them work on new images. For example, the Elgato-HD-CN skin, I selected the components one by one to avoid the green screen at startup.If you want to launch your favorite skin, you need to contact the skin developer. I'm just a tester, unfortunately.
-
Try to replace the files that were uploaded by Ahmed Gazye.
Save your files before replacing.
-
can you share Screenshots how look this image?
-
To create a tar.gz I used image manager 2.6.
tar.gz this is for external flash. For installation in nand, a good instruction is here:
-
To change the language, you need to go to the Главное меню - Настройка - Система - Настройки GUI - Выбор языка - Select English
If you don't like the red LED in Standby mode, change vdstandby in /bin, don't forget the 755 attributes.
-
You can try the backup, but it is in Russian, two files usb and tar.gz in one archive. If the installation goes correctly, to change the language, you need to go to the Главное меню - Настройка - Система - Настройки GUI - Язык - Select English. Backup made on GM Triplex.
-
Another great work from BarviX. Respectable BarviX provided a new build for 7162 for testing.
For calm users. This test image support is not provided
Loading 2 minutes BOOT, LOAD +1 minute bootlogo, 5 minutes starting the system.
Restart GUI - 1 min 10 sec
Configs in / etc / tuxbox / config /.
For myself, I added HDD mount manager and Image Manager 2.5.5
Works fast, lots of space for plugins and skins. Heavy skins like Ekselancexe-BLACK-MONTANA work well.
-
still wifi not work can you help me to add
These drivers for the 7601 worked for me on Openvision.
how to add plz
How to add to the image: 1. Unpack, 2. Place the ipks one by one using DCC in the tmp folder, 3. Give the command in telnet: opkg install /tmp/*. ipk You can also use File Commander
thanks but not work and wifi device not appear in network only ethernet device
If you insert a Wi-Fi adapter on the 7601 chipset, everything will work. What adapter you have is a mystery.
-
still wifi not work can you help me to add
These drivers for the 7601 worked for me on Openvision.
how to add plz
How to add to the image: 1. Unpack, 2. Place the ipks one by one using DCC in the tmp folder, 3. Give the command in telnet: opkg install /tmp/*. ipk You can also use File Commander
-
still wifi not work can you help me to add
These drivers for the 7601 worked for me on Openvision.
-
Greetings Ahmed!
Replacing the zoneinfo folder with the usr/share path helped me with the time display. Now it shows my regional time correctly. Previously, under any settings, it showed only Greenwich.
Thank you for reminding me about "j00ztalator". I've had the program for a long time. But I forgot about it and loaded all the images first on a flash drive, and then in a multi-boot.
-
ahmed gazye
, I checked the r387 build from Ednaz. The standby problem is solved, works out of the box.
-
Ahmed Gazi, I wanted to test the open-vision-e2-extra language-py2-10.3-r386-spark7162 version, with new drivers, but the link is no longer working. Can you provide your version? If it's not too much trouble, of course.
-
Change the vdstandby on the /bin path, don't forget the 755 attributes
-
I checked version 382, everything is OK. Thanks to Ednaz and Persian Prince.
-
I checked the 381 version, also a cyclic rebut. Ednaz and Persian Prince may stop supporting 7162
