Try this image: https://images.openvision.dedy…ormuler3-20230531_usb.zip (name could be the same but e2 is different)
Ok try this one please: https://images.openvision.dedy…ormuler3-20230531_usb.zip
Posts by davinchi1975
-
-
Try this image: https://images.openvision.dedy…ormuler3-20230531_usb.zip (name could be the same but e2 is different)
-
-
-
-
Code
The image is loaded into the receiver, but Enigma does not start, it still stops at 49%. It used to hang on the screensaver - OpenVision and 49% - on the scoreboard, now there is no screensaver, the scoreboard reaches (loading) up to 49% and disappears ... The IP of the receiver is not defined in DCC. When manually prescribing - it does not connect. Basically, nothing has changed for the better.
-
Code
I am ready to be your tester and cooperate with you, since I have a Formuler F3 device and I would like to try the image of your team. Most of all I'm interested in images of py 3.11, and not the old ones - on py 2.7 ... Of course, I'm not a great specialist and not a programmer, so if I ask anything, but you tell me, please. Good luck!
-
work perfect
Did you test r535 from https://images.openvision.dedy…/Develop/Vision/Formuler/ ? And which image you tested formuler3 or formuler3ip?
CodeI tested both images, the result is the same - Enigma boots from a USB flash drive, but does not start, everything stops at 49%. OpenPLi, OpenATV, OpenSPA - loaded and started normally, without problems. OpenVision - does not start, freezes at 49% and therefore fails to use this image. You can Formuler F3 receiver - do not support, as it is ineffective ...
We don't have any formuler in our team so it's a blindspot for us but instead of giving up on it we could try to find the problem if you could provide us some logs: https://github.com/OpenVisionE…master/How-to-see-logs.md
-
work perfect
Did you test r535 from https://images.openvision.dedy…/Develop/Vision/Formuler/ ? And which image you tested formuler3 or formuler3ip?
CodeI tested both images, the result is the same - Enigma boots from a USB flash drive, but does not start, everything stops at 49%. OpenPLi, OpenATV, OpenSPA - loaded and started normally, without problems. OpenVision - does not start, freezes at 49% and therefore fails to use this image. You can Formuler F3 receiver - do not support, as it is ineffective ...
-
There is no alternative at this time, I searched and did not find anything similar, only everything I need in this app is only the softcam, as for other things, I carry everything alone
cfg_Zoom_-Final_FIX7x_all
-
-
-
-
1 вопрос:
мы можем использовать его с
Эдисион ос мини 4к??
-
-
-
-
-
work perfect
-