MultiStalkerPro 1.2 installed into the new OpenATV 7.5 Beta
cannot run due to : "Wrong ELF Classe" ( Muta@nt HD51 )
What's the use of installing an image that's not even in beta version but for testers only and then come and complain because something is not working? If you are a tester you should privately talk to coders or you will now incentivate people to go and look for that incomplete version.
Strange, my GTCombo doesn't have that reset button inside. Mine is probably an earlier version of it, I had it on 2021.
i added the info of where you have to short the motherboard to the first post HERE, i have not tried it myself, i have a button !!
that is from the freesat website, let us know how you get on
Thanks mate but I don't need it for now, I'm not going to flash MARS at the moment, I only use it for IPTV in a room where I don't have cabling, for the rest I prefer E2. I was just curious reading the thread and went to look for that button but found out it's not there. 
By the way, I tried to open the bottom hood for checking better and unscrewing the only two screaws at the bottom it just allows to lift the orange cover a bit but not completely. No other screws in sight.
Display More👌 Here is a corrected way to Fix Broken Device in Welcome :
1. Turn off the device.
2. Press and hold the button in the back of the device See Photo.
3. While holding the button, turn on the device.
4. Continue holding the button for approximately 5 seconds.
5. Release the button and wait for the device to turn on.
Strange, my GTCombo doesn't have that reset button inside. Mine is probably an earlier version of it, I had it on 2021. 
I tried as you explained, but it's still the same problem, it installs but the plugin doesn't appear in the menu. I also tried to extract and put the various folders and files in the right paths giving the attributes 755, but without success! Will my decoder be incompatible? Try with zgemma h5.2, openatv 7.4
Did you use the right one for the python of your image?
thanks for your help. Do you mean I do this procedure through Ajpanel ?
You can add portals through it's webif
"your device IP/multi-stalkerpro/portals"
Ajpanel is just another way to open portals but has nothing to do with MSP.
I'm sorry mate, I wrote in the wrong thread. 
I meant to write in the Artemis skin's one.
Thanks anyway for the code, I'll try it.
After updating OATV 7.4 the Wheather forecast is not working anymore on the top bar, probably due to a new python3 version.
Just updated and yes, the multiboot bug has been fixed but not the image install or restore to me, it still gives the same error as before and plus I have other two bugs with plugins missing or not functional but this would go off topic.
Display MoreI noticed this issue a few days ago after upgrading OpenATV-7.4, on different boxes.
Finally, this happens when there are extra slots on sd-card, hdd or usb.
If you disconnect the above and leave only the internal slots, Multiboot Manager works normally.
We are waiting for the new update to fix this problem.
Exactly, and I tell you more, if you start keeping pressed the front button during restart with the purpose of getting into the recovery menu if you have the SD card inserted, as you said, it goes to the UPdt state but doesn't go any further, if instead you remove the SD it moves to DECO and conseguently to the recovery screen as it should.
Once you are in the recovery menu if you insert the SD you then can go to the multiboot from there but it's limited to the first 10 slots.
If you have this reboot problem with OATV 7.4 I have again the same problem too and have already heard ATV coders and it's a image's issue, they are working on this too and they say it will be fixed in next update.
I had problems installing images on SF8008 Supreme from OpenATV 7.4 too, expecially backups. It appears to be a OATV's bug known to the developers. They're working on it as far as I know.
To me the solution has been to install from other images, try it untill they fix, it might work for you too.
About the slots on SSD it is a good idea but to me is not so convenient as I find it more confortable to use the same SD card on different similar decoders just by moving it from one to the other if needed.
20240621_012237.jpg
etc/wireguard/wg0.conf
Quindi posso sovrascrivere questo file?
Sovrascrivere no ma lo puoi copiare sul pc come backup della configurazione di base di wireguard dove comunque al suo interno troverai sempre le tue chiavi private da riportare nelle nuove eventuali installazioni.
_____________________________________________________
Not overwriting but you can copy it to your PC as a backup of wireguard basic configuration and in any case inside you will always find your private keys to bring back in new eventual installations.
E in quale modo eseguo il backup?
etc/wireguard/wg0.conf
Me again.
Solved with ATV and OBH I now have crashes with VIX 6.6.
It installed but if I open it there are no portals shown and it crashes with a black screen immediately resetting the box.
Here's the errors in the LOG.
Crash LOG extract.txt
EDIT: I know some errors refer to the skin but I already changed a few without benefits.
Just reporting not to bother anymore because I resolved my problem.
Don't ask me what changed because I have no idea and did again the same things I did before but I tried again to install via USB and this time it worked.
Thanks anyway balkanac .
Now I'll try with OBH that gave me the about same problem.
Try manuely do add plugin, via FTP connection
Already did. Via telnet, via USB, but it just doesn't install. Last thing I will try is to copy and paste the extention folder from another image and see what happens, in the meantime if there are other suggestions I will try them.
It's a Octagon Supreme and the image is ATV 7.3.
MultistalkerPro .ipk install only with this command:
opkg install --force-depends /tmp/*.ipk
Thanks. Just tried that but I still get the following:
root@sf8008:~# opkg install --force-depends /tmp/*.ipk
Installing python3-dateutil (2.8.2) on root.
Downloading https://feeds2.mynonpublic.com…ortexa15hf-neon-vfpv4/pyt hon3-dateutil_2.8.2-r0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-zoneinfo (3.11.2) on root.
Downloading https://feeds2.mynonpublic.com…ortexa15hf-neon-vfpv4/pyt hon3-zoneinfo_3.11.2-r0_cortexa15hf-neon-vfpv4.ipk.
Installing enigma2-plugin-extensions-multi-stalkerpro (1.2+git98+f8a2afa0+f8a2af acb3) on root.
* pkg_extract_data_file_names_to_stream: Failed to extract data.tar.* from pack age '/tmp/enigma2-plugin-extensions-multi-stalkerpro_1.2+git98+f8a2afa0+f8a2afac b3-r0_all.ipk'.
* pkg_get_installed_files: Error extracting file list from /tmp/enigma2-plugin- extensions-multi-stalkerpro_1.2+git98+f8a2afa0+f8a2afacb3-r0_all.ipk.
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-multi-s talkerpro.
Configuring python3-zoneinfo.
Configuring python3-dateutil.
I suspect I am missing an unpacker for extracting compressed files but have no idea how to fix that.
I am having problems installing on ATV 7.3 and also on other images but one thing at the time.
When I launch the file on post #21 of the download section it gives me this message:
21-06-2024 13-41-42.jpg
What's wrong with dependencies?
Any suggestions?
any idea as to why this is happening?
Did you install dependencies?
Reed post #1,230
About the skin if that's the problem I use Artemis and it's ok.
