Posts by murxer

  • VPN Manager bzw. OpenVPN startet nicht!

    Quote from .atari.

    Jain es gibt bei NordVPN, mullvad oder zb Ovpn keine resolv.conf oder man muss keine erstellen only .conf reicht da völlig aus und läuft ohne Probleme.

    Ja die läuft aber es besteht keine 100% VPN-Verbindung.


    Zum Thema DNS-Leak:
    Die beste VPN-Verbindung nützt nichts, wenn man trotz Aktivierung der VPN-Verbindung eine direkte DNS-Anfrage an den DNS des I-Net Providers oder gar Google macht.
    Hier mal ein kleiner Erklärungsversuch von NordVPN:


    Also immer eine VPN-Verbindung aufbauen wo auch die DNS Abfrage über den VPN-Provider läuft.

    Aber ja, es läuft auch ohne, aber warum nutzt man dann VPN ?

  • [Plugin] PlexDream-Server DreamOS-DEB

    PlexDreamServer Plugin


    PlexDream Server Plugin for Dreambox One, Two and 9xx.

    A Plex account is required.

    ff6b6c353e4a1e032d0d.png


    After the installation, the Plex server still needs to be installed.

    Use the blue button for this, the current version will then be offered.


    2d0c229e6a7c8ebd1843a3ed4.png

    After the installation, the Plex server still needs to be installed.

    Use the blue button for this, the current version will then be offered.


    Now you can install the offered version with OK.


    The server itself is installed in /data/PlexServer.

    Once you have installed the server and started it, you can set up the server.

    To do this, you must call up the following URL: http://IP.der.Dreambox:32400/web


    When uninstalling the plugin, all server data will also be deleted.


    If you use a One or Two, then transcoding works too, the 920 lacks power.

    For this I would advise you to outsource the transcoder folder to an HDD.

    You can find it in the settings:

    837b9224b8c0dd.png


    Installation for OE2.5 and OE2.6:

    To do this, my feed must be installed, if you haven't installed it yet, you can use the wget installer.

    wget http://plugins.boxpirates.dynvpn.de/boxpirates-feed-installer.sh -O - | /bin/sh -s with update

    Anyone who has installed PlexDream, EmbyDream, JellyfinDream or one of the VOD plugins is already using the current feed.


    Now you can install the plugin via the addon manager or enter the following in the terminal.

    apt-get update is only necessary if you are already using my feed.

    apt-get install enigma2-plugin-extensions-plexdreamserver

    apt-get -f install


    Plugin is still in beta status.


    In case of problems, please report.


    Have fun with it :smiling face:

  • [Plugin] EmbyDream-Server DreamOS-DEB

    EmbyDreamServer Plugin


    Emby server plugin for Dreambox One, Two and 9xx.

    a710de9b87edd11f03.png


    After the installation, the Emby server still needs to be installed.

    Use the blue button for this, the current stable version will then be offered.


    7059e2942685fa96c061e.png


    Now you can install the offered version with OK.


    The info button has 2 functions, when the Emby server is active you get information about the server.

    After starting the server, it can take 4 to 10 seconds for the information to be displayed.

    f453e1ab28aed17a.png


    If the Emby server is not active, you will get information about the plugin.


    e50be9d3.png


    The server itself is installed in /data/EmbyServer.

    All server data is also saved in this folder, you will find it in /data/EmbyServer/emby.

    So everything the Emby server needs is backed up in /data/EmbyServer.


    For transcoding, I outsourced the folder to the hdd.

    59adf1cfc912ba26c4.png


    The Emby server also includes a suitable ffmpeg version, so you don't have to worry about anything else.



    So you could use the server and then EmbyDream-DEB or EmbyDream-IPK as a client plugin

    Here is then used as IP 127.0.0.1 and select direct play in EmbyDream.


    Installation for OE2.5 and OE2.6:

    To do this, my feed must be installed, if you haven't installed it yet, you can use the wget installer.

    wget http://plugins.boxpirates.dynvpn.de/boxpirates-feed-installer.sh -O - | /bin/sh -s with update

    Anyone who has installed PlexDream, EmbyDream, JellyfinDream or one of the VOD plugins is already using the current feed.


    Now you can install the plugin via the addon manager or enter the following in the terminal.

    apt-get update is only necessary if you are already using my feed.

    apt-get install enigma2-plugin-extensions-embydreamserver

    apt-get -f install



    In case of problems, please report.


    Have fun with it :smiling face:

  • [Plugin] JellyfinDream-Server DreamOS-DEB

    JellyfinDreamServer Plugin


    Jellyfin server plugin for Dreambox One, Two and 9xx.

    c9e154c79710f9c8bed8.png


    After installation, the Jellyfin server still needs to be installed.

    Use the blue button for this, the current stable version will then be offered.


    552e65839f4fa9.png


    Now you can install the offered version with OK.


    182efc197a3a.png


    If you install an update for the Jellyfin Server, the old version will be saved as a backup, so you could go back one version in case there are problems with a new version.

    If there is a backup, the red button will be assigned the backup restore function


    The info button has 2 functions, when the Jellyfin server is active you get information about the server.

    After starting the server, it can take 4 to 10 seconds for the information to be displayed.


    1d64b112395d7b50b84a1cfae.png

    You will also see the URL here, which you then have to call up for configuration.

    http://IP-of-the-Dreambox:8096


    If the Jellyfin server is not active, you will receive information about the plugin.

    e6caf89cbb48a0e40476.png


    The server itself is installed in /data/jellyfin-server.

    If a backup is created then you will find another folder in /data called jellyfin-server_backup.

    When installing an update, your settings will be applied, nothing needs to be considered here.



    Attention:

    You have to make sure that you don't overfill your internal memory, I would advise you to outsource all data to a hard drive.

    I have set up the DM920 as a server and client for this purpose, you are welcome to do this, but you can also choose the folders freely:



    - Mounted a disk as /media/hdd

    - A folder created with /media/hdd/jellyfin

    - Created the following sub folders:

    1. /media/hdd/jellyfin/Jellyfin-data
    2. /media/hdd/jellyfin/Jellyfin-data/Cache
    3. media/hdd/jellyfin/Jellyfin-data/Metadata
    4. /media/hdd/jellyfin/transcodes



    In /media/hdd/jellyfin/Media here I created my movie folder and series folder.

    Now you can adjust the settings in the browser and all data will then be swapped out.


    6f3af52fb137f4a6c4da.png  aa1f8b683ed.png


    In /media/hdd/jellyfin/Media here I created my movie folder and series folder.

    Now you can adjust the settings in the browser and all data will then be swapped out.



    Now back to transcoding, it only works with a current ffmpeg version, there is currently no current version on the feeds. But the ffmpeg version is sufficient to be able to stream a live stream.

    As a test, I tested a current ffmpeg version on the 920 and Two.

    It works for both, but here you would have to increase the buffer a bit, otherwise there will be dropouts.

    But we actually only use a direct stream or a live stream, which works well with both boxes.


    So you could use the server and then EmbyDream-DEB or EmbyDream-IPK as a client plugin :)

    Here is then used as IP 127.0.0.1 and select direct play in EmbyDream.


    Installation for OE2.5 and OE2.6:

    For those who have already installed PlexDream or EmbyDream from the new feed via the wget installer,

    JellyfinDream should already appear in the add-on browser.

    If not, run an apt-get update from the console.


    The plugin can be installed with Installer (updateable ;)):

    wget http://plugins.boxpirates.dynvpn.de/jellyfindream-dreamos-installer.sh -O - | /bin/sh



    In case of problems, please report.


    Have fun with it :)

  • EmbyDream Client Plugin for images with Python2 and Python3

    An Emby or Jellyfin server must be available. As described in post 1.

    It is also possible to install a server on the DM Two, One and 9xx.

    Certainly it is also possible with other boxes, but you have to be careful here because of too little memory in the flash.


    """

    Es muss ein Emby oder Jellyfin Server vorhanden sein. Wie in Post 1 beschrieben. Es ist möglich auch einen Server auf der DM Two, One und 9xx zu installieren.

    Bestimmt geht es auch mit anderen Boxen aber hier muss man aufpassen wegen zu kleinem Speicher im Flash.

    """

  • [Plugin] PlexDream DreamOS-DEB

    PlexDream


    With Plex, you are choosing a modern home theater that plays back all the media content that you provide on your Plex Media Server on your Plex Client.

    Plex Media Server software is available as a free download for Windows, for Apple Mac, for Linux (Ubuntu, Fedora, CentOS), and for FreeBSD.

    The Plex server is the control center to which all your devices such as your smartphone, your SmartTV, your BlueRay player or your receiver connect.


    In order to be able to use the plugin, a Plex account must exist and a Plex server must be available.


    PlexDream Client Plugin for 7080, 9xx, One and Two supports films, series, pictures and music content.

    bac73836b.png  e516fd1c2458a87701f.png


    76d6bc293fe664c.png  6f705e096c.png


    2600b000244661188.png  a8b546d44852ab67cf27e0e52.png


    You can find detailed instructions here thx anz who created them.


    Another big thank you to the team for supporting this project.


    Installation for OE2.5 and OE2.6:

    The plugin can be installed with Installer (updateable ;)):

    wget http://plugins.boxpirates.dynvpn.de/plexdream-dreamos-installer.sh -O - | /bin/sh


    In case of problems, please report.


    Have fun with it :smiling face:

  • [Plugin] EmbyDream DreamOS-DEB

    Emby Dream


    It's never been easier to gather all your home videos, music and photos in one place.

    Your personal Emby server will automatically convert and stream your media to play on any device.


    To be able to use the plugin, an Emby server or Jellyfin server must be available.

    EmbyDream Client Plugin for 7080, 9xx, One and Two supports movies, series and music content.


    eba0d4.png  af80d2a337ed.png


    aca9deec8.png  449446ac4b.png


    17e138be7c8b41.png  e24d1a685c762ebb.png


    You can find detailed instructions here thx anz who created them.


    Another big thank you to the team for supporting this project.


    Installation for OE2.5 and OE2.6:

    For those who have already installed PlexDream from the new feed via the wget installer,

    EmbyDream should already appear in the add-on browser.

    If not, then times over console apt-get update carry out.


    The plugin can be installed with Installer (updateable ;)):

    wget http://plugins.boxpirates.to/embydream-dreamos-installer.sh -O - | /bin/sh


    What is currently not working:

    - Transcoding is not supported



    Just report any problems.


    Have fun with it :smiling face:

  • EmbyDream Client Plugin for images with Python2 and Python3

    Emby Dream


    It's never been easier to gather all your home videos, music and photos in one place.

    Your personal Emby server will automatically convert and stream your media to play on any device.


    To be able to use the plugin, an Emby server or Jellyfin server must be available.


    EmbyDream Client Plugin for armhf and mipsel OE2.0 images with Python2 and Python3.

    Films, series and music content are supported.


    9cc6b054.png  4464e165bef4948702ecd7.png


    d5df965bb6.png  3e237e83d07d549c57.png


    aee883df2bdf6a381.png  4811d1aa3942f2f599bf614.png


    You can find detailed instructions here thx anz who created them.


    Another big thank you to the team for supporting this project.


    To protect my work I decided to save the code.

    That's why there are several ipk files, here you have to pay attention to which processor is installed in your box,

    it also depends on which Python version is used in the image.

    So I ask you to pay attention to this.

    Nothing happens if you install a wrong version, but EmbyDream cannot be started.






    OpenPLI Images:

    enigma2-plugin-extensions-embydream_1.3.6_mips32el.ipk

    enigma2-plugin-extensions-embydream_1.3.6_cortexa15hf-neon-vfpv4.ipk

    enigma2-plugin-extensions-embydream_1.3.6_armv7vehf-neon-vfpv4.ipk

    enigma2-plugin-extensions-embydream_1.3.6_armv7ahf-neon.ipk


    VTI Images:

    enigma2-plugin-extensions-embydream_1.3.6_mips32el.ipk

    enigma2-plugin-extensions-embydream_1.3.6_armv7ahf-vfp-neon.ipk


    Images mit Python 2.7:

    enigma2-plugin-extensions-embydream_1.3.6_mips32el.ipk


    Images mit Python 3.11: for example OpenATV 7.3, NRF, OpenHDF

    enigma2-plugin-extensions-embydream_1.3.6+git47+879456e-r73_cortexa15hf-neon-vfpv4.ipk

    enigma2-plugin-extensions-embydream_1.3.6+git47+879456e-r73_mips32el.ipk

    enigma2-plugin-extensions-embydream_1.3.6+git47+879456e-r73_cortexa7hf-vfp.ipk


    Images mit Python 3.12: for example OpenATV 7.4, NRF, OpenHDF

    enigma2-plugin-extensions-embydream_1.3.6+git47+879456e0+879456e651-r74_mips32el.ipk

    enigma2-plugin-extensions-embydream_1.3.6+git47+879456e0+879456e651-r74_cortexa15hf-neon-vfpv4.ipk

    enigma2-plugin-extensions-embydream_1.3.6+git47+879456e0+879456e651-r74_cortexa7hf-vfp.ipk


    Installation:

    Packages depending on the processor and Python version, FTP to the box to /tmp

    Enter the following in Telnet or SSH:

    opkg update

    opkg install /tmp/*.ipk


    We will try to create additional packages for the individual images with different Python versions and processors.


    Just report any problems.


    What is currently not working:

    - Transcoding is not supported


    Have fun with it :smiling face:


    I hope there are no problems with the links :winking face: