Posts by leonlive

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    yes, this was a backup that I flashed with this errors.


    But by me is in a usr/keys.

    I already try it to put also in tuxbox, but, didn't work.

    So good i remmeber here was a big affari toput this to work good...

    maybe i should kill them with telnet and restart again oscam?

    Was something with init.so...

    in browser i try it all for him: 4000, 8000, 8888 but if they are not active...:)

    In menu from box give me a error - I have 3: card, info and some another. Card say that I'm not connected to internet :) another say something with pass.... :smiling face:

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    :smiling face with halo: My friend, YOU SAVE MY LIFE!

    YOU GOT A drink from me :beer1:

    Now, kann you please tell me how to restore my Blue button 'there was a plugin, somehow I doing mistake and now every time when want to see or start my plugin receiver crashed and say after 3 times REceiver will go and restart.

    Somehow i remmmmber in meantime when i try to uninstall kodi and some dvb 'this Error after that happpend.

    How to restore this ' was a oscam and cccam there.

    In root folder is a cccam, but oscam is gone.

    I try it to reinstall but don't work. same problem when i press this BLue button.

    How to do that to work again?

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    Thank you, I'm looked, but again and again:

    My receiver don't go in REcover/updated mode now!

    Procedure and all another stuff don't work.

    the only one that work is part time Telnet.

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    Quote from Alienato

    In don't think you have a special decoder just for yourself , you have been inundated with posts suggesting more or less the same procedure because that's the only one to recover your SF8008 4K UHD, now you ask if somebody has files from a quite old image (oATV 6.3 ) to give you, people using SF8008 keep updating it because this decoder is one of the best supported and think like I do that it isnt wise to stay with an old image, so will be very difficult for you to find what you're lookin for.

    :smiling face with halo:

    Thanks for replay, but if something work and is OK, why should be go in trouble?

    After all is a one stable 6.3 and work 2 much better than every new image of V7.

    Yes, Is old platform, kernel and so and so, but until is not resolved all problems from V7 and the some of version 7 will not go in table "Stable" I don't need this exeperiment for couple more cents of programs that I don't use.

    If I will use -then maybe I will go and do update.

    That's is the reason Why I still work with this image.

    But,

    If I will not go to do update via image link from openAtv - maybe I still have the worked Receiver. :smiling face with halo: Because I followed procedure from a Openatv:))


    After all, I'm here for a Help, and NOT to diskuss why I have this and that.

    Because is my wish.

    I read this lesson for a flash 10 years ago, so please don't link me to do a basic stuff - read carefully my first post.

    The flashing/updating method via Power button don't work now in my receiver.

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    Quote from System

    Have you already tried this procedure?

    Turn off the switch behind it and then turn it back on by holding down the power button in front of the decoder. At this point you should be in recovery mode and you can choose whether to boot another image from multiboot or install a new image online

    My first post began with info, that for me this procedure is no go!

    I mean, I can't go to update by pressing down the power button.

    THAT IS THE REASON OF MY POST!

    For that I try somebary with more knowledge here to give me short instruction how to - without update BASIC procedure or whatever simillar flash with buttons.

    This man should have a autoboot in root folder or simillar, or, replace the real command booting system to avoi Receiver boot from his flash - and use backuped in my hard disk image.

    That's all.

    otherwise, somebarry that have a OCTAGON openatv V 6.3 all python files in */user.../System.ryo folder that can give me this files.

    That's all folks!

    Thank you again for you efort :smiling face with halo: :)

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    Ok, but how to?

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    If you have whatever image that start automatic without to go somewhere, just start automatic repair, just sned me this.

    IF you know how to tell box to use my backuped image instead of his itself or somehow to put in automatic recovery without interuption, this will work.

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    THANK YOU, but this one don't work for me.

    Please, read my First post carefully :)

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    No! The receiver wont boot - they come to 100% and then down to 55 and 60 and so on without end! The Blue button don't work before either - some buck in plugins... theyfore i wanted clear install, but....become this booting problem.

    The BOX(receiver) don't go in flash mode upon pressed power button!

    IF this REcover image work automatically when i start - its ok, if I must press the button to go in flash modus - you can forget all this think!

    Because RECEIVER don"t just go in WhaTEVER UPDATE MODUS!

    bOX JUST STAY IN CIRLCE FROM 100 TO 60 AND AGIAN AND AGAIN. lOG FILE IS FROM TELNET!

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    where to put this image? in tmp???

    If you have one for this box dosen't matters what is there, I will do clean install after receiver start normally.

    Please describe and give me one of this.

    Many thanks!!!!

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    Quote from Hannibal_Lecter

    did you try other power supply

    Nope. I don't do that, because I never expereince this problem, and maybe, because I know that I did some wrong.

    Yes, It can be, but for sure more is Soft problem - I destruct base platform itself, after seeting down in the middle of the night and try to install in box a "working browser" with Kodi 18 and 19. After that some plugins just don't work, I try it remove and reinstall him - but I noticed the "booting time" don't go so quick like before. Than i know it it's time to clean install. 2 days after - I try to flash stable 6.3 latest from source with working menu..

    That"s happend - boot not any more.

    Thanks for efort too :)


    ******************* Important !!! *****************************

    I realy will be good if any tell me how to repair a start string in box that receiver directly use to flash my backuped file before that happend from my USB Hard disk (so good that is) without interruption receiver go and use them for repair all corupted files. In another siteIf someone have from this receiver original pythons files(pyo) that I can put in "Components"plugins, maybe is worth to try too :)

    ********************End of Important!!! **********************


    I will never flash again this box after that I repair now - I do this only that not works, because this box is used from my father -and he is blind. I make for him special menu that he follow for boot programs - DBV-T and Satellite plus some IPTV channels together, just simple, but that works 5 years without any sracth.

    Until 3 days before I put my hands in the midlle of the night.

    Thanks again.

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    Quote from urie
    Quote from leonlive

    I try it several times - with remote and button on the box direct, the box not react at my pressed buton. I try it with diferent usb, diferent size, diferent recovery image from source - 6.3 stable and latest 7.3. Not work.

    Capture.PNG

    Already know that - please, read my first post and answer - is not my first time that I Flashing. I do more: because of attached USB Hard Disk before, I used Him like a Backup.

    Quote from urie
    Quote from leonlive

    I try it several times - with remote and button on the box direct, the box not react at my pressed buton. I try it with diferent usb, diferent size, diferent recovery image from source - 6.3 stable and latest 7.3. Not work.

    Capture.PNG

    More helpfull will be, when somebarry tell me where I can put a string to know this box to START read directly my BACKUPED Image before this happend!

    This will be more helpfull.

    Thanks for efort too. :)

  • Octagon Sf8008 4K UHD box with OpenATV-7.3 installed boot problem

    Quote from Captain

    boot to recovery menu and flash any new image to any free slot , now you can copy the files to your broken image

    Hello there:

    Because i have seen simillar treads I see no point to open a new one.


    What if I can't boot to any menu:

    --> clicking on the button "Standby" give no result: The box don't go in any modus for flashing:

    Box is loading up to 100%: then image "Openatv 6.3" appear and then disapear - box go down to 50% for a second, than up to 100% again - and cicled without no end.

    I able to go with DCC and show the tmp.log also do some command via telnet.

    I have before backuped the box, but don't know how and where to put a command to activate "restoring modus" .

    I not sure that also will work, because when receiver cicled, the connection with telnet sometimes is lost.

    Any help will be nice, because I'm running out of time here.

    Best regards....

    Info about image:

    OEVersion: OE-Alliance 4.3

    Enigmaversion: 2019-01-04

    Distroversion: openatv

    Imageversion: 6.3.0

    Driverdate: 20181224

    Webifversion: OWIF 1.3.5

    FPversion: 0

    Devicename: SF8008 4K UHDenigma2_crash_1704144301.logenigma2_crash_1704144301.log

  • openpli-7.2-dm500hd-sim-2.10-20191226

    Hi, there.

    I like the idea -almost done, special with boot logo :)

    I will to ask you if you can give me the source of them - I just want to cut off unnecessary files for me and from library - want to use just simple way without "youtube" plugin and "pannels".

    I can't shake him because give me error if I try to reinstall him.

    Seams some bug when I try to install manually -don'T accept at all VPN or crash.

    Except that I want to implement one application apk - or one alternative simple browser

    If you can help me With pleasure I will do my best :)

    Regards... :):GoodMorning: