Posts by Mahmoud Hussein

I think the simple way to try another skin and perform the same sequence if the same crash happens, means the problem is not related to algare

it is between the image and AJPANEL

Quote from Lululla

I threw the crash to the chat ;) I didn't tell him to mention anything else

This is "his answer"

And just to clarify

Yes, it is clear already but the point is, should we report this in AjPanel support thread or wait for further information to help odem2014.

Quote from Lululla

From I.A. notes (chatGPT)

Quote

The error log you provided indicates a segmentation fault that occurred in Enigma2, with some key issues in the skin processing and a fatal signal leading to a crash.

Here are the main points of interest from the log:

1. TypeError in isinstance(): The error isinstance() arg 2 must be a type, a tuple of types, or a union suggests that somewhere in your skin processing, an invalid type is being passed to isinstance(). The second argument of isinstance() must be a type, a tuple of types, or a union, and the error shows that something else was passed.
2. Segmentation Fault (Signal 23): The segmentation fault happens after this error. A segmentation fault typically occurs due to invalid memory access, such as accessing a memory location that the program is not allowed to read or write. In this case, it's happening within the Enigma2 process.

Troubleshooting Steps:

1. Check Skin File:
2. Skin Widget Types:
3. Check for Memory Access Issues:
4. Revert to Default Skin:
5. Debugging Enigma2:

• Review the skin file for any issues, particularly around widget definitions or custom classes that could be causing the invalid type to be passed to isinstance().
• The error indicates this is happening within the processWidget, processPanel, or processScreen functions, so it's likely tied to the skin processing code in that area.

• Ensure that all widgets in your skin files are correctly defined. If you're using custom widgets or extensions, verify that they are being passed to isinstance() correctly (i.e., making sure the second argument is a valid type or tuple).

• The segmentation fault (Fault Address: 00000094) could be due to invalid memory access when Enigma2 tries to read the skin or load some components. It's worth checking if there are any incorrect memory references in your code or skin files.

• If this issue started after modifying the skin, try reverting to the default skin to see if the problem persists. If the default skin works, it confirms the issue is within your custom skin.

• You can increase the Enigma2 debug level and check logs more thoroughly to see if there's a more specific cause of the segmentation fault that can give you clues about where to focus.

Is the skin mentioned here refer to algare or skin of AjPanel itself, as far as I know, there are no screens related to AjPanel in algare skin.

Plus all actions prior crash done on AjPanel not the skin itself,

Just my point of view

Very Nice image foxbob

Really great work, just kind reminder about two points

1. Network services menu

2. Numbers and icons in the main menu

Regards

screenshot_HBO-HD_20250116_033305.png screenshot_Dubai-One-HD_20250116_033149.png

screenshot_Dubai-One-HD_20250116_033213.png screenshot_HBO-HD_20250116_033317.png

screenshot_HBO-HD_20250116_033251.png screenshot_HBO-HD_20250116_033346.png

screenshot_HBO-HD_20250116_033405.png screenshot_HBO-HD_20250116_033526.png

screenshot_HBO-HD_20250116_033844.png screenshot_HBO-HD_20250116_034028.png

screenshot_Filmbox-Arthouse_20250116_034228.png screenshot_HBO-HD_20250116_034459.png

screenshot_HBO-HD_20250116_034602.png

Previously I wrote a suggestion to add some kind of tunning or filters option to standardize the epg data prior import it to epg.dat,

The idea was importing data in uniform way so xtraevent and posterx renderers can check it fast with effective way

This was old suggestion before the improvement done by lululla. But maybe someone cares

Quote from Lululla

i fixed
-import sources from git
-major code

Try and report

wget -q "--no-check-certificate" https://raw.githubusercontent.com/Belfagor2005/EPGImport-99/main/installer.sh -O - | /bin/bash

Is this fix include the selection boxes?

Quote from montilla

AI subtitle support plugin not working in 7.5.1

1_0_19_72_C_A_E080000_0_0_0_20250106172618.jpg

I think this error due to lake of used font for translation language letter try to rest your used font with AjPanel

Quote from foxbob

Quote from Mahmoud Hussein

I still working with the release of 1st of January 25, it is working very good for me, so I did not test the next releases,

But just reminder about my previous request to add support for menu list to numbers and icons,

Moreover, I will be good to add section for network services such as ftp, samba...etc, from it, user can install /activate the service.

Appreciate your efforts and time

Regards

Display More

OpenPlI most likely doesn't have this. Where is it? I'll think about the second question. I don't have time yet.

Display More

Currently no pli based system implement it by default, some trials by some skinners such as darkos and ozata but not standard solution.

Anyway, it will be nice if there are option to add it, there are a lot of good functions imported in this image already.

Thanks

I still working with the release of 1st of January 25, it is working very good for me, so I did not test the next releases,

But just reminder about my previous request to add support for menu list to numbers and icons,

Moreover, I will be good to add section for network services such as ftp, samba...etc, from it, user can install /activate the service.

Appreciate your efforts and time

Regards

Quote from ahmed gazye

our brother Mahmoud Hussein thanks To develop xdreamy

1_0_19_3DD8_640_13E_820000_0_0_0_20250105112000.jpg

1_0_19_3DD8_640_13E_820000_0_0_0_20250105111931.jpg

But I think so Channels List In this situation it is more beautiful

1_0_19_3DD8_640_13E_820000_0_0_0_20250105111909.jpg

Display More

If you refer to the height of raw in the channels list, you can increase it from the channels list settings by reducing the number of channels per list

Channels List Grid System work good
Logo for XDREAMY (Till Have official logo)

screenshot_HBO-HD_20250105_085245.png screenshot_Karameesh-TV_20250105_105903.png

screenshot_Karameesh-TV_20250105_105917.png screenshot_Majd-Kids-TV-HD_20250105_110236.png

Quote from cologno49

I thought you had solved the OSD calibration but I was wrong everything is as before, but is it really that difficult to fix it?

on my box SF8008, I do not have a problem with OSD Calibration, it works fine and appears normally, can you explain your point more, some screenshots will be much better, maybe we can help you.

screenshot_MBC-2_20250102_020224.png

I don't know if this is a private case or not, but I can not see the source selection sign, normally it is visible to select the sources you want to pick up your data from it, but on two PIL images I have no selection sign in the sources list!

screenshot_--------------------_-------------------_-Bob-Alphabet-Adventure-_-Bob-The-Train-Arabic-720P_HD-.mp4_20250104_161157.png

Quote from odem2014

Quote from Mahmoud Hussein

Quote from levi45

levi45 added a new version:

File

OpenTR Py3 Image 12.0 R1

OpenTR image v 12.0 R1

Custom Build from OpenPLI develop git

Many thanks

@lululla for all the hard work

oktus for the design

odem2014 for aglare skin.

and thanks to everyone that any files used on this image.

We are not responsible if any damage done to your stb by this image, please only use this image with your own risk.

1.jpg

1.jpg2.jpg3.jpg4.jpg5.jpg6.jpg9.jpg



OpenTR Image 12.0 r1 Edision Download

OpenTR Image 12.0 r1 Gigablue Download

OpenTR Image 12.0 r1 maxytec Download

OpenTR Image 12.0 r1 Mutant…

levi45

Jan 2nd 2025

Quote

OpenTR image v 12.0 R1

Custom Build from OpenPLI develop git

Many thanks

@lululla for all the hard work

oktus for the design

odem2014 for aglare skin.

and thanks to everyone that any files used on this image.

We are not responsible if any damage done to your stb by this image, please only use this image with your own risk.

1.jpg2.jpg3.jpg4.jpg5.jpg6.jpg9.jpg

OpenTR Image 12.0 r1 Edision Download

OpenTR Image 12.0 r1 Gigablue Download

OpenTR Image 12.0 r1 maxytec Download

OpenTR Image 12.0 r1 Mutant Download

OpenTR Image 12.0 r1 Octagon Download

OpenTR Image 12.0 r1 Pulse Download

OpenTR Image 12.0 r1 Qviart Download

OpenTR Image 12.0 r1 Uclan Download

OpenTR Image 12.0 r1 Vuplus Download

OpenTR Image 12.0 r1 Zgemma Download

Display More

Display More

Thanks Levi45 for sharing, just few points,

On sf8008 there are video blinking with each button click, even with change skin or resolution.

Movieplayer list needs some adjustments to display titles in properway

Spinner behavior somehow strange it getting bigger /smaller in irregularities, something like multiple resultions during boot process.

Addons feed has old version of many stuff, please refresh it.

Thanks for sharing

Regards

Display More

Blinking is found in all openpli based images for sf8008 , I have no explanation for that .

Display More

Recently I have a chance to test another image based on pli 3.13 and it working good, also the official image working fine,

The built in algare version is 4.6 while last version is 4.9, Moreover the grid plugin browser needs some adjustments for plugins name arrange it should be center wrap not right

For over 5 years of my experience with enigma2 images, I never use pli base image over 3 to 6 hours and switch back to OE images especially openatv or opendroid but now I have to say, I enjoyed a lot with your last image update and it working very good, thanks for your efforts.

It will be nice to add number, icons short cut to menu lists,

Regards

Quote from levi45

levi45 added a new version:

File

OpenTR Py3 Image 12.0 R1

OpenTR image v 12.0 R1

Custom Build from OpenPLI develop git

Many thanks

@lululla for all the hard work

oktus for the design

odem2014 for aglare skin.

and thanks to everyone that any files used on this image.

We are not responsible if any damage done to your stb by this image, please only use this image with your own risk.

1.jpg

1.jpg2.jpg3.jpg4.jpg5.jpg6.jpg9.jpg



OpenTR Image 12.0 r1 Edision Download

OpenTR Image 12.0 r1 Gigablue Download

OpenTR Image 12.0 r1 maxytec Download

OpenTR Image 12.0 r1 Mutant…

levi45

Jan 2nd 2025

Quote

OpenTR image v 12.0 R1

Custom Build from OpenPLI develop git

Many thanks

@lululla for all the hard work

oktus for the design

odem2014 for aglare skin.

and thanks to everyone that any files used on this image.

We are not responsible if any damage done to your stb by this image, please only use this image with your own risk.

1.jpg2.jpg3.jpg4.jpg5.jpg6.jpg9.jpg

OpenTR Image 12.0 r1 Edision Download

OpenTR Image 12.0 r1 Gigablue Download

OpenTR Image 12.0 r1 maxytec Download

OpenTR Image 12.0 r1 Mutant Download

OpenTR Image 12.0 r1 Octagon Download

OpenTR Image 12.0 r1 Pulse Download

OpenTR Image 12.0 r1 Qviart Download

OpenTR Image 12.0 r1 Uclan Download

OpenTR Image 12.0 r1 Vuplus Download

OpenTR Image 12.0 r1 Zgemma Download

Display More

Display More

Thanks Levi45 for sharing, just few points,

On sf8008 there are video blinking with each button click, even with change skin or resolution.

Movieplayer list needs some adjustments to display titles in properway

Spinner behavior somehow strange it getting bigger /smaller in irregularities, something like multiple resultions during boot process.

Addons feed has old version of many stuff, please refresh it.

Thanks for sharing

Regards

I have sf8008, when I rebooted to recovery it display only 10 slots, I already have more, any updates to fix this?

I have startup files up to 52 but this was not the solution, any suggestions?

Quote from turan45

Quote from Mahmoud Hussein

I think this image deserve a private slogan to be branded, so after Ahmed permission, I would like to suggest some examples from my point of view, if foxbob agree, we can use it as image icon,

My personal choice

I would appreciate it if you could explain where to open this file. Regards.

In some skins such as XDREAMY or algare there is a place to display the logo or slogan of the image repeated in the entire menu screens, as per example below,

The reason of it to identify the working image without asking the user plus it is ornament element.

screenshot_Sky-Atlantic_20241231_192258.png

FB_IMG_1731415196585.jpgscreenshot_Sky-Cinema-Family_20241125_082343.png.jpg

Quote from kalkan99

online update

02.01.2025

v-24.0

'-Update Some minor errors by Saiedf'.

thanks by zıko

Display More

Is it work with the new python version 3.12.8 or 3.13,

I think the installation script is not match with both.

I think this image deserve a private slogan to be branded, so after Ahmed permission, I would like to suggest some examples from my point of view, if foxbob agree, we can use it as image icon,

My personal choice