Thank you so much guy's..... It wasn't work with all those thing's.
I'm going to send it to the main company which is
Dream Property GmbH
Pierbusch 30
44536 Lunen
Germany
Posts by DreamboxDM9204K
-
-
I'll tried this way also
downloaded zImage-rescue-3.14-r0-dm900-20180425.bin and transfer to fat32 1gb usb stick and I put it behind receiver and opened Putty and give this code
flash-rescue /tmp/*.bin
but showing '' CA '' Problem.
-
Display More
Connect Telnet over Putty and Try
fdisk -lu /dev/mmcblk0
blkid|grep mmcblk0
Write the Output here
I Seen this kind of Failure once with Message
CodeFatal: Target device '/dev/mmcblk0p2' is not writableand it was a Corrupted Partition on Box
If The Output Looks like
Code
Display Moreroot@dm920:~# fdisk -lu /dev/mmcblk0 Disk /dev/mmcblk0: 7818 MB, 7818182656 bytes 4 heads, 16 sectors/track, 238592 cylinders, total 15269888 sectors Units = sectors of 1 * 512 = 512 bytes Disk /dev/mmcblk0 doesn't contain a valid partition table root@dm920:~# blkid|grep mmcblk0Otherwise the Good Partition Looks like
Code
Display Moreroot@dm900:~# fdisk -lu /dev/mmcblk0 Found valid GPT with protective MBR; using GPT Disk /dev/mmcblk0: 7634944 sectors, 3728M Logical sector size: 512 Disk identifier (GUID): 4956757f-9fcb-4b4a-b80a-6e8a893f22df Partition table holds up to 128 entries First usable sector is 34, last usable sector is 7634910 Number Start (sector) End (sector) Size Code Name 1 2048 65535 31.0M 0700 kernel 2 65536 2097151 992M 0700 rootfs 3 2097152 7634910 2703M 0700 data root@dm900:~#There is Only Experimental Way to get your Box again to work
you have to Create Partition before you will be able to Flash new Image on it
How did you Damanaged your Partition does it Crashed before you Tried to Put new Image on Box ???
More Questions did you Installed before the VCP Drivers for Dream ??? Serial Connect
https://www.silabs.com/develop…vcp-drivers?tab=downloads
Then you Will be Able to make Bootlog
If in Bootlog you see
CodeDDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000 OK DDR1: =@ ffe0e780 <= ffe0df10 MEMSYS-1 @ f1180000 MEMSYS ERROR: 00000001Then your Memory is Corrupted
But i still Asume you just Crashed your Partition
You Can Recover it at your own Risk over Telnet with
Codesgdisk /dev/mmcblk0 -z -n 1:2048:65535 -c 1:kernel -t 1:8301 -n 2:65536:4194303 -c 2:rootfs -t 2:8307 -n 3:4194304: -c 3:data -t 3:8300Use this with Care and Try After that
Use some more times
Codefdisk -lu / dev / mmcblk0till you see Partitions are Ok
Load a new Image with Rescue Loader on Box after you see a Partition is Ok and Box will be like Before
With some Risk you will get it Alive again
This is all what I've done with PuTTY.
Password:
Code
Display MoreLogin incorrect dm900 login: root login[388]: root login on 'ttyS0' root@dm900:~# help Built-in commands: ------------------ . : [ [[ alias bg break cd chdir continue echo eval exec exit export false fg getopts hash help history jobs kill let local printf pwd read readonly return set shift source test times trap true type ulimit umask unalias unset wait root@dm900:~# root@dm900:~# fdisk -lu /dev/mmcblk0 [ 1354.497111] mmc1: Timeout waiting for hardware interrupt. [ 1354.499751] ------------[ cut here ]------------ [ 1354.500294] WARNING: CPU: 1 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-gli bc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_comma nd+0x658/0xeb4() [ 1354.502061] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1354.502785] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P W O 3.14-1.17-dm 900 #2 [ 1354.503675] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x1 0/0x14) [ 1354.504569] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c ) [ 1354.505402] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common +0x6c/0x88) [ 1354.506331] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowp ath_null+0x1c/0x24) [ 1354.507339] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_c ommand+0x658/0xeb4) [ 1354.508349] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeou t_timer+0x74/0xb8) [ 1354.509348] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_ fn+0x24/0x84) [ 1354.510297] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq +0x19c/0x218) [ 1354.511247] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+ 0x134/0x248) [ 1354.512186] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc ) [ 1354.513018] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1354.513828] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/ 0x5c) [ 1354.514698] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0 x50) [ 1354.515554] Exception stack(0xcd8cbfa0 to 0xcd8cbfe8) [ 1354.516135] bfa0: ffffffed 0d0e8000 c0eed4c8 00000000 cd8ca030 c0eec420 c0eec 49c c05d788c [ 1354.517072] bfc0: c0f19961 c0f19961 cd8ca000 00000000 00000000 cd8cbfe8 c000e fb0 c000efa8 [ 1354.518007] bfe0: 60070013 ffffffff [ 1354.518414] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x 38) [ 1354.519265] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry +0x100/0x144) [ 1354.520215] [<c00638f8>] (cpu_startup_entry) from [<00008664>] (0x8664) [ 1354.520973] ---[ end trace 7ed3597eb69b4f60 ]--- [ 1354.525568] mmcblk0: error -110 sending status command, retrying [ 1354.528288] mmcblk0: error -110 sending status command, retrying [ 1354.530998] mmcblk0: error -110 sending status command, aborting [ 1354.531699] end_request: I/O error, dev mmcblk0, sector 0 [ 1354.532329] Buffer I/O error on device mmcblk0, logical block 0 [ 1354.533018] end_request: I/O error, dev mmcblk0, sector 8 [ 1354.533647] Buffer I/O error on device mmcblk0, logical block 1 [ 1354.534337] end_request: I/O error, dev mmcblk0, sector 16 [ 1354.534967] Buffer I/O error on device mmcblk0, logical block 2 [ 1354.535654] end_request: I/O error, dev mmcblk0, sector 24 [ 1354.536289] Buffer I/O error on device mmcblk0, logical block 3 [ 1364.545109] mmc1: Timeout waiting for hardware interrupt. [ 1364.547741] ------------[ cut here ]------------ [ 1364.548279] WARNING: CPU: 1 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-gli bc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_comma nd+0x658/0xeb4() [ 1364.550044] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1364.550766] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P W O 3.14-1.17-dm 900 #2 [ 1364.551651] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x1 0/0x14) [ 1364.552544] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c ) [ 1364.553374] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common +0x6c/0x88) [ 1364.554302] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowp ath_null+0x1c/0x24) [ 1364.555310] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_c ommand+0x658/0xeb4) [ 1364.556318] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeou t_timer+0x74/0xb8) [ 1364.557316] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_ fn+0x24/0x84) [ 1364.558264] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq +0x19c/0x218) [ 1364.559213] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+ 0x134/0x248) [ 1364.560153] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc ) [ 1364.560983] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1364.561793] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/ 0x5c) [ 1364.562663] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0 x50) [ 1364.563519] Exception stack(0xcd8cbfa0 to 0xcd8cbfe8) [ 1364.564100] bfa0: ffffffed 0d0e8000 c0eed4c8 00000000 cd8ca030 c0eec420 c0eec 49c c05d788c [ 1364.565037] bfc0: c0f19961 c0f19961 cd8ca000 00000000 00000000 cd8cbfe8 c000e fb0 c000efa8 [ 1364.565971] bfe0: 60070013 ffffffff [ 1364.566378] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x 38) [ 1364.567228] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry +0x100/0x144) [ 1364.568175] [<c00638f8>] (cpu_startup_entry) from [<00008664>] (0x8664) [ 1364.568932] ---[ end trace 7ed3597eb69b4f61 ]--- [ 1364.573513] mmcblk0: error -110 sending status command, retrying [ 1364.576231] mmcblk0: error -110 sending status command, retrying [ 1364.578964] mmcblk0: error -110 sending status command, aborting [ 1364.579665] end_request: I/O error, dev mmcblk0, sector 0 [ 1364.580293] Buffer I/O error on device mmcblk0, logical block 0 fdisk: can't open '/dev/mmcblk0': Input/output error root@dm900:~# blkid|grep mmcblk0 [ 1394.529111] mmc1: Timeout waiting for hardware interrupt. [ 1394.531749] ------------[ cut here ]------------ [ 1394.532291] WARNING: CPU: 1 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-gli bc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_comma nd+0x658/0xeb4() [ 1394.534058] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1394.534784] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P W O 3.14-1.17-dm 900 #2 [ 1394.535675] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x1 0/0x14) [ 1394.536569] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c ) [ 1394.537402] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common +0x6c/0x88) [ 1394.538332] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowp ath_null+0x1c/0x24) [ 1394.539340] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_c ommand+0x658/0xeb4) [ 1394.540350] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeou t_timer+0x74/0xb8) [ 1394.541349] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_ fn+0x24/0x84) [ 1394.542298] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq +0x19c/0x218) [ 1394.543248] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+ 0x134/0x248) [ 1394.544187] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc ) [ 1394.545019] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1394.545829] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/ 0x5c) [ 1394.546698] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0 x50) [ 1394.547556] Exception stack(0xcd8cbfa0 to 0xcd8cbfe8) [ 1394.548138] bfa0: ffffffed 0d0e8000 c0eed4c8 00000000 cd8ca030 c0eec420 c0eec 49c c05d788c [ 1394.549075] bfc0: c0f19961 c0f19961 cd8ca000 00000000 00000000 cd8cbfe8 c000e fb0 c000efa8 [ 1394.550011] bfe0: 60070013 ffffffff [ 1394.550417] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x 38) [ 1394.551269] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry +0x100/0x144) [ 1394.552218] [<c00638f8>] (cpu_startup_entry) from [<00008664>] (0x8664) [ 1394.552977] ---[ end trace 7ed3597eb69b4f62 ]--- [ 1394.557597] mmcblk0: error -110 sending status command, retrying [ 1394.560330] mmcblk0: error -110 sending status command, retrying [ 1394.563040] mmcblk0: error -110 sending status command, aborting [ 1394.563740] end_request: I/O error, dev mmcblk0, sector 7634816 [ 1394.564430] Buffer I/O error on device mmcblk0, logical block 954352 [ 1404.577109] mmc1: Timeout waiting for hardware interrupt. [ 1404.579740] ------------[ cut here ]------------ [ 1404.580278] WARNING: CPU: 1 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-gli bc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_comma nd+0x658/0xeb4() [ 1404.582044] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1404.582765] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P W O 3.14-1.17-dm 900 #2 [ 1404.583650] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x1 0/0x14) [ 1404.584542] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c ) [ 1404.585373] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common +0x6c/0x88) [ 1404.586302] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowp ath_null+0x1c/0x24) [ 1404.587308] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_c ommand+0x658/0xeb4) [ 1404.588316] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeou t_timer+0x74/0xb8) [ 1404.589315] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_ fn+0x24/0x84) [ 1404.590263] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq +0x19c/0x218) [ 1404.591213] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+ 0x134/0x248) [ 1404.592153] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc ) [ 1404.592983] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1404.593793] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/ 0x5c) [ 1404.594663] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0 x50) [ 1404.595520] Exception stack(0xcd8cbfa0 to 0xcd8cbfe8) [ 1404.596101] bfa0: ffffffed 0d0e8000 c0eed4c8 00000000 cd8ca030 c0eec420 c0eec 49c c05d788c [ 1404.597038] bfc0: c0f19961 c0f19961 cd8ca000 00000000 00000000 cd8cbfe8 c000e fb0 c000efa8 [ 1404.597973] bfe0: 60070013 ffffffff [ 1404.598380] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x 38) [ 1404.599230] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry +0x100/0x144) [ 1404.600179] [<c00638f8>] (cpu_startup_entry) from [<00008664>] (0x8664) [ 1404.600936] ---[ end trace 7ed3597eb69b4f63 ]--- [ 1404.605532] mmcblk0: error -110 sending status command, retrying [ 1404.608250] mmcblk0: error -110 sending status command, retrying [ 1404.610959] mmcblk0: error -110 sending status command, aborting [ 1404.611657] end_request: I/O error, dev mmcblk0, sector 7634816 [ 1404.612344] Buffer I/O error on device mmcblk0, logical block 954352 [ 1404.621570] end_request: I/O error, dev mmcblk0boot1, sector 8064 [ 1404.622281] Buffer I/O error on device mmcblk0boot1, logical block 1008 [ 1404.639250] end_request: I/O error, dev mmcblk0boot1, sector 8064 [ 1404.639950] Buffer I/O error on device mmcblk0boot1, logical block 1008 [ 1404.656934] end_request: I/O error, dev mmcblk0boot0, sector 8064 [ 1404.657645] Buffer I/O error on device mmcblk0boot0, logical block 1008 [ 1404.674601] end_request: I/O error, dev mmcblk0boot0, sector 8064 [ 1404.675309] Buffer I/O error on device mmcblk0boot0, logical block 1008 root@dm900:~# sgdisk /dev/mmcblk0 -z -n 1:2048:65535 -c 1:kernel -t 1:8301 -n 2: 65536:4194303 -c 2:rootfs -t 2:8307 -n 3:4194304: -c 3:data -t 3:8300 [ 1699.809109] mmc1: Timeout waiting for hardware interrupt. [ 1699.811750] ------------[ cut here ]------------ [ 1699.812294] WARNING: CPU: 1 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-glibc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x658/0xeb4() [ 1699.814060] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1699.814785] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P W O 3.14-1.17-dm900 #2 [ 1699.815675] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x10/0x14) [ 1699.816570] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c) [ 1699.817404] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common+0x6c/0x88) [ 1699.818334] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowpath_null+0x1c/0x24) [ 1699.819342] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_command+0x658/0xeb4) [ 1699.820351] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeout_timer+0x74/0xb8) [ 1699.821351] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_fn+0x24/0x84) [ 1699.822300] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq+0x19c/0x218) [ 1699.823250] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+0x134/0x248) [ 1699.824188] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc) [ 1699.825019] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1699.825829] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/0x5c) [ 1699.826697] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0x50) [ 1699.827555] Exception stack(0xcd8cbfa0 to 0xcd8cbfe8) [ 1699.828136] bfa0: ffffffed 0d0e8000 c0eed4c8 00000000 cd8ca030 c0eec420 c0eec49c c05d788c [ 1699.829073] bfc0: c0f19961 c0f19961 cd8ca000 00000000 00000000 cd8cbfe8 c000efb0 c000efa8 [ 1699.830008] bfe0: 60070013 ffffffff [ 1699.830415] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x38) [ 1699.831267] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry+0x100/0x144) [ 1699.832217] [<c00638f8>] (cpu_startup_entry) from [<00008664>] (0x8664) [ 1699.832976] ---[ end trace 7ed3597eb69b4f64 ]--- [ 1699.837569] mmcblk0: error -110 sending status command, retrying [ 1699.840289] mmcblk0: error -110 sending status command, retrying [ 1699.842998] mmcblk0: error -110 sending status command, aborting [ 1699.843698] end_request: I/O error, dev mmcblk0, sector 0 [ 1699.844329] Buffer I/O error on device mmcblk0, logical block 0 [ 1699.845018] end_request: I/O error, dev mmcblk0, sector 8 [ 1699.845646] Buffer I/O error on device mmcblk0, logical block 1 [ 1699.846338] end_request: I/O error, dev mmcblk0, sector 16 [ 1699.846968] Buffer I/O error on device mmcblk0, logical block 2 [ 1699.847654] end_request: I/O error, dev mmcblk0, sector 24 [ 1699.848289] Buffer I/O error on device mmcblk0, logical block 3 [ 1709.857109] mmc1: Timeout waiting for hardware interrupt. [ 1709.859740] ------------[ cut here ]------------ [ 1709.860277] WARNING: CPU: 1 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-glibc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x658/0xeb4() [ 1709.862043] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1709.862763] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P W O 3.14-1.17-dm900 #2 [ 1709.863647] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x10/0x14) [ 1709.864539] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c) [ 1709.865370] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common+0x6c/0x88) [ 1709.866299] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowpath_null+0x1c/0x24) [ 1709.867307] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_command+0x658/0xeb4) [ 1709.868314] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeout_timer+0x74/0xb8) [ 1709.869313] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_fn+0x24/0x84) [ 1709.870262] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq+0x19c/0x218) [ 1709.871211] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+0x134/0x248) [ 1709.872150] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc) [ 1709.872981] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1709.873791] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/0x5c) [ 1709.874660] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0x50) [ 1709.875517] Exception stack(0xcd8cbfa0 to 0xcd8cbfe8) [ 1709.876098] bfa0: ffffffed 0d0e8000 c0eed4c8 00000000 cd8ca030 c0eec420 c0eec49c c05d788c [ 1709.877034] bfc0: c0f19961 c0f19961 cd8ca000 00000000 00000000 cd8cbfe8 c000efb0 c000efa8 [ 1709.877969] bfe0: 60070013 ffffffff [ 1709.878375] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x38) [ 1709.879227] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry+0x100/0x144) [ 1709.880175] [<c00638f8>] (cpu_startup_entry) from [<00008664>] (0x8664) [ 1709.880934] ---[ end trace 7ed3597eb69b4f65 ]--- [ 1709.885513] mmcblk0: error -110 sending status command, retrying [ 1709.888230] mmcblk0: error -110 sending status command, retrying [ 1709.890964] mmcblk0: error -110 sending status command, aborting [ 1709.891665] end_request: I/O error, dev mmcblk0, sector 0 [ 1709.892293] Buffer I/O error on device mmcblk0, logical block 0 [ 1719.905107] mmc1: Timeout waiting for hardware interrupt. [ 1719.907737] ------------[ cut here ]------------ [ 1719.908275] WARNING: CPU: 0 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-glibc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x658/0xeb4() [ 1719.910040] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1719.910764] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P W O 3.14-1.17-dm900 #2 [ 1719.911649] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x10/0x14) [ 1719.912539] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c) [ 1719.913371] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common+0x6c/0x88) [ 1719.914300] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowpath_null+0x1c/0x24) [ 1719.915307] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_command+0x658/0xeb4) [ 1719.916316] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeout_timer+0x74/0xb8) [ 1719.917315] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_fn+0x24/0x84) [ 1719.918263] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq+0x19c/0x218) [ 1719.919213] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+0x134/0x248) [ 1719.920152] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc) [ 1719.920983] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1719.921793] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/0x5c) [ 1719.922663] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0x50) [ 1719.923520] Exception stack(0xc0ee5f60 to 0xc0ee5fa8) [ 1719.924101] 5f60: ffffffed 0d0e0000 c0eed4c8 00000000 c0ee4030 c0eec420 c0eec49c c05d788c [ 1719.925038] 5f80: c0f19961 c0f19961 c0ee4000 00000000 00000000 c0ee5fa8 c000efb0 c000efa8 [ 1719.925973] 5fa0: 600e0013 ffffffff [ 1719.926379] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x38) [ 1719.927229] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry+0x100/0x144) [ 1719.928182] [<c00638f8>] (cpu_startup_entry) from [<c078dbf0>] (start_kernel+0x414/0x420) [ 1719.929118] ---[ end trace 7ed3597eb69b4f66 ]--- [ 1719.933740] mmcblk0: error -110 sending status command, retrying [ 1719.936469] mmcblk0: error -110 sending status command, retrying [ 1719.939190] mmcblk0: error -110 sending status command, aborting [ 1719.939882] end_request: I/O error, dev mmcblk0, sector 0 [ 1719.940511] Buffer I/O error on device mmcblk0, logical block 0 [ 1729.953107] mmc1: Timeout waiting for hardware interrupt. [ 1729.955738] ------------[ cut here ]------------ [ 1729.956273] WARNING: CPU: 0 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-glibc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x658/0xeb4() [ 1729.958039] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1729.958761] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P W O 3.14-1.17-dm900 #2 [ 1729.959646] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x10/0x14) [ 1729.960538] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c) [ 1729.961371] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common+0x6c/0x88) [ 1729.962300] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowpath_null+0x1c/0x24) [ 1729.963308] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_command+0x658/0xeb4) [ 1729.964315] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeout_timer+0x74/0xb8) [ 1729.965314] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_fn+0x24/0x84) [ 1729.966263] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq+0x19c/0x218) [ 1729.967212] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+0x134/0x248) [ 1729.968151] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc) [ 1729.968981] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1729.969790] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/0x5c) [ 1729.970660] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0x50) [ 1729.971516] Exception stack(0xc0ee5f60 to 0xc0ee5fa8) [ 1729.972098] 5f60: ffffffed 0d0e0000 c0eed4c8 00000000 c0ee4030 c0eec420 c0eec49c c05d788c [ 1729.973035] 5f80: c0f19961 c0f19961 c0ee4000 00000000 00000000 c0ee5fa8 c000efb0 c000efa8 [ 1729.973970] 5fa0: 600e0013 ffffffff [ 1729.974376] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x38) [ 1729.975227] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry+0x100/0x144) [ 1729.976178] [<c00638f8>] (cpu_startup_entry) from [<c078dbf0>] (start_kernel+0x414/0x420) [ 1729.977114] ---[ end trace 7ed3597eb69b4f67 ]--- [ 1729.981748] mmcblk0: error -110 sending status command, retrying [ 1729.984471] mmcblk0: error -110 sending status command, retrying [ 1729.987192] mmcblk0: error -110 sending status command, aborting [ 1729.987883] end_request: I/O error, dev mmcblk0, sector 0 [ 1729.988511] Buffer I/O error on device mmcblk0, logical block 0 Warning! Read error 5; strange behavior now likely! [ 1740.001109] mmc1: Timeout waiting for hardware interrupt. [ 1740.003740] ------------[ cut here ]------------ [ 1740.004277] WARNING: CPU: 0 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-glibc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x658/0xeb4() [ 1740.006042] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1740.006764] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P W O 3.14-1.17-dm900 #2 [ 1740.007649] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x10/0x14) [ 1740.008541] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c) [ 1740.009374] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common+0x6c/0x88) [ 1740.010303] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowpath_null+0x1c/0x24) [ 1740.011311] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_command+0x658/0xeb4) [ 1740.012319] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeout_timer+0x74/0xb8) [ 1740.013317] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_fn+0x24/0x84) [ 1740.014266] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq+0x19c/0x218) [ 1740.015215] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+0x134/0x248) [ 1740.016154] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc) [ 1740.016985] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1740.017795] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/0x5c) [ 1740.018665] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0x50) [ 1740.019521] Exception stack(0xc0ee5f60 to 0xc0ee5fa8) [ 1740.020102] 5f60: ffffffed 0d0e0000 c0eed4c8 00000000 c0ee4030 c0eec420 c0eec49c c05d788c [ 1740.021039] 5f80: c0f19961 c0f19961 c0ee4000 00000000 00000000 c0ee5fa8 c000efb0 c000efa8 [ 1740.021974] 5fa0: 600f0013 ffffffff [ 1740.022380] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x38) [ 1740.023231] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry+0x100/0x144) [ 1740.024182] [<c00638f8>] (cpu_startup_entry) from [<c078dbf0>] (start_kernel+0x414/0x420) [ 1740.025117] ---[ end trace 7ed3597eb69b4f68 ]--- [ 1740.029752] mmcblk0: error -110 sending status command, retrying [ 1740.032473] mmcblk0: error -110 sending status command, retrying [ 1740.035191] mmcblk0: error -110 sending status command, aborting [ 1740.035885] end_request: I/O error, dev mmcblk0, sector 7634936 [ 1740.036573] Buffer I/O error on device mmcblk0, logical block 954367 Warning! Read error 5; strange behavior now likely! Creating new GPT entries. [ 1750.049112] mmc1: Timeout waiting for hardware interrupt. [ 1750.051744] ------------[ cut here ]------------ [ 1750.052283] WARNING: CPU: 0 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-glibc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x658/0xeb4() [ 1750.054049] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1750.054771] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P W O 3.14-1.17-dm900 #2 [ 1750.055657] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x10/0x14) [ 1750.056550] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c) [ 1750.057382] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common+0x6c/0x88) [ 1750.058312] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowpath_null+0x1c/0x24) [ 1750.059319] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_command+0x658/0xeb4) [ 1750.060327] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeout_timer+0x74/0xb8) [ 1750.061327] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_fn+0x24/0x84) [ 1750.062275] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq+0x19c/0x218) [ 1750.063225] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+0x134/0x248) [ 1750.064164] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc) [ 1750.064995] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1750.065805] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/0x5c) [ 1750.066674] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0x50) [ 1750.067532] Exception stack(0xc0ee5f60 to 0xc0ee5fa8) [ 1750.068112] 5f60: ffffffed 0d0e0000 c0eed4c8 00000000 c0ee4030 c0eec420 c0eec49c c05d788c [ 1750.069049] 5f80: c0f19961 c0f19961 c0ee4000 00000000 00000000 c0ee5fa8 c000efb0 c000efa8 [ 1750.069985] 5fa0: 600f0013 ffffffff [ 1750.070391] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x38) [ 1750.071242] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry+0x100/0x144) [ 1750.072195] [<c00638f8>] (cpu_startup_entry) from [<c078dbf0>] (start_kernel+0x414/0x420) [ 1750.073132] ---[ end trace 7ed3597eb69b4f69 ]--- [ 1750.077764] mmcblk0: error -110 sending status command, retrying [ 1750.080494] mmcblk0: error -110 sending status command, retrying [ 1750.083223] mmcblk0: error -110 sending status command, aborting [ 1750.083914] end_request: I/O error, dev mmcblk0, sector 0 Warning! GPT main header not overwritten! Error is 5 [ 1751.092924] mmc1: cache flush error -110 [ 1751.093391] end_request: I/O error, dev mmcblk0, sector 0 [ 1761.121108] mmc1: Timeout waiting for hardware interrupt. [ 1761.123741] ------------[ cut here ]------------ [ 1761.124278] WARNING: CPU: 0 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-glibc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x658/0xeb4() [ 1761.126044] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1761.126766] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P W O 3.14-1.17-dm900 #2 [ 1761.127651] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x10/0x14) [ 1761.128542] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c) [ 1761.129375] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common+0x6c/0x88) [ 1761.130304] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowpath_null+0x1c/0x24) [ 1761.131312] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_command+0x658/0xeb4) [ 1761.132319] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeout_timer+0x74/0xb8) [ 1761.133318] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_fn+0x24/0x84) [ 1761.134266] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq+0x19c/0x218) [ 1761.135215] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+0x134/0x248) [ 1761.136154] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc) [ 1761.136985] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1761.137794] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/0x5c) [ 1761.138664] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0x50) [ 1761.139520] Exception stack(0xc0ee5f60 to 0xc0ee5fa8) [ 1761.140102] 5f60: ffffffed 0d0e0000 c0eed4c8 00000000 c0ee4030 c0eec420 c0eec49c c05d788c [ 1761.141039] 5f80: c0f19961 c0f19961 c0ee4000 00000000 00000000 c0ee5fa8 c000efb0 c000efa8 [ 1761.141975] 5fa0: 600f0013 ffffffff [ 1761.142381] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x38) [ 1761.143232] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry+0x100/0x144) [ 1761.144184] [<c00638f8>] (cpu_startup_entry) from [<c078dbf0>] (start_kernel+0x414/0x420) [ 1761.145120] ---[ end trace 7ed3597eb69b4f6a ]--- [ 1761.149739] mmcblk0: error -110 sending status command, retrying [ 1761.152464] mmcblk0: error -110 sending status command, retrying [ 1761.155184] mmcblk0: error -110 sending status command, aborting [ 1761.155875] end_request: I/O error, dev mmcblk0, sector 0 [ 1761.156503] Buffer I/O error on device mmcblk0, logical block 0 [ 1771.169108] mmc1: Timeout waiting for hardware interrupt. [ 1771.171737] ------------[ cut here ]------------ [ 1771.172274] WARNING: CPU: 0 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-glibc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x658/0xeb4() [ 1771.174038] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1771.174759] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P W O 3.14-1.17-dm900 #2 [ 1771.175643] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x10/0x14) [ 1771.176533] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c) [ 1771.177364] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common+0x6c/0x88) [ 1771.178293] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowpath_null+0x1c/0x24) [ 1771.179300] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_command+0x658/0xeb4) [ 1771.180308] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeout_timer+0x74/0xb8) [ 1771.181306] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_fn+0x24/0x84) [ 1771.182254] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq+0x19c/0x218) [ 1771.183204] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+0x134/0x248) [ 1771.184143] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc) [ 1771.184973] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1771.185784] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/0x5c) [ 1771.186653] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0x50) [ 1771.187509] Exception stack(0xc0ee5f60 to 0xc0ee5fa8) [ 1771.188091] 5f60: ffffffed 0d0e0000 c0eed4c8 00000000 c0ee4030 c0eec420 c0eec49c c05d788c [ 1771.189028] 5f80: c0f19961 c0f19961 c0ee4000 00000000 00000000 c0ee5fa8 c000efb0 c000efa8 [ 1771.189964] 5fa0: 600f0013 ffffffff [ 1771.190369] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x38) [ 1771.191220] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry+0x100/0x144) [ 1771.192171] [<c00638f8>] (cpu_startup_entry) from [<c078dbf0>] (start_kernel+0x414/0x420) [ 1771.193106] ---[ end trace 7ed3597eb69b4f6b ]--- [ 1771.197717] mmcblk0: error -110 sending status command, retrying [ 1771.200446] mmcblk0: error -110 sending status command, retrying [ 1771.203173] mmcblk0: error -110 sending status command, aborting [ 1771.203863] end_request: I/O error, dev mmcblk0, sector 0 [ 1771.204491] Buffer I/O error on device mmcblk0, logical block 0 [ 1771.205196] ldm_validate_partition_table(): Disk read failed. [ 1781.217108] mmc1: Timeout waiting for hardware interrupt. [ 1781.219738] ------------[ cut here ]------------ [ 1781.220274] WARNING: CPU: 0 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-glibc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x658/0xeb4() [ 1781.222039] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1781.222758] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P W O 3.14-1.17-dm900 #2 [ 1781.223640] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x10/0x14) [ 1781.224530] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c) [ 1781.225361] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common+0x6c/0x88) [ 1781.226290] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowpath_null+0x1c/0x24) [ 1781.227297] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_command+0x658/0xeb4) [ 1781.228304] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeout_timer+0x74/0xb8) [ 1781.229302] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_fn+0x24/0x84) [ 1781.230251] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq+0x19c/0x218) [ 1781.231200] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+0x134/0x248) [ 1781.232140] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc) [ 1781.232970] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1781.233780] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/0x5c) [ 1781.234649] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0x50) [ 1781.235506] Exception stack(0xc0ee5f60 to 0xc0ee5fa8) [ 1781.236086] 5f60: ffffffed 0d0e0000 c0eed4c8 00000000 c0ee4030 c0eec420 c0eec49c c05d788c [ 1781.237023] 5f80: c0f19961 c0f19961 c0ee4000 00000000 00000000 c0ee5fa8 c000efb0 c000efa8 [ 1781.237958] 5fa0: 600f0013 ffffffff [ 1781.238364] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x38) [ 1781.239215] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry+0x100/0x144) [ 1781.240165] [<c00638f8>] (cpu_startup_entry) from [<c078dbf0>] (start_kernel+0x414/0x420) [ 1781.241100] ---[ end trace 7ed3597eb69b4f6c ]--- [ 1781.245721] mmcblk0: error -110 sending status command, retrying [ 1781.248449] mmcblk0: error -110 sending status command, retrying [ 1781.251170] mmcblk0: error -110 sending status command, aborting [ 1781.251860] end_request: I/O error, dev mmcblk0, sector 0 [ 1781.252487] Buffer I/O error on device mmcblk0, logical block 0 [ 1791.265109] mmc1: Timeout waiting for hardware interrupt. [ 1791.267737] ------------[ cut here ]------------ [ 1791.268273] WARNING: CPU: 0 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-glibc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x658/0xeb4() [ 1791.270037] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1791.270758] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P W O 3.14-1.17-dm900 #2 [ 1791.271639] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x10/0x14) [ 1791.272529] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c) [ 1791.273359] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common+0x6c/0x88) [ 1791.274288] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowpath_null+0x1c/0x24) [ 1791.275295] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_command+0x658/0xeb4) [ 1791.276303] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeout_timer+0x74/0xb8) [ 1791.277301] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_fn+0x24/0x84) [ 1791.278249] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq+0x19c/0x218) [ 1791.279197] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+0x134/0x248) [ 1791.280137] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc) [ 1791.280967] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1791.281778] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/0x5c) [ 1791.282647] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0x50) [ 1791.283504] Exception stack(0xc0ee5f60 to 0xc0ee5fa8) [ 1791.284085] 5f60: ffffffed 0d0e0000 c0eed4c8 00000000 c0ee4030 c0eec420 c0eec49c c05d788c [ 1791.285022] 5f80: c0f19961 c0f19961 c0ee4000 00000000 00000000 c0ee5fa8 c000efb0 c000efa8 [ 1791.285957] 5fa0: 600f0013 ffffffff [ 1791.286363] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x38) [ 1791.287213] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry+0x100/0x144) [ 1791.288164] [<c00638f8>] (cpu_startup_entry) from [<c078dbf0>] (start_kernel+0x414/0x420) [ 1791.289099] ---[ end trace 7ed3597eb69b4f6d ]--- [ 1791.293711] mmcblk0: error -110 sending status command, retrying [ 1791.296433] mmcblk0: error -110 sending status command, retrying [ 1791.299153] mmcblk0: error -110 sending status command, aborting [ 1791.299843] end_request: I/O error, dev mmcblk0, sector 0 [ 1791.300470] Buffer I/O error on device mmcblk0, logical block 0 [ 1791.301171] mmcblk0: unable to read partition table Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) GPT data structures destroyed! You may now partition the disk using fdisk or other utilities. Setting name! partNum is 0 REALLY setting name! Setting name! partNum is 1 REALLY setting name! Setting name! partNum is 2 REALLY setting name! [ 1801.313114] mmc1: Timeout waiting for hardware interrupt. [ 1801.315747] ------------[ cut here ]------------ [ 1801.316287] WARNING: CPU: 1 PID: 0 at /oe/krogoth/testing/build/dm900/tmp-glibc/work-shared/dm900/kernel-source/drivers/mmc/host/sdhci.c:994 sdhci_send_command+0x658/0xeb4() [ 1801.318052] Modules linked in: lcd(PO) stb_core(PO) bcmdriver(PO) [ 1801.318773] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P W O 3.14-1.17-dm900 #2 [ 1801.319660] [<c0014eb0>] (unwind_backtrace) from [<c00112f0>] (show_stack+0x10/0x14) [ 1801.320552] [<c00112f0>] (show_stack) from [<c05d0408>] (dump_stack+0x88/0x9c) [ 1801.321384] [<c05d0408>] (dump_stack) from [<c001eed0>] (warn_slowpath_common+0x6c/0x88) [ 1801.322313] [<c001eed0>] (warn_slowpath_common) from [<c001ef88>] (warn_slowpath_null+0x1c/0x24) [ 1801.323320] [<c001ef88>] (warn_slowpath_null) from [<c040a4cc>] (sdhci_send_command+0x658/0xeb4) [ 1801.324329] [<c040a4cc>] (sdhci_send_command) from [<c040c428>] (sdhci_timeout_timer+0x74/0xb8) [ 1801.325328] [<c040c428>] (sdhci_timeout_timer) from [<c00295c8>] (call_timer_fn+0x24/0x84) [ 1801.326276] [<c00295c8>] (call_timer_fn) from [<c002a294>] (run_timer_softirq+0x19c/0x218) [ 1801.327225] [<c002a294>] (run_timer_softirq) from [<c00231cc>] (__do_softirq+0x134/0x248) [ 1801.328164] [<c00231cc>] (__do_softirq) from [<c0023574>] (irq_exit+0xb4/0xfc) [ 1801.328996] [<c0023574>] (irq_exit) from [<c000eca8>] (handle_IRQ+0x44/0x90) [ 1801.329805] [<c000eca8>] (handle_IRQ) from [<c00085a0>] (gic_handle_irq+0x2c/0x5c) [ 1801.330674] [<c00085a0>] (gic_handle_irq) from [<c0011dc0>] (__irq_svc+0x40/0x50) [ 1801.331531] Exception stack(0xcd8cbfa0 to 0xcd8cbfe8) [ 1801.332112] bfa0: ffffffed 0d0e8000 c0eed4c8 00000000 cd8ca030 c0eec420 c0eec49c c05d788c [ 1801.333049] bfc0: c0f19961 c0f19961 cd8ca000 00000000 00000000 cd8cbfe8 c000efb0 c000efa8 [ 1801.333984] bfe0: 60070013 ffffffff [ 1801.334390] [<c0011dc0>] (__irq_svc) from [<c000efa8>] (arch_cpu_idle+0x2c/0x38) [ 1801.335242] [<c000efa8>] (arch_cpu_idle) from [<c00638f8>] (cpu_startup_entry+0x100/0x144) [ 1801.336191] [<c00638f8>] (cpu_startup_entry) from [<00008664>] (0x8664) [ 1801.336950] ---[ end trace 7ed3597eb69b4f6e ]--- [ 1801.341536] mmcblk0: error -110 sending status command, retrying [ 1801.344254] mmcblk0: error -110 sending status command, retrying [ 1801.346963] mmcblk0: error -110 sending status command, aborting [ 1801.347666] end_request: I/O error, dev mmcblk0, sector 7634904 Unable to save backup partition table! Perhaps the 'e' option on the experts' menu will resolve this problem. Warning! An error was reported when writing the partition table! This error MIGHT be harmless, or the disk might be damaged! Checking it is advisable. root@dm900:~# fdisk -lu / dev / mmcblk0 fdisk: can't open '/': Is a directory fdisk: can't open 'dev': No such file or directory fdisk: can't open '/': Is a directory fdisk: can't open 'mmcblk0': No such file or directory root@dm900:~# fdisk -lu / dev / mmcblk0 fdisk: can't open '/': Is a directory fdisk: can't open 'dev': No such file or directory fdisk: can't open '/': Is a directory fdisk: can't open 'mmcblk0': No such file or directory root@dm900:~# fdisk -lu / dev / mmcblk0 fdisk: can't open '/': Is a directory fdisk: can't open 'dev': No such file or directory fdisk: can't open '/': Is a directory fdisk: can't open 'mmcblk0': No such file or directory root@dm900:~# -
Display More
Connect Telnet over Putty and Try
fdisk -lu /dev/mmcblk0
blkid|grep mmcblk0
Write the Output here
I Seen this kind of Failure once with Message
CodeFatal: Target device '/dev/mmcblk0p2' is not writableand it was a Corrupted Partition on Box
If The Output Looks like
Code
Display Moreroot@dm920:~# fdisk -lu /dev/mmcblk0 Disk /dev/mmcblk0: 7818 MB, 7818182656 bytes 4 heads, 16 sectors/track, 238592 cylinders, total 15269888 sectors Units = sectors of 1 * 512 = 512 bytes Disk /dev/mmcblk0 doesn't contain a valid partition table root@dm920:~# blkid|grep mmcblk0Otherwise the Good Partition Looks like
Code
Display Moreroot@dm900:~# fdisk -lu /dev/mmcblk0 Found valid GPT with protective MBR; using GPT Disk /dev/mmcblk0: 7634944 sectors, 3728M Logical sector size: 512 Disk identifier (GUID): 4956757f-9fcb-4b4a-b80a-6e8a893f22df Partition table holds up to 128 entries First usable sector is 34, last usable sector is 7634910 Number Start (sector) End (sector) Size Code Name 1 2048 65535 31.0M 0700 kernel 2 65536 2097151 992M 0700 rootfs 3 2097152 7634910 2703M 0700 data root@dm900:~#There is Only Experimental Way to get your Box again to work
you have to Create Partition before you will be able to Flash new Image on it
How did you Damanaged your Partition does it Crashed before you Tried to Put new Image on Box ???
More Questions did you Installed before the VCP Drivers for Dream ??? Serial Connect
https://www.silabs.com/develop…vcp-drivers?tab=downloads
Then you Will be Able to make Bootlog
If in Bootlog you see
CodeDDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000 OK DDR1: =@ ffe0e780 <= ffe0df10 MEMSYS-1 @ f1180000 MEMSYS ERROR: 00000001Then your Memory is Corrupted
But i still Asume you just Crashed your Partition
You Can Recover it at your own Risk over Telnet with
Codesgdisk /dev/mmcblk0 -z -n 1:2048:65535 -c 1:kernel -t 1:8301 -n 2:65536:4194303 -c 2:rootfs -t 2:8307 -n 3:4194304: -c 3:data -t 3:8300Use this with Care and Try After that
Use some more times
Codefdisk -lu / dev / mmcblk0till you see Partitions are Ok
Load a new Image with Rescue Loader on Box after you see a Partition is Ok and Box will be like Before
With some Risk you will get it Alive again
Thank you so much for all this guidance.
Regarding your question# How did you Damanaged your Partition does it Crashed before you Tried to Put new Image on Box ???
Answer : I was changing OpenPli to OpenATV and following same way by IP address and sadly stopped. I'll tried by ipk and dep image's, also doesn't work.
Regarding your question# More Questions did you Installed before the VCP Drivers for Dream ??? Serial Connect
Answer : Yes... but I think you knew that already for Dreambox DM900 we have to use mini usb Silicon Labs CP210x Usb to UART Bridge.
-
Display More
You have telnet connection, so try telnet command:
update-rescue -v
Install latest dreamos dm900 firmware = 2021-10-29 / Yours = 2020-07-20
https://www.dreamboxupdate.com…le/images/dm900/index.php
If still not working go into Rescue Mode and try Online Recovery
Thank you for your response, but give same error
1. Warning : could not read CA
2. Warning : Please consider updating your rescue loader
3. Fatal : Do not run this command from rescue mode
-
Try one image in ipk
I also did ipk image by OpenATV, but it does not work and gives the same warning. please see a photo's.
-
Code
Hello : I have a Dreambox DM900, and unfortunately when I inserted the correct image of this device it gave me a red light and I tried many programs such as Putty, Advanced Serial Port Terminal and Sscom, but DCC works only on Telnet and does not give access to the device, I will send pictures of what is happening to the device. Please help and thank you. -
menu>setup>system>timezone
Yes I did and showed timezone but time one hour over and date 01/01/1970.
-
Hi dear:
Please I need help to fix time and date, but I search all receiver can't found it.
if some have any idea please help me with this issue.
-
Display More
The reason, I want it to know which one is better.
Bro, if you want to use images such as atv, pli, pure 2, and similar images on dream 9xx, then there is a Barry Allen plugin for these purposes. in the flash install the official from dream os.
look, I have all these images installed now in the receiver using the Barry Allen plugin, I can switch to any and use one of the installed ones. . read the topics on the forum and you can implement everything on your 920. Good luck!!!
linuxsat-support.com/thread/?postID=651458#post651458And what seagen told you, I fully share his point of view-to buy a dreambox and use images from open, this is a perversion.
Thank's bro,
Question > Can install more than 2 or more images in Dreambox 920 or all Enigma 2 receivers?
-
Thank you so much, it's worked.
-
Thanks,,,,
I found configuration, I’ve got 2 tuner DVB-S2 but both showed message “ inactive “ and down only Red back key button. How I’ve to activate tuners?
Regards
-
Hi dear;
I installed dream elite image on Dreambox DM920, But I am not able to see configure.
I've already tried several options, but I'm not having success.
How I can access to configuration?
Regards
-
-
Dear Seagen,
i wrote it as example, and + Dreambox 920, I've got VU+ Duo 4K SE.
The reason, I want it to know which one is better.
-
Thanks for your reply, yes i did same why @hecha71 he was enplaned, but I did not flashed by Vu+ image.
-
Thanks for a reply but, This is the original Dreambox company image.
I need to install openATV, how I can do this?
-
I’ve Dreambox DM920, and I am a beginner and frankly I don't know where to start and I asked for your help.
Already I flashed latest image ( Rescue ) mode and I did this by IP Address of Dreambox by laptop.
Actually receiver it’s empty and I didn’t install any other images like openPLi or openATV and others. And I want to install it but I don’t no how.
Question is, do I need loader and transfer or I’ve to use usb stick, how I do this. Please I want to do it step by step.
Regards
-
Hi dear;
I bought Dreambox 920, and I am a beginner and frankly I don't know where to start and I asked for your help.
Already I flashed image receiver, but I'm not sure it's new update of this image.
If I want to add images, I’ve to use loader and program the receiver or I’ve to do it by usb stick?
Regards.
