Unfortunately it didn't last long! I found the dish at the bottom of its stroke again and so before throwing away the engine I wanted to do some "micro surgery" who knows, maybe it might go better? ...for now it turns, 53°EST inclusive.
Posts by Batroc
-
-
I want to update the situation for the benefit of those reading. I disassembled the rotor and after inspecting everything I discovered the worn gear at the end of the stroke (as you can see from the photo). Since there's no question of replacing the part, I reassembled everything and to prevent the race from reaching the damaged part I eliminated the 53°E satellite from the list which, among other things, doesn't serve me that much. So now the EAST race stops at 52°E and that's fine for now.
Good evening -
SATRACER 3
Hi everyone, has my engine decided it's time?
I turned everything off last night and it worked wonderfully, as it has for many years, now it's stuck at 52° EST and no longer goes one way or the other! I tried with 2 different decoders without the result changing. It can't be a cable problem because I normally receive the 52° EST channels.Do you have any idea what can be done? Do you know if there is a way to reset the engine?
Thanks for the attention
-
Batroc I once described the installation procedure here as well --> Backup - Warder image for Octagon SF8008
Done, everything went well. Thank you again.
-
Batroc I once described the installation procedure here as well --> Backup - Warder image for Octagon SF8008
Yes, I definitely followed this guide when I installed it last time. I will try this evening, Thank you very kindly.
-
Good morning, I need help. I would like to install the new SAPRO Image backup on OCTAGON SF8008 4K in slot 3 where I have the old version, but even though I did it a little while ago I no longer remember the procedure. Can you suggest me the solution? Thank you and good day
-
Warder private - link to the new version can be found in the first post.
Thank you. What's new?
-
I have a problem with the download blocking after 500mb, does this happen to you too or is it my problem?
Thanks Warder for your back ups.
Warder private - link to the new version can be found in the first post... downloaded now everything is fine (751.2 MB)
-
I was asking you if the system has already been in use to understand if it is a question of pointing the monobloc, which must be like in the photos.
-
My configuration as i said before is port A for hotbird ((band Ku) and port B for astra (band ku).
But did your configuration already work with another decoder?
Have you tried reversing the doors? -
Ma se invece di pubblicare i miei settings fra l'altro senza autorizzazione.....pubblicaste solamente il collegamento al mio sito forse sarebbe meglio
OPS!!! Pensavo di fare un cortesia a chi mette a disposizione il proprio lavoro ( che ho sempre rispettato) e a chi li trova su i vari Forum.
-
enigma2-plugin-systemplugins-ciplushelper-all.deb
Plugin Ciplushelper 5.4 r0 (*.ipk) - 22.06.2023 - Add Support Vu+ - Add Support new openATV 7.3 with CI+ 1.4 Support
-
This plugin "ciplushelper_5.4-r0_all.rar" will work on OpenBH 5.3?
I don't think so, for OpenBh there is this!
-
Skin Blue Metal FHD version 1.14 Python 3 for OpenPLi 9.0 - 22.06.2023 - Some image windows have been modified - Remove some unnecessary graphics from the skin - Removed DarkSkyWeather weather settings - Fixed VisualWeather screenshot (not all weather info is set).
Skin Blue Metal FHD version 2.20 for Openatv 7.x images - 22.06.2023 - The update bluemetalfhd 2.20 has been keeping up with some variables on the image openatv 7.3 Thanks to the developer quinto. What's New Added to BlueMetalFHD Skins - DarkFHD: Updated to Openatv 7.x images - Improving the skin components of the converter and renderer - Changed position of weather icons for normal display in the second infobar - Enable/Disable weather logs - Kexec MultiBoot Manager has designed a special multiboot screen for VIEW devices
-
enigma2-plugin-systemplugins-ciplushelper_5.4-r0_all.rar
-
enigma2-plugin-extensions-youtube_1+git1139+419078c-r0.0_mips32el.rar
-
update based on v20230610
for the last time
there is no update as of 10/06/2023
The last one is the one I uploaded from 08/06/2023
Some idiot (and I found out who he is ) changed the date in the file...for sensationalism...I don't know
As you'll see, the screenshot is from Billy2011's official thread.
I'm sorry I fell for it and created discomfort for someone! FORGIVE ME!
-
enigma2-plugin-extensions-rakutentv 20230527 all.ipk
-
That's for Usals I'm talking about using a positioner for cband.
Yes it is true, but unfortunately this image seems to have many limits and I have abandoned this image on OCTAGON SF8008 4K UHD!
-
I'm sure the answer is literally in front of my face but I can't see where to store the satellite position for a cband sat ? It only says "press ok to store" but it doesn't give an option to assign a position number or slot number ?? Thanks
I set USALS (engine) following MENU-Main Menu (FAV)-INSTALLATION-SAT settings-ANTENNA SETTINGS-Moor settings-I INSERTED LATITUDE AND LONGITUDE- UNDER "Satellite" I then inserted the satellites I was interested in. Keep in mind that you have to enter them one at a time and in the "Save" item as suggested "press OK"
I don't know if it was useful for you but I tried!