Posts by wotevaman

Quote from zuka1977

Quote from zuka1977

Hi, I found this TVhedend which works on my device, can somebody make icam patches?

Thankstvheadend.rar

Can sombody give me instruction how to do patch of Tvhedend with Icam? Thanks.

Quote from fegol

cengizkartal ... --->

https://github.com/catalinii/libdvbcsa

https://github.com/pimzand/tvheadend/tree/icam-patch

------------------------------------------------------------------------------

out: -->

2023-06-30 08-47-41.png

Display More

Everything is here ! ….. 1st load Linux ,2nd load libdvbcsa ….. 3rd load tvheadend with patch from GitHub

Quote from samur

they are not present in forums,

or crying in forums to get a solution.

😆

Quote from Miecz

but it doesnt freeze like fake cw do, it literally stutters for half a sec, or so, sometimes the sound doesnt even break, with fake cws u get like 5-10ish s freeze depending on the caid

It’s maybe your isp

OSCam-ICam For SKY [ IT, UK, DE ] that’s the oscam needed and the thread for it spider85 😎

Quote from tvline

i think you used version of tvheadend not good , and need modification some config.

What modifications ??? What version tvh ???

Quote from dave007

Ok thanks to all for info.

So its a server problem !

As always 😂

It’s for that version of oscam that’s why there’s a thread for more help

Quote from spider85

Quote from wotevaman

I too have the same issues with tvheadend and oscam … I’ve even tried patched tvh and patched libcsa still same issue… you should try using the oscam from this forum…(samur) 👌😎👍

Tnx for your help, did you fix it with a other OSCAM? can you link me too the one you use from this forum?

Here it is ….

some fixes:

> Improvement of ICAM-StreamRelay for almost all devices.

> freezing image on some channels like: Sky Sport F1 HD (19°E).

> phenomenon crashes of oscam with IPv6.

###

> Add "Russkiy Mir" Emu Support 56°E.

Just ADD the READER

[reader]

label = softcam

protocol = emu

device = emulator

caid = 0D00,0D02,0500,0E00,090F,1801,0604,2600,FFFF,4AE1,1010,44A0

detect = cd

group = 1

emmcache = 2,2,0,0

emu_auproviders = 0E00:000000;2600:000000;44A0:000000

Notes:

making your smartcard working you will need k1 key like with Sky DE.

########################################

## reader configuration

########################################

label = Sky_xx

protocol = smargo

device = /dev/ttyUSB1

caid = 09xx

boxid = xxxxxxxx

ins7e = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

ins7e11 = 15

k1_unique = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

detect = cd

mhz = 600

cardmhz = 369

ident = 09xx:000000

group = 1

emmcache = 1,1,2,0

blockemm-unknown = 1

ndsversion = 2

If using radegast change:

Include ECM in HTTP streams - YESDescramble HTTP streams - NODescramble received HTTP streams - NOLoad unlinked userbouquets - YES

If using dvbapi change:

Include ECM in HTTP streams - NODescramble HTTP streams - YESDescramble received HTTP streams - NOLoad unlinked userbouquets - YES

To get things working with icam

1. You need a valid card or a card share, for either sly DE, sly UK or Sly IT. If you want all 3 you need all 3 cards/ shares.

2. Oscam emu bin with icam patch for the required package,

the one in the first post is patched for all 3. Rename the bin your replacing correctly and give it 755 Permissions.

3. The corrrect oscam configs. Attached to the first post is some basic configs, with example readers.

4. An icam channel list for each package you require. ciefp setting has all 3 https://www.linuxsat-support.com/filebase/file/290-enigma2-ciefpsettings/#versions UK users can use ABM and custom mix, thx dsayers or KiddaC list attached.

5. the correct STB settings as posted above.

OR:

Below is an IPK that should work on all STB's. VIX users should use the script method for softcams.

As always backup your image before trying any changes.

The IPK contains the patched bin for ARM and MIPS STB's and the basic configs.

############################################

IPK for installation on Enigma2 receivers attached here

#enigma2-plugin-softcams-oscam_11718-emu-icam_all.ipk#

############################################

Stream relay bouquet files on line below

linuxsat-support.com/cms/attachment/220253/

Please, don't send me PM because i will not responds.

Thanks,

;

For most people, the ipk above will suffice and is easiest to use. However, for those wanting the binary files, they are are attached below.

To use the binary, firstly, install an oscam from your image's plugins server. Download the binary relevant for you receiver. Rename the binary to match the one that is installed in your receiver . Ensure it has 755 properties.

mipsel libusb binary

OSCam-11718-798 (mipsel libusb).zip

arm7ve binary

OSCam-11718-798 (armv7ve).zip

arm7ve libusb binary

OSCam-11718-798 (armv7ve libusb aio ipv6).zip

arm7ve libusb pcsc binary

OSCam-11718-798 (armv7ve libusb pcsc).zip

ubuntu i686

OSCam-11718-798 (Ubuntu i686).zip

ubuntu 64bit

OSCam-11718-798 (Ubuntu x86_64).zip

aarch64

OSCam-11718-798 (aarch64).zip

qnap arm libusb

OSCam-11718-798 (qnap arm libusb).zip

mipsel libusb aio ipv6

OSCam-11718-798 (mipsel libusb aio ipv6).zip

arch64 libusb ipv6

OSCam-11718-798 (aarch64 libusb aio ipv6).zip

sh4 binary

OSCam-11718-798 (SH4).zip

some fixes:

> Improvement of ICAM-StreamRelay for almost all devices.

> freezing image on some channels like: Sky Sport F1 HD (19°E).

> phenomenon crashes of oscam with IPv6.

> Fixed bug with 64 bits Devices like:  DM ONE/TWO/SEVEN, Ubuntu/Debian X86_64,...etc

###

> Add "Russkiy Mir" Emu Support 56°E.

[reader]

label = softcam

protocol = emu

device = emulator

caid = 0D00,0D02,0500,0E00,090F,1801,0604,2600,FFFF,4AE1,1010,44A0

detect = cd

group = 1

emmcache = 2,2,0,0

emu_auproviders = 0E00:000000;2600:000000;44A0:000000

Notes:

making your smartcard working you will need k1 key like with Sky DE.

########################################

## reader configuration

########################################

label = Sky_xx

protocol = smargo

device = /dev/ttyUSB1

caid = 09xx

boxid = xxxxxxxx

ins7e = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

ins7e11 = 15

k1_unique = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

detect = cd

mhz = 600

cardmhz = 369

ident = 09xx:000000

group = 1

emmcache = 1,1,2,0

blockemm-unknown = 1

ndsversion = 2

If using radegast change:

Include ECM in HTTP streams - YESDescramble HTTP streams - NODescramble received HTTP streams - NOLoad unlinked userbouquets - YES

If using dvbapi change:

Include ECM in HTTP streams - NODescramble HTTP streams - YESDescramble received HTTP streams - NOLoad unlinked userbouquets - YES

To get things working with icam

1. You need a valid card or a card share, for either sly DE, sly UK or Sly IT. If you want all 3 you need all 3 cards/ shares.

2. Oscam emu bin with icam patch for the required package,

the one in the first post is patched for all 3. Rename the bin your replacing correctly and give it 755 Permissions.

3. The corrrect oscam configs. Attached to the first post is some basic configs, with example readers.

4. An icam channel list for each package you require. ciefp setting has all 3 https://www.linuxsat-support.com/filebase/file/290-enigma2-ciefpsettings/#versions UK users can use ABM and custom mix, thx dsayers or KiddaC list attached.

5. the correct STB settings as posted above.

OR:

Below is an IPK that should work on all STB's. VIX users should use the script method for softcams.

As always backup your image before trying any changes.

The IPK contains the patched bin for ARM and MIPS STB's and the basic configs.

############################################

IPK for installation on Enigma2 receivers attached here

#enigma2-plugin-softcams-oscam_11718-emu-icam_all.ipk#

############################################

Stream relay bouquet files on line below

linuxsat-support.com/cms/attachment/220253/

Please, don't send me PM because i will not responds.

Thanks,

;

For most people, the ipk above will suffice and is easiest to use. However, for those wanting the binary files, they are are attached below.

To use the binary, firstly, install an oscam from your image's plugins server. Download the binary relevant for you receiver. Rename the binary to match the one that is installed in your receiver . Ensure it has 755 properties.

mipsel libusb binary

OSCam-11718-798 (mipsel libusb).zip

arm7ve binary

OSCam-11718-798 (armv7ve).zip

arm7ve libusb binary

OSCam-11718-798 (armv7ve libusb aio ipv6).zip

arm7ve libusb pcsc binary

OSCam-11718-798 (armv7ve libusb pcsc).zip

ubuntu i686

OSCam-11718-798 (Ubuntu i686).zip

ubuntu 64bit

OSCam-11718-798 (Ubuntu x86_64).zip

aarch64

OSCam-11718-798 (aarch64).zip

qnap arm libusb

OSCam-11718-798 (qnap arm libusb).zip

mipsel libusb aio ipv6

OSCam-11718-798 (mipsel libusb aio ipv6).zip

arch64 libusb ipv6

OSCam-11718-798 (aarch64 libusb aio ipv6).zip

sh4 binary

OSCam-11718-798 (SH4).zip

Display More

Or maybe run 2 Oscams one with crccws and one without

Quote from spider85

miljan017, Tnx for your answer!

Quote from miljan017

skipcws cheksum chek in cfg

Do you meen "disablecrccws" in global?

Code

[global]
logfile                       = /var/log/oscam.log
initial_debuglevel            = 1
clientmaxidle                 = 300
disablecrccws                 = 1

If so do i need to add it somewhere else? this alone does not fix it

Display More

I too have the same issues with tvheadend and oscam … I’ve even tried patched tvh and patched libcsa still same issue… you should try using the oscam from this forum…(samur) 👌😎👍

Quote from maj786

On the new config file on oscam.server it has this so shall I delete all this and add the one which I'm using now or shall I leave all this as it is and add the one which I'm using now?

Surely you just need to add your smart card in your reader ?

Quote from maj786

From this list which one do I need to install?

Also do I need to download and install new channel list or will the one I have on my reciever work?

Read the everything you need …. Am sure your box is a arm7 so the Ubuntu one may not be the one for you … enigma 2 ipk images is for you ,but as master g says “read the everything you need thread”

Quote from master G

Quote from maj786

which one do I need to install?

None of the above, use the .ipk

Quote from maj786

Also do I need to download and install new channel list or will the one I have on my reciever work?

Read the "everything you need" thread. It explains you need a custom channel list.

Quote from samur

i have a question which i want to ask for a long time ago.

Does anyone have one of these service providers: Sky brasil, Sky Mexico, Sky New zeland, .....?

!!!

;

Display More

Do they use icam too ? (Nagra 2-3) ???

Quote from gazz12345

Quote from wotevaman

Quote from gazz12345

thanks for every ones help i seen that 0963 and 0960 work where as 0961 doesnt

who says that 0961 doesn’t work …. ?

maybe it might clear if u have the physical card but i dunno .

so it does clear most sd channels with real card 61 ,but my issue is the ones that dont work i need to tick do check chcksum in the reader settings then the remaining 3-7 channels work but all the other ones then dont ...lol ...so i just leave it because the ones that work is way more than the ones that dont ... maybe by having two oscams this could be resolved .. and regards to running dvbapi i too have the same problem (i use tvh tho)so i just use ncamd and i know cccam works too but dvbapi i need to go read up and get more info in it.

Quote from gazz12345

thanks for every ones help i seen that 0963 and 0960 work where as 0961 doesnt

who says that 0961 doesn’t work …. ?

Quote from samur

Quote from wotevaman

Quote from samur

Quote from wotevaman

Is there any chance you could compile oscam 11718-798 arm7ve but with added pcsc drivers.

classD3 insBE doesnt seem to work on this arm7ve with pcsc,maybe its me maybe i need to go sleep first lol

I don’t use dvbapi at the moment just using it with ncamd and it was working so when I see blocked global Emms should be a very higher number than the ones used for receiving cleared tv that’s how I know it’s working .. if you change the settings I got it to activate au on oscam try different settings in the emm section on reader

Quote from Chris230291

I am not sure what you mean. Its a PC running TVHeadend.

If you google TVHeadedn EMM you see people saying it was bugged.

How Do I know they are getting through?

I use a triax tss 400 to send my signals to tvheadend over lan (satip) that delivers AU no problems … but if I use a shit usb device for receiving sat signals it never seemed to update for me … using tbs cards always seems to work too

What are you using to receive the satellite signals Chris 😎

Quote from samur

arm7ve binary

OSCam-11718-798 (armv7ve).zip

arm7ve libusb binary

OSCam-11718-798 (armv7ve libusb aio ipv6).zip

thank you for your massive efforts…. Is there any chance you could compile oscam 11718-798 arm7ve but with added pcsc drivers please 🙏 I would really appreciate it and maybe a few others would too 😎