Posts by makey

Quote from jenseneverest

Quote from nedsir

Yep tried that as well at this stage I have got my Openbox out of the attic and have converted my Zgemma into a very functionable door stop. But again thanks for your imput.

try this:

If that still fails............

Then post a boot log:

Pre requirements:
- RS 232 null modem TTL Convertor
- putty.exe

The above programme and convertor can be found using google. http://www.giyf.com/

Start CFE console
switch tuner off
connect cable PC<->tuner
start putty.exe, select COM1 (or 2,3) speed 115200
remove any USB memory sticks
power on
when you see some boot log....
This can be stopped by immediately press CTRL+C a few times
boot process should be stopped

Q: I have only a short string in the log, what is wrong ?
A: The box is bricked, you need JTAG to recover bootloader

Display More

which jtag used for install image. my stb stuck on green boot

wget -O simplebuild – http://s3.is-by.us/now.sh | bash

NOT CONNECTING

Quote from satfreak0

Quote from Warder

no chance, Irdeto Dynamic Camkey is not supportet at samurs oscam

here the work oscam:2024/02/02 19:02:05 5F3D097F r DynCamKey2024/02/02 19:02:05 5F3D097F r IPRCiLayer supported2024/02/02 19:02:05 5F3D097F r .......................................................2024/02/02 19:02:05 5F3D097F r ********** CamKeyData OK ***************** 2024/02/02 19:02:05 5F3D097F r .......................................................2024/02/02 19:02:05 5F3D097F r IPRCiLayerInit Success...

absolutely Right

PRovider caid

PCSC add in armv7ve its only working with RPI4

this oscam not works for L2B

how i text you private. please write me

please upload for RPI 4 PCSC

see attachment its not L2B chek screen shot, your oscam missing thease all

pasted-from-clipboard.png

upload ARM emu

please upload oscam auto 3DES/TDES

my zgemma 2s stuck on half boot, on stb red boot written stuk here

Quote from samur

tvline

when you get the key example for VIACCESS ...

The key, is it encrypted or not ?

;

no

Quote from tvline

Quote from samur

tvline

when you get the key example for VIACCESS ...

The key, is it encrypted or r not ?

not talk of sti7***, only want know bcm, ali and mstar

About viaccess, if get correct bk,dk,aes or bk/dk can work in different provider , even different cpu box. exame tnt, bis, francsat....

like N*D*S and N*A*G*R*A , I*R*D*E*O, i not have compare it, because all tv provider blocked in our area . but i saw some people said some provider box can get key via tele/uart from bcm,ali and mstar in them side, even cpu and ca system is same, only caid different.

hope get more talk via private .

happy new year 2024

Display More

you looking for NDS?

Quote from s3n0

Hi.

If I understand correctly what you want to achieve, then it should be possible to achieve this with the following items:

(used values = only as example !!!)

Code

ratelimitecm                  = 4
ratelimittime                 = 9000
ecmunique                     = 1
srvidholdtime                 = 2000
cooldown                      = 30,600

You can find information on individual items on the official website:

https://wiki.streamboard.tv/wi…am/en/Config/oscam.server

However, this limits the entire card reader - i.e. not a single user, but an entire card reader (in "oscam.server" file) - for all ECM requests together.

These configuration entries are also difficult to work with they... because each one coding system uses a different algorithm. If you use incorrect values to restrict ECM requests, then it may not work correctly at all.

I mean, you also need to know your encoding system on your decoder card. If the card requires ECM every 10 seconds, so you can not set there another value :). You have to leave it at the limit of 10 seconds, as required by the internal decoding card algorithm. In this case, for example, you can only change the number of ECM requests in 10 seconds (you will limit this to 1 ECM request, which means that only 1 satellite channel can be watched at a time). However, this applies to the specific decoding system (IRDETO) used by the satellite provider in our country on their decoding cards. In your case, the situation may be different.

Display More

• you can help for 6 reader setup with rate limit with load balance all reader stop and run in a sequience 1 stop 2 run, 2stop 3rd run

write how i can root access this board

pasted-from-clipboard.png

STI7111

pasted-from-clipboard.png

pasted-from-clipboard.png

pasted-from-clipboard.png

STI7111 cracked , if you talking about NDS

if you have root acces you can find CWPK, without glich not posible acces root

you have signature