The amiko 8900 and alien2 can be very fussy when loading images from spark, you can almost tell when loading the file if it only takes a few seconds and says finished it won't boot. It should take over a minute to do it properly.
I found out by trial and error that i get less failures if i format the usb stick before transferring the image.
Posts by theblueirish
-
-
Tried on two different images for Amiko Alien2, none of the buttons will move over to right hand side. will keep trying.
-
Maybe unrelated but check if its only doing it when you switch to vertical or horizontal transponder. i seen this issue with a dm500 and a certain type of LNB (dont remember which). it kept rebooting when switching to a vertical channel on sat change. Switch sat on a horizontal transponder and it was ok.
-
Will i put a request in the teamviewer section or ok to post here? i am available all night.
-
Thanks for the reply.
Here is my process, I havent changed any configs.
Downloaded oscam+cccam from linuxsat addon panel in tsmedia.
Start this and it reads the card ok inc premium channels, all good at this point except it needs a newer version of oscam to overcome the problems with RTe channels.
So here is what i do next.
Change emu to common interface, rename oscam to oscam.old and FTP the new oscam binary to /usr/bin and chmod to755.
Restart the oscam+cccam emu.
Then i get the second picture which doesn't read the card.I don't change any other files. I was thinking of taking this to teamviewer support, do you think I should?
-
Still at this a week later with no luck. RTE channels unwatchable over the weekend.I have attached a couple of pics to see if anyone can point out what i am missing.
29f6d0f.jpg
d606df130584ff6f8e60e49.jpgOnly thing I can see is one reader is named in capitals and other is lowercase.
-
back to original 6059 and all ok, note the reader name has changed case, could this be an issue/
OSCAM 1.20-unstable_svn build #6059
STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN SCRIPT SHUTDOWN
hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 0x54be98 s 0 root 127.0.0.1 0 server 31.12.13 12:55:22 00:00:22 0000:0000 00:00:22 OK
Hide 0x573920 h 1 root 127.0.0.1 0 http 31.12.13 12:55:22 00:00:22 0000:0000 00:00:16 OK
Readers 1/1
Hide 0x572110 r 1 ***uk ON OFF 127.0.0.1 0 internal 31.12.13 12:55:22 00:00:22 0000:0000 no data 00:00:22 CARDOK (11 entitlements) -
PHP
Display MoreOSCAM 1.20-unstable_svn build r9164 STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status Hide 0x51fdf0 s 0 root 127.0.0.1 0 server 31.12.13 12:48:00 00:00:39 0000:0000 00:00:14 OK Hide 0x531268 h 1 root 127.0.0.1 0 http 31.12.13 12:48:00 00:00:39 0000:0000 00:00:31 OK Readers 0/1 Hide Restart r 1 ***UK ON OFF 127.0.0.1 0 internal 0000:0000 no data 00:00:39 ERROR (no entitlements) Clients 1/1 (1 with ECM within last 25 seconds) Hide Kill c 1 linuxsat ON ON 127.0.0.1 3448 newcamd (CCcam) 31.12.13 12:48:25 00:00:14 0963:CC01 (0ms) by not found 00:00:03 OK 2013/12/31 12:48:00 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9164 (mipsel-unknown-linux-gnu) 2013/12/31 12:48:00 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5182 2013/12/31 12:48:00 0 s services reloaded: 0 services freed, 20 services loaded, rejected 0 2013/12/31 12:48:00 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled 2013/12/31 12:48:00 0 s signal handling initialized 2013/12/31 12:48:00 0 s 37 tier-id's loaded 2013/12/31 12:48:00 0 s 1000 provid's loaded 2013/12/31 12:48:00 0 s newcamd: initialized (fd=7, port=10000) 2013/12/31 12:48:00 0 s -> CAID: 0963 PROVID: 000000 2013/12/31 12:48:00 0 s ***UK [internal] creating thread for device /dev/sci0 2013/12/31 12:48:00 0 s loadbalancer: can't read from file /tmp/.oscam/stat 2013/12/31 12:48:00 0 s waiting for local card init 2013/12/31 12:48:00 531268 h webif: decompressed 56210 bytes back into 162152 bytes 2013/12/31 12:48:00 531268 h HTTP Server running. ip=0.0.0.0 port=8888 2013/12/31 12:48:00 52F340 r ***UK [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357) 2013/12/31 12:48:01 52F340 r ***UK [internal] card detected 2013/12/31 12:48:02 52F340 r ***UK [internal] ATR: 3F 2013/12/31 12:48:02 52F340 r ***UK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2 2013/12/31 12:48:02 52F340 r ***UK [internal] Calculated work ETU is 18.60 us reader mhz = 500 2013/12/31 12:48:02 52F340 r ***UK [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz) 2013/12/31 12:48:03 52F340 r ***UK [internal] card system not supported 2013/12/31 12:48:03 52F340 r ***UK [internal] Normal mode failed, reverting to Deprecated Mode 2013/12/31 12:48:04 52F340 r ***UK [internal] ATR: 3F 2013/12/31 12:48:04 52F340 r ***UK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2 2013/12/31 12:48:04 52F340 r ***UK [internal] Calculated work ETU is 74.40 us reader mhz = 500 2013/12/31 12:48:04 52F340 r ***UK [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz) 2013/12/31 12:48:05 52F340 r ***UK [internal] card system not supported 2013/12/31 12:48:05 52F340 r ***UK [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1 2013/12/31 12:48:05 52F340 r ***UK [internal] card initializing error 2013/12/31 12:48:06 0 s init for all local cards done 2013/12/31 12:48:06 0 s anti cascading disabled 2013/12/31 12:48:25 551638 c client connected to 10000 port 2013/12/31 12:48:25 551638 c encrypted newcamd:10000-client 127.0.0.1 granted (linuxsat, au=on (1 reader)) 2013/12/31 12:48:25 551638 c user linuxsat authenticated successfully (CCcam) 2013/12/31 12:48:25 551638 c AU disabled for user linuxsat 2013/12/31 12:48:31 551638 c linuxsat (0963&000000/FFFF/CC01/5F:FFACB958B89E3280D4D69AA49504519D): rejected group (0 ms) (no matching reader) 2013/12/31 12:48:36 551638 c linuxsat (0963&000000/FFFF/CC01/5F:A1FAB4B3364464F5F53E15941BC72B55): rejected group (0 ms) (no matching reader) Switch Debug from 0 to 0 1 2 4 8 16 32 64 128 256 512 1024 2048 4096 ALL OSCAM Webinterface developed by Streamboard Team - 31.12.13 12:48:39 | Access from 192.168.0.7 Start: 31.12.13 - 12:48:00 | UpTime: 00:00:39 | Process ID: 5182 WebIf Style by -
updated to todays build, still no joy.
PHP
Display MoreOSCAM 1.20-unstable_svn build r9163 STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status Hide 0x51fdf0 s 0 root 127.0.0.1 0 server 31.12.13 12:13:43 00:00:48 0000:0000 00:00:22 OK Hide 0x531060 h 1 root 127.0.0.1 0 http 31.12.13 12:13:43 00:00:48 0000:0000 00:00:42 OK Readers 0/1 Hide Restart r 1 ***UK ON OFF 127.0.0.1 0 internal 0000:0000 no data 00:00:48 ERROR (no entitlements) Clients 1/1 (1 with ECM within last 25 seconds) Hide Kill c 1 linuxsat ON ON 127.0.0.1 1864 newcamd (CCcam) 31.12.13 12:14:09 00:00:22 0963:CC01 (1ms) by not found 00:00:06 OK 2013/12/31 12:13:43 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9163 (mipsel-unknown-linux-gnu) 2013/12/31 12:13:43 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1065 2013/12/31 12:13:43 0 s services reloaded: 0 services freed, 20 services loaded, rejected 0 2013/12/31 12:13:43 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled 2013/12/31 12:13:43 0 s signal handling initialized 2013/12/31 12:13:43 0 s 37 tier-id's loaded 2013/12/31 12:13:43 0 s 1000 provid's loaded 2013/12/31 12:13:43 0 s newcamd: initialized (fd=7, port=10000) 2013/12/31 12:13:43 0 s -> CAID: 0963 PROVID: 000000 2013/12/31 12:13:43 0 s ***UK [internal] creating thread for device /dev/sci0 2013/12/31 12:13:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat 2013/12/31 12:13:43 0 s waiting for local card init 2013/12/31 12:13:43 531060 h webif: decompressed 56210 bytes back into 162152 bytes 2013/12/31 12:13:43 531060 h HTTP Server running. ip=0.0.0.0 port=8888 2013/12/31 12:13:43 52F148 r ***UK [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357) 2013/12/31 12:13:44 52F148 r ***UK [internal] card detected 2013/12/31 12:13:45 52F148 r ***UK [internal] ATR: 3F removed 2013/12/31 12:13:45 52F148 r ***UK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2 2013/12/31 12:13:45 52F148 r ***UK [internal] Calculated work ETU is 18.60 us reader mhz = 500 2013/12/31 12:13:45 52F148 r ***UK [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz) 2013/12/31 12:13:47 52F148 r ***UK [internal] card system not supported 2013/12/31 12:13:47 52F148 r ***UK [internal] Normal mode failed, reverting to Deprecated Mode 2013/12/31 12:13:49 52F148 r ***UK [internal] ATR: 3F removed 2013/12/31 12:13:49 52F148 r ***UK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2 2013/12/31 12:13:49 52F148 r ***UK [internal] Calculated work ETU is 74.40 us reader mhz = 500 2013/12/31 12:13:49 52F148 r ***UK [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz) 2013/12/31 12:13:52 52F148 r ***UK [internal] card system not supported 2013/12/31 12:13:52 52F148 r ***UK [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1 2013/12/31 12:13:52 52F148 r ***UK [internal] card initializing error 2013/12/31 12:13:52 0 s init for all local cards done 2013/12/31 12:13:52 0 s anti cascading disabled 2013/12/31 12:14:09 551DA8 c client connected to 10000 port 2013/12/31 12:14:09 551DA8 c encrypted newcamd:10000-client 127.0.0.1 granted (linuxsat, au=on (1 reader)) 2013/12/31 12:14:09 551DA8 c user linuxsat authenticated successfully (CCcam) 2013/12/31 12:14:09 551DA8 c AU disabled for user linuxsat 2013/12/31 12:14:14 551DA8 c linuxsat (0963&000000/FFFF/CC01/5F:2CEABAB98D9435E8D71C7FE3042FD77B): rejected group (0 ms) (no matching reader) 2013/12/31 12:14:19 551DA8 c linuxsat (0963&000000/FFFF/CC01/5F:A57B203889F25655236DBE7B89253251): rejected group (1 ms) (no matching reader) 2013/12/31 12:14:25 551DA8 c linuxsat (0963&000000/FFFF/CC01/5F:ED5A50F39CA2742BF20872A13F3C9421): rejected group (1 ms) (no matching reader) Switch Debug from 0 to 0 1 2 4 8 16 32 64 128 256 512 1024 2048 4096 ALL OSCAM Webinterface developed by Streamboard Team - 31.12.13 12:14:31 | Access from 192.168.0.7 Start: 31.12.13 - 12:13:43 | UpTime: 00:00:48 | Process ID: 1065 WebIf Style by -
I use 7zip to extract files, you may need to do it twice.
I use winrar -
All latest oscams on download.oscam.cc are compressed so 353k is normal
Use the oscam link on navbar above beside "Live on Sat"
Navigate to Home / 1.20_TRUNK / mips-tuxbox-oe2.0
and try latest..should i be using oe2.0 on such an old image?
-
Hi All,
Looking for a bit of help with this issue, I have a DM800HD running black hole phoenix edition. I have downloaded the oscam 6059 and cccam from the linuxsat addons panel in TS panel.
This works ok, reads the card and can share it to my other box no problems.Now the problem is that I have the Irish channels RTE, this has intermittent scrambling but I am aware that the latest oscam solves this issue.
So I stop oscam by changing emu to common interface. Unzip and FTP oscam-svn9162-mips-tuxbox-webif-Distribution.tar.gz to /usr/bin and change attributes to 755.
(I have noticed that the size of original oscam was 815kb this one is only 353kb)Log attached below if anyone can see what I am doing wrong.
PHP
Display MoreOSCAM 1.20-unstable_svn build r9037 STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status Hide 0x51adf0 s 0 root 127.0.0.1 0 server 31.12.13 01:27:29 00:00:13 0000:0000 00:00:13 OK Hide 0x525f38 h 1 root 127.0.0.1 0 http 31.12.13 01:27:29 00:00:13 0000:0000 00:00:05 OK Readers 0/1 Hide Restart r 1 ***UK ON OFF 127.0.0.1 0 internal 0000:0000 no data 00:00:13 ERROR (no entitlements) 2013/12/31 01:27:29 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9037 (mipsel-unknown-linux-gnu) 2013/12/31 01:27:29 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 13321 2013/12/31 01:27:29 0 s services reloaded: 0 services freed, 20 services loaded, rejected 0 2013/12/31 01:27:29 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled 2013/12/31 01:27:29 0 s signal handling initialized 2013/12/31 01:27:29 0 s 37 tier-id's loaded 2013/12/31 01:27:29 0 s 1000 provid's loaded 2013/12/31 01:27:29 0 s newcamd: initialized (fd=7, port=10000) 2013/12/31 01:27:29 0 s -> CAID: 0963 PROVID: 000000 2013/12/31 01:27:29 0 s ***UK [internal] creating thread for device /dev/sci0 2013/12/31 01:27:29 0 s loadbalancer: can't read from file /tmp/.oscam/stat 2013/12/31 01:27:29 0 s waiting for local card init 2013/12/31 01:27:29 525F38 h webif: decompressed 54551 bytes back into 156136 bytes 2013/12/31 01:27:29 525F38 h HTTP Server running. ip=0.0.0.0 port=8888 2013/12/31 01:27:29 524018 r ***UK [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357) 2013/12/31 01:27:30 524018 r ***UK [internal] card detected 2013/12/31 01:27:32 524018 r ***UK [internal] ATR: 3F REMOVED 2013/12/31 01:27:32 524018 r ***UK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2 2013/12/31 01:27:32 524018 r ***UK [internal] Calculated work ETU is 18.60 us 2013/12/31 01:27:32 524018 r ***UK [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz) 2013/12/31 01:27:35 524018 r ***UK [internal] card system not supported 2013/12/31 01:27:35 524018 r ***UK [internal] Normal mode failed, reverting to Deprecated Mode 2013/12/31 01:27:36 524018 r ***UK [internal] ATR: 3F REMOVED 2013/12/31 01:27:36 524018 r ***UK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2 2013/12/31 01:27:36 524018 r ***UK [internal] Calculated work ETU is 74.40 us 2013/12/31 01:27:36 524018 r ***UK [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz) 2013/12/31 01:27:39 524018 r ***UK [internal] card system not supported 2013/12/31 01:27:39 524018 r ***UK [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1 2013/12/31 01:27:39 524018 r ***UK [internal] card initializing error 2013/12/31 01:27:39 524018 r ***UK [internal] card initializing error 2013/12/31 01:27:40 0 s init for all local cards done 2013/12/31 01:27:40 0 s anti cascading disabled 2013/12/31 01:27:55 54DB90 c client connected to 10000 port 2013/12/31 01:27:55 54DB90 c encrypted newcamd:10000-client 127.0.0.1 granted (linuxsat, au=on (1 reader)) 2013/12/31 01:27:55 54DB90 c user linuxsat authenticated successfully (CCcam) 2013/12/31 01:27:55 54DB90 c AU disabled for user linuxsat 2013/12/31 01:27:58 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:E19E63AEEB36845BCCC2369925AF56A4): rejected group (0 ms) (no matching reader) 2013/12/31 01:28:04 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:E3A88ADC2AF92381BD05190780CB7E4E): rejected group (1 ms) (no matching reader) 2013/12/31 01:28:12 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:57BF4C723873E95422865DE6F0B39552): rejected group (1 ms) (no matching reader) 2013/12/31 01:28:20 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:0872C5D4507440FBC85685C1A13DE32A): rejected group (1 ms) (no matching reader) 2013/12/31 01:28:28 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:89D8B841B56E8F71DC97CCFF2D5FF7DC): rejected group (1 ms) (no matching reader) 2013/12/31 01:28:36 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:36E247D990E12FA0DADACA42E81EA3FF): rejected group (1 ms) (no matching reader) 2013/12/31 01:28:44 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:E35C84097CE386819F3E367798B1E531): rejected group (1 ms) (no matching reader) 2013/12/31 01:28:52 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:F1F86A2571C7A21242B261A4643EF2B5): rejected group (1 ms) (no matching reader) 2013/12/31 01:29:00 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:AE094A24565B757064C461C3DE1B1E43): rejected group (0 ms) (no matching reader) 2013/12/31 01:29:08 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:FB9780AEFFF3E087C0516D683EDD365E): rejected group (0 ms) (no matching reader) 2013/12/31 01:29:16 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:78E2B886E05A45448CB871FFC5CE2F0C): rejected group (0 ms) (no matching reader) 2013/12/31 01:29:24 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:E5242BD75126A6514A39FA907B07C5F0): rejected group (1 ms) (no matching reader) 2013/12/31 01:29:32 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:60ED8FF894FDEFEB454ED42B482D3B3D): rejected group (0 ms) (no matching reader) 2013/12/31 01:29:40 54DB90 c linuxsat (0963&000000/FFFF/C7AD/5F:30317B2BECBB3AA2A79FEA7DCA07A22D): rejected group (0 ms) (no matching reader) -
Display More
hi guys. this is my first attempt at a backup so go easy on me.
this is the new pli judder free for 8900.
it has most of the usual plugins we want + iv added a few tweaks.
https://www.dropbox.com/s/9uvmdr7yt1dqdk8/back_of_e2.rarAdded:
28.2 list
Autobouquets
Cooltvguide 6.4
Rats picon updates
Ts media
Sportmax
Java iptv updates
Skin: kr carbo hdDoes this have 1channel plugin?
-
The OP is in the west of Ireland, He will be able to pick some transponders up on a *** dish but you will not get all of the bird.
If you were looking for a set transponder on Hotbird you should be able to get it but you would be better of with a 60cm or 80cm dish to get all the channels.
