Posts by Verdeoro

Quote from percuk

eutelsat 7 east

12678V 7120

EFL HIGHLIGHTS

BISS KEY PLEASE

CW: 53 23 CF 45 32 88 42 FC

Oscam 2.26.01-11911-802 emu-icam-ipv6 ARM _Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.26.01-11911-802 emu-icam-ipv6 MIPSEL_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.26.01-11911-802 emu-icam-ipv6 AARCH64_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

CCcam.cfg reading to OSCam

Support for TVSat 183E

Build by VeRDe

11911
* Fix CMake project warning
call cmake_minimum_required before project

11910
dvbapi: add serverip setting to bind listener to specific IP address
* add dvbapi_srvip configuration option to bind TCP listener to a
  specific IP address instead of all interfaces (ADDR_ANY)
* supports both IPv4 and IPv6 addresses
* default: none (binds to all interfaces, same behavior as before)
* add webif configuration and documentation
(thx Basic.Master)

11909
copyright: bump copyright year to 2026 

11908
streamrelay: improve ecm_mode handling
* add get_ecm_mode() inline function to extract the lower nibble from
  last ECM byte for VideoGuard CAIDs
* move select_csa_alt() from module-dvbapi.c to globals.h for shared use
* allow empty CAID setting in streamrelay config to autodetect csa-alt ecm
* disconnect stream client immediately when CAID is not allowed
* fix "caid not enabled" log message to show actual CAID instead of FFFE
* log ecm_mode changes and libdvbcsa table feedback (if available)
* simplify streamrelay support output in version info
* add msgid to DVBAPI_ECM_INFO message, so the client can correctly assign the ecm information to the requesting service

Thanks tem_invictus and WXbet

7.0°E

11070 H 7200

4:2:0

ID: Service1

Event: Euroleague - Bayern Monaco vs Maccabi Tel Aviv

CW: E7 3E 1E 43 48 11 5C B5

Quote from bayuware

Hotbird 13B ( 13E )

12608 Vertical 9700

DVB-S2 - 4:2:0 - 8PSK

ID: Spengler Cup 2025

Event: Ice Hockey - Spengler Cup 2025

any CW please?

Display More

CW: E4 7F F4 57 6D 12 26 A5

01 B95E83EFBD3AA1

00 BC3409182F89EF

Quote from Windhoos

7e 11043 H 4937 Auto QPSK

CW please

CW: E3 64 6F B6 20 FC CA E6

Oscam 2.25.12-11907-802 emu-icam-ipv6 ARM _Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.25.12-11907-802 emu-icam-ipv6 MIPSEL_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.25.12-11907-802 emu-icam-ipv6 AARCH64_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

CCcam.cfg reading to OSCam
Support for TVSat 183E

Webif style color Red_Grey/ Dark_Grey/ Dark_Grey_V2/ Blue_Shadow.

Note: Clear your internet history to view the new webif!

Build by VeRDe

Regards

Oscam 2.25.12-11907-802 emu-icam-ipv6 ARM _Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.25.12-11907-802 emu-icam-ipv6 MIPSEL_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.25.12-11907-802 emu-icam-ipv6 AARCH64_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

CCcam.cfg reading to OSCam
Support for TVSat 183E

Build by VeRDe

dvbapi: add support for more net send clients 

* connections established with client_proto_version = 3 and extended_cw_api >= 1 can now also process CW_ALGO_CSA_ALT independently
* proper handling of dvbapi_ioctl commands in this case
* fix rerouting of msgid back to client
* support each videoguard caid
* make sure ecm.info is created

Thanks WXbet

Eutelsat 16A @ 16.0E

12654 Vertical 7200

1920x1080 |8PSK |4:2:0 HD

ID: F511-PROD2-AIX-MAIN

Event: Rugby Pro D2 - Provence vs Beziers

CW: F5 11 33 39 9F EE D1 5E

Eutelsat 16A @ 16.0E
12646 Vertical 72001920x1080 |8PSK |4:2:0 HD

ID: LNR PRO D2 OYONNAX VS NEVERS

Event: Rugby Pro D2 - Oyonnax vs Nevers

CW: F5 77 33 9F 9F EE D1 5E

Quote from Wolfy24

French D2 Rugby

Valence romans v Grenoble

16e

12510 V 7200

4:2:0

Biss key please?

Display More

CW: F5 12 33 3A 9F EE D1 5E

00 540252F49C1E6E

01 94CEB413392332

Quote from krzys1

Eutelsat 7B / Eutelsat 7C 7° E

12594 V 9600

ID: POL-080 Beckup

CW PLEASE

CW: 20 25 A9 EE 97 AB DA 1C

Oscam 2.25.11-11906-802 emu-icam-ipv6 ARM _Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.25.11-11906-802 emu-icam-ipv6 MIPSEL_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.25.11-11906-802 emu-icam-ipv6 AARCH64_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

CCcam.cfg reading to OSCam

Build by VeRDe

* Oscam 2.25.11-11906-802 2nd Version.

Added support for TVSat 183E. Thanks to @benhur for patch.
Added new Webif style color Dark.

Compiled by Levi45

Oscam icam patch 11906 with emu r803 ipk/deb for all e2/sh4 boxes and images

Added support for Tivusat-183E thanks for who ever done the patch and thanks @lululla my friend

Thanks Levi45

00 AAD431932E8012

01 468509CC2F1AE3

Quote from Stefano Caironi

Eutelsat 7 est

11138V 4999

Rai it

Key???

Display More

CW: DE 76 B1 05 07 A8 2A D9

Oscam 2.25.11-11906-802 emu-icam-ipv6 ARM _Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.25.11-11906-802 emu-icam-ipv6 MIPSEL_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.25.11-11906-802 emu-icam-ipv6 AARCH64_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

CCcam.cfg reading to OSCam

Webif style color Red_Grey/ Dark_Grey/ Dark_Grey_V2/ Blue_Shadow.

Note: Clear your internet history to view the new webif!

Build by VeRDe

Regards

Oscam 2.25.11-11906-802 emu-icam-ipv6 ARM _Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.25.11-11906-802 emu-icam-ipv6 MIPSEL_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

Oscam 2.25.11-11906-802 emu-icam-ipv6 AARCH64_Open SSL 3.2.1/3.3.0/3.3.1/3.3.2/3.4.0/3.4.1/3.5.0/3.5.2/3.6.0 (only bin)

CCcam.cfg reading to OSCam

Build by VeRDe

* Use fixed-width 64-bit integer format macros

Replaced all hardcoded %lld format specifiers with the portable
inttypes.h macros PRId64 (for printing) and SCNd64 (for scanning).
This ensures correct 64-bit integer handling across 32-bit and
64-bit systems, improves cross-platform compatibility, and avoids
potential issues with long long size differences on various compilers
or architectures.

Thanks tem_invictus