Posts by ste141

Sorry for late reply guys. Everythings working fine with the reader on windows so ill just stick with this setup, although ecm times are a little higher than on linux, but i can live with that.

Thanks for your help:)

Thread can now be closed.

Well...i've had some success finally :)

Working absolutely fine on oscam x86_64-pc-cygwin verison / Win10 OS. No issues reading the card and most importantly, restarting the reader in oscam!

the device wasn't '/dev/ttyUSB0' and not even USB1, 2 or 3. I had a quick search around and found that I needed to use the unlimited reader software found on the manufacturers website, to put the reader in VCP (Virtual COM Port) mode, and then I was able access it on oscam using 'device = dev/ttyS2'.

I've never used oscam in cygwin enviroment before but hopefully it will work and run the card just as well as in linux.

I will post back again once i've tested it out completely and let you know the results.

I'm gonna try oscam on a windows pc......wish me luck!

No good news unfortunately!

'detect = !cd' in config while still using 'device = /dev/ttyUSB0' just gives the following and does not read the card

'2024/08/24 15:39:51 4F4A6301 r (reader) infinity [mouse] Reader initialized (device=/dev/ttyUSB0, detect=!cd, mhz=369, cardmhz=369)'

-----------------------------------------------------------

root@debian:~# ls /dev/serial/*/*

device = /dev/serial/by-id/usb-WB_Electronics_Infinity_USB_Unlimited-if00-port0

/dev/serial/by-path/pci-0000:00:14.0-usb-0:4:1.0-port0

Using 'detect = !cd' & 'device = /dev/serial/by-id/usb-WB_Electronics_Infinity_USB_Unlimited-if00-port0' just gives the same as above, detects reader but does not read card.

I tried all the different options for card detect that oscam lists in the reader config 'cd (default), cts, dsr, ring, none' all without any success:(

Lastly using 'device = /dev/serial/by-id/usb-WB_Electronics_Infinity_USB_Unlimited-if00-port0' and the default 'detect = cd' behaves same as first post

jenseneverest Thank you very much for your reply but no luck unfortunately:( I already had simplebuild on my debian pc, so I build the latest oscam and still behaving the same. Also, restarting oscam doesn't do anything, as i say the only way to get the reader working again is to manually unplug and plug in again.

I thought I'd share the full picture -

2024/08/24 12:05:09 00000000 s (main) init for all local cards done

2024/08/24 12:05:09 00000000 s (emmcache) loaded 0 emmcache records from /usr/local/etc/oscam.emmcache in 0 ms

2024/08/24 12:05:09 00000000 s (emmcache) loaded 0 emmstat records from /usr/local/etc/oscam.emmstat in 0 ms

2024/08/24 12:05:09 00000000 s (gbox) local gbox failed init

2024/08/24 12:06:07 281B6848 h (reader) infinity [mouse] Restarting reader

2024/08/24 12:06:07 281B6848 h (reader) infinity [mouse] creating thread for device /dev/ttyUSB0

2024/08/24 12:06:07 281B6848 h (webif) reader infinity enabled by WebIf

2024/08/24 12:06:07 125324D3 r (reader) infinity [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)

2024/08/24 12:06:07 125324D3 r (reader) infinity [mouse] card detected

2024/08/24 12:06:08 125324D3 r (reader) infinity [mouse] ATR: 3B 24 00 30 42 30 30

2024/08/24 12:06:08 125324D3 r (reader) infinity [mouse] Setting baudrate to 9919 bps

2024/08/24 12:06:09 125324D3 r (reader) infinity [mouse] type: Conax, caid: 0B02, serial: ##########, hex serial: ########, card: v64

2024/08/24 12:06:09 125324D3 r (reader) infinity [mouse] Providers: 1

2024/08/24 12:06:09 125324D3 r (reader) infinity [mouse] Provider: 1 Provider-Id: 000000

2024/08/24 12:06:09 125324D3 r (reader) infinity [mouse] Provider: 1 SharedAddress: ########

2024/08/24 12:06:09 125324D3 r (reader) infinity [mouse] Pairing is not active

2024/08/24 12:06:09 125324D3 r (reader) infinity [mouse] found card system conax

2024/08/24 12:06:09 125324D3 r (reader) infinity [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

2024/08/24 12:06:10 125324D3 r (reader) infinity [conax] Package: 1, id: 1010, classes: 01000001, date: 2024/08/01 - 2024/08/31, name: FOCUSSAT-1

2024/08/24 12:06:10 125324D3 r (reader) infinity [conax] Package: 2, id: 1010, classes: 01000001, date: 2024/07/01 - 2024/07/31, name: FOCUSSAT-1

2024/08/24 12:06:10 125324D3 r (reader) infinity [conax] Package: 3, id: 2010, classes: 01001051, date: 2012/07/01 - 2012/07/31, name: ESS

2024/08/24 12:06:10 125324D3 r (reader) infinity [conax] Package: 4, id: 2010, classes: 01001053, date: 2012/06/01 - 2012/06/30, name: ESS

2024/08/24 12:06:10 125324D3 r (reader) infinity [conax] Package: 5, id: 1020, classes: 010000FF, date: 2024/08/01 - 2024/08/31, name: FOCUSSAT-2

2024/08/24 12:06:10 125324D3 r (reader) infinity [conax] Package: 6, id: 1020, classes: 010000FF, date: 2024/07/01 - 2024/07/31, name: FOCUSSAT-2

2024/08/24 12:06:10 125324D3 r (reader) infinity [conax] ready for requests

2024/08/24 12:06:33 281B6848 h (webif) reader infinity disabled by WebIf

2024/08/24 12:06:43 281B6848 h (reader) infinity [conax] Restarting reader

2024/08/24 12:06:43 281B6848 h (reader) infinity [conax] creating thread for device /dev/ttyUSB0

2024/08/24 12:06:43 281B6848 h (webif) reader infinity enabled by WebIf

2024/08/24 12:06:43 7A8ECD43 r (reader) infinity [conax] ERROR: Phoenix_Init returns error

2024/08/24 12:06:44 7A8ECD43 r (reader) infinity [conax] Cannot open device: /dev/ttyUSB0

2024/08/24 12:06:46 7A8ECD43 r (reader) infinity [conax] ERROR: Phoenix_Init returns error

2024/08/24 12:06:46 7A8ECD43 r (reader) infinity [conax] Cannot open device: /dev/ttyUSB0

2024/08/24 12:06:48 7A8ECD43 r (reader) infinity [conax] ERROR: Phoenix_Init returns error

2024/08/24 12:06:48 7A8ECD43 r (reader) infinity [conax] Cannot open device: /dev/ttyUSB0

------------------------------

When the reader is disabled on oscam Its almost seems like debain is keeping the usb device in use when it's not?!

Hi lads,

Got an issue with my new infinity unlimited usb reader on oscam. Setup: Optiplex 3050 mff pc with debian 32bit, Oscam v11724

Cards reads OK but then when I restart the reader on oscam, it doesn't read again and gives me the below error in the log, and the only way to get it working again is to manually unplug the reader and plug back in.

[mouse] ERROR: Phoenix_Init returns error

My config -

[reader]

label = infinity

protocol = mouse

device = /dev/ttyUSB0

caid = 0B02

detect = cd

mhz = 369

cardmhz = 369

group = 1

I've looked all over the web for a solution to no avail. I know its not a faulty reader has I have 2 more of these unlimited readers and all 3 do the same.

Any help on this would be greatly appreciated!

Thanks,

Ste

Not looking for the 5402 only ones i mentioned in the title but thanks anyway.

Update....still looking for one of these receivers

I know its a blast from the past, but does anyone have one of the above receivers lying about they are not using anymore? willing to pay ££

the only files I have in /etc/epgimport/ are -

readme

rytec.sources

spainKoala.sources

I am using vix image if that helps

Hi guys,

I need some help!

Have 2 services - 1 with epg data and 1 without it, they are same channels just different sids and transponders

I currently get my epg data from rytec sources on crossepg

Is there any way of getting the epg data to show on both services?

Thanks in advance,

Ste

I'm not entirely sure what you mean but the image i'm using can be downloaded from the site https://www.raspberrypi.org/downloads/raspbian/

2019-07-10-raspbian-buster-lite, that is the latest image I downloaded from the official raspberrypi site. I've tried with the full version as well and getting the same issue.

Everytime I run the command I seem to get a different outcome, for example I just ran it again and got this -

root@raspberrypi:~# cd /usr/src

root@raspberrypi:/usr/src# svn co http://www.streamboard.tv/svn/oscam/trunk oscam-svn

A oscam-svn/Distribution

A oscam-svn/Distribution/doc

A oscam-svn/Distribution/doc/html

A oscam-svn/Distribution/doc/man

A oscam-svn/Distribution/doc/txt

A oscam-svn/Distribution/doc/man/oscam.provid.5

A oscam-svn/Distribution/doc/man/oscam.user.5

A oscam-svn/module-dvbapi.c

A oscam-svn/Distribution/doc/man/oscam.ac.5

svn: E200014: Checksum mismatch for '/usr/src/oscam-svn/Distribution/doc/txt/oscam.conf.txt':

expected: 101ca62dc977f0acc5546c0229ee995f

actual: 14679370e0282c6ec38123051f62b03e

mirodvd They are the exact steps i've already taken and I'm running the svn co http://www.streamboard.tv/svn/oscam/trunk oscam-svn command as root. I'm doing all the commands as root from when he tells you to in that guide.

Im trying to install oscam on the lastest rasbian-buster-lite following this guide Oscam server setup guide - Raspberry Pi from scratch.

Everything has gone well upto when I do svn co http://www.streamboard.tv/svn/oscam/trunk oscam-svn

this is what I get:

A oscam-svn/Distribution

A oscam-svn/Distribution/doc

A oscam-svn/Distribution/doc/html

A oscam-svn/Distribution/doc/man

A oscam-svn/Distribution/doc/txt

A oscam-svn/Distribution/doc/html/oscam.conf.5.html

A oscam-svn/Distribution/doc/man/list_smargo.1

A oscam-svn/Distribution/doc/man/oscam.whitelist.5

svn: E200014: Checksum mismatch for '/usr/src/oscam-svn/Distribution/doc/html/oscam.server.5.html':

expected: 2819e8faf699c1af15701053f2e0b975

actual: a6d41ea4d61500e54b5ff07d923826f7

I've ftp'd into the oscam-svn folder and it's not downloaded all the files from the web directory only the files above , does anyone have any idea why this would be?

Any help on will be greatly appreciated!

I've had a funny one on my conax nc+ card a few weeks ago I lost some channels but not all e.g Nat geo wild, Comedy central, tnt and more. My supplier has refreshed the card 3 times now with no luck. I'm receiving all the EMM's so I know its not that. Tried 2 different receivers and latest version of oscam. Its not the RSA as when I delete it from oscam I lose all channels.

Don't suppose anyone else had simlar issue?

I don't think the nc+ nagra cards are shareable.

Full Activation of the card only takes upto 2 hours. I think you should ask your supplier to resend activation make sure you stay on TVP 1 HD for 2 hours when they send it also make sure blockemm-u = 0 is set. After 2 hours then check you are able to receive all channels you have paid for.

Remember though to set back to blockemm-u = 1 after your package activation is successful.

Here is the config for nc+ conax card working 100% once you have the rsa.

[reader]

label = smart

protocol = pcsc

device = 0

caid = 0b01

rsakey = (you will receive this from your supplier)

detect = cd

group = 1

emmcache = 1,3,2

blockemm-unknown = 1

blockemm-u = 1

blockemm-g = 1

As I said to you in pm allow unique emm only to activate the card then block uq emm after activation.

Tehwiz will definitely send you the rsa with your conax card well in my case they emailed it to me. Wish I had just renewed my conax card now last year instead of getting a seca one it was just cheaper to get that with full pacakage at the time than renewing my conax card.

They have asked me send them the seca card back to check it but have said it is likely nc have stopped it.

Not even sure if nc is planning to eventually be narga only and get rid of conax has anyone heard anything on this?