Posts by ste141

Hello everyone its good to be back been away for a while.

As stated in previous post when I set au = MTV,skyuk will auto select MTV when I save config. Would setting au = 1 be the solution for updating 2 cards without having to select one or the other every time I want to update a card ?

Asking to get caught having a banner like that on the shop front don't see how someone can be so stupid!

Turned out it was a internal networking problem that was causing the disconnects.

Yes same on mine they are not very good quality display, for such a high end receiver you expect better but anyway still an awesome piece of kit!

Thanks i'll try that when I get home from work.

It odd because I didn't have any disconects for the few hours I was watching tv last night before I went to bed but then when I put my box in standby about 15 minutes later I looked and I had disconnects. I know all clients disconnected a few times between 4.30am-5am then I had one reader disconnect at 6:47 then no client or reader disconnects since.

Also what info do I need to add for dvbapi?

vu+ duo2 mate

Well i've done a reflash and i've got rid of the unauthorized access problem but still getting both client and reader disconnects. I've also changed router with no luck. So after all that it must be something in my config even though I spoke to someone and they said my config was fine.

Here is my config:

oscam.conf
[global]
nice = -1
logfile = /var/log/oscam.log
disablelog = 1
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[newcamd]
port = 10001@0963:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1

[webif]
httpport = 8888
httpuser = linuxsat
httppwd = xxxxx
httprefresh = 15
httpshowpicons = 1
httpallowed = 192.168.0.0-255.255.255.255

[dvbapi]
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1

[cccam]
port = xxxxx
version = 2.1.3
build = 3165
reshare = 1

oscam.server
[reader]
label = MTV
protocol = internal
device = /dev/sci1
caid = 0B00
detect = cd
mhz = 450
cardmhz = 2700
ident = 0B00:000000
group = 1
emmcache = 1,3,2,0

[reader]
label = smart
protocol = internal
device = /dev/sci0
caid = 0B01
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
detect = cd
mhz = 450
cardmhz = 2700
ident = 0B01:000000
group = 2
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
auprovid = 000B01

[reader]
label = xxxxxxxxxxxxxxxxx
description = xxxx
protocol = cccam
device = xxxxxxxxxxxxxxxxx
user = xxxx
password = xxxx
inactivitytimeout = 5
group = 4
cccversion = 2.0.11
cccmaxhops = 3
ccckeepalive = 1
cccreshare = 1
cccreconnect = 5000
audisabled = 1
(same config for every cccam reader)

oscam.user

[account]
user = linuxsatsupport
au = 1
group = 1,2,3,4,5
keepalive = 1

[account]
user = xxxx
pwd = xxxx
hostname = xxxxxxxxxxxx
group = 1,2,4,5
cccmaxhops = 3
cccreshare = 1
cccignorereshare = 1
keepalive = 1
(same config for every client)

Tearing my hair out over this now!

Any help would be really appreciated.

That's only for the reader anyway i'm getting both reader and client disconnects really annoying me now!

- - - Updated - - -

Changed to version 10077 still the same. Any ideas anyone?

I'll try that mate but first would it be anything to do with inactivitytimeout = 30?

Admin can you please remove the one peer name I forgot to blank out.

Many thanks

- - - Updated - - -

Latest version of oscam got rid of skipped duplicate log lines but i'm disconnects every 20 minutes or so.

Getting a lot of peer disconnects and duplicate log lines on my log.

2015/05/10 05:40:33 5F9A70 c XXX disconnected from XXXX
•	2015/05/10 04:46:42 5B3B58 p xxxxxx [cccam] disconnected: reason disconnect
•	2015/05/10 04:46:52 5B3B58 p xxxxxx [cccam] connecting to xxxxxx
•	2015/05/10 04:46:53 5E1E08 c encrypted cccam-client xxxx granted (xxx, au=off)
•	2015/05/10 04:48:38 76A00468 h unauthorized access from 127.0.0.1
•	2015/05/10 05:00:38 0 --- Skipped 1 duplicated log lines ---
•	2015/05/10 05:06:37 0 --- Skipped 1 duplicated log lines ---
•	2015/05/10 05:12:37 0 --- Skipped 1 duplicated log lines ---
•	2015/05/10 05:18:37 0 --- Skipped 1 duplicated log lines ---
•	2015/05/10 05:22:13 0 --- Skipped 1 duplicated log lines ---
•	2015/05/10 05:22:13 5B3B58 p xxxxxx [cccam] disconnected: reason disconnect
•	2015/05/10 05:22:21 5B3B58 p xxxxxx[cccam] connecting to xxxxxx
•	2015/05/10 05:22:27 5C97B0 c encrypted cccam-client xxxx granted (xxx), au=off)
•	2015/05/10 05:24:37 76A00468 h unauthorized access from 127.0.0.1
•	2015/05/10 05:36:36 0 --- Skipped 1 duplicated log lines ---
•	2015/05/10 05:40:33 0 --- Skipped 1 duplicated log lines ---
•	2015/05/10 05:40:33 5F9A70 c xxxxx disconnected from xxxx
•	2015/05/10 05:40:37 5E0A78 c encrypted cccam-client xxxx granted (xxx, au=off)
•	2015/05/10 05:41:00 5C9700 c encrypted cccam-client xxxx granted (xxx, au=off)

Been getting this all through the night with both my peers but one of them say there as been no disconnects his end.

Any help will be appreciated.

Yes they did

I can highly recommend the nc+ viewing card. Lot of channels with english content at a very reasonable price even for full package.

This is the one I got: http://www.ebay.co.uk/itm/NC-FAST-CONAX-CARD-RSA-FULL-PACKAGE-12-MONTHS-TEHWIZ-/271846879432?pt=LH_DefaultDomain_3&hash=item3f4b5630c8

No card has been in my duo2 for last 3 months and with same working config up til now.

- - - Updated - - -

This is my tiers file
0960,0961,0963:0003 | FTV
0960,0961,0963:000B | FTV
0960,0961,0963:0010 | Entertainment Pack
0960,0961,0963:001D | BBC Freesat From Sky
0960,0961,0963:0024 | Premier Sports
0960,0961,0963:0039 | Premier Sports
0960,0961,0963:0047 | BoxNation
0960,0961,0963:005B | BT Sport
0960,0961,0963:005C | BT Sport HD
0960,0961,0963:2590 | Setanta Sports ROI
0960,0961,0963:7757 | Primetime PPV On demand enabled
0960,0961,0963:30E1 | Sky Movies 1
0960,0961,0963:30E2 | Sky Movies 2
0960,0961,0963:30E3 | Sky Sports 1
0960,0961,0963:30E4 | Sky Sports 2
0960,0961,0963:30E5 | Sky Sports 3
0960,0961,0963:B732 | Sky Movies 1+2
0960,0961,0963:B736 | SBO on Demand
0960,0961,0963:B73B | MUTV
0960,0961,0963:B765 | Five Freesat From Sky
0960,0961,0963:B766 | Channel 4 Freesat From Sky
0960,0961,0963:B772 | FTV
0960,0961,0963:B773 | FTV
0960,0961,0963:B846 | SBO on Demand
0960,0961,0963:B860 | FTV
0960,0961,0963:B8C0 | FTV
0960,0961,0963:B8D2 | HD pack
0960,0961,0963:B968 | Anytime+
0960,0961,0963:B991 | ESPN
0960,0961,0963:B9FB | Sky 3D

- - - Updated - - -

This my config that was working fine yesterday and have changed nothing since!

- - - Updated - - -

Could my card of changed to caid 0960 or is that even possible?

I just dont understand why it would of stopped decoding all of a sudden.

- - - Updated - - -

Sorted it had to take out I:0 from oscam.dvbapi. Still don't understand why because all was working with that line the other day.

Thread can be closed now.

2015/05/03 20:52:38 0 s (main) init for all local cards done
2015/05/03 20:52:38 0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/05/03 20:52:38 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/05/03 20:52:38 0 s (anticasc) anti cascading disabled
2015/05/03 20:52:38 559208 c (client) plain dvbapi-client granted (linuxsatsupport, au=auto (2 reader))
2015/05/03 20:52:38 559208 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2015/05/03 20:52:38 559208 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 0963 ECM_PID: 0525 PROVID: 000000
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 0961 ECM_PID: 0525 PROVID: 000000
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 0960 ECM_PID: 0525 PROVID: 000000
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 skipped stream CAID: 0963 ECM_PID: 0525 PROVID: 000000 (Same as ECMPID 0)
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 skipped stream CAID: 0961 ECM_PID: 0525 PROVID: 000000 (Same as ECMPID 1)
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 skipped stream CAID: 0960 ECM_PID: 0525 PROVID: 000000 (Same as ECMPID 2)
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 skipped stream CAID: 0963 ECM_PID: 0525 PROVID: 000000 (Same as ECMPID 0)
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 skipped stream CAID: 0961 ECM_PID: 0525 PROVID: 000000 (Same as ECMPID 1)
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 skipped stream CAID: 0960 ECM_PID: 0525 PROVID: 000000 (Same as ECMPID 2)
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in PMT
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 receiver wants to demux srvid 1789 on adapter 0000 camask 0001 index 0000 pmtpid 0112
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 new program number: 1789 (0963:1789 unknown) [pmt_list_management 3]
2015/05/03 20:52:39 559208 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/05/03 20:52:42 559208 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

This is ignoring

I: 0961:000000
I: 0960:000000

Still the same unfortunately already had P: 0963:000000 in oscam.dvbapi.

- - - Updated - - -

literally was watching nat geo last night before I went to sleep then woke up this morning and nothing was working.

Yes sorry should of post full log first here it is anyway.

2015/05/03 20:00:12 55A368 r (reader) SKYUK [videoguard2] card detected
2015/05/03 20:00:13 558D70 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/03 20:00:13 55A368 r (reader) SKYUK [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2015/05/03 20:00:13 55A368 r (reader) SKYUK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/05/03 20:00:13 55A368 r (reader) SKYUK [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/05/03 20:00:16 558D70 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/03 20:00:16 55A368 r (reader) SKYUK [internal] Buffers readed 0 bytes total time_us 3099613
2015/05/03 20:00:17 55A368 r (reader) SKYUK [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] Card type: SYAV
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] Rom version: 40LF
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] Credit available on card: 0 euro
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] FuseByte: 25
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] Region Code: ****
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] Country Code: GBR
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] classD1 ins742A: failed
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] Pincode read: ****
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] PCB settings: FF FF E 0
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] type: VideoGuard BSkyB (0963), caid: 0963
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] serial: ########, BoxID: ########, baseyear: 1997
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] ready for requests
2015/05/03 20:00:18 55A368 r (reader) SKYUK [internal] found card system videoguard2
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] card detected
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] type: VideoGuard BSkyB (0963)
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] ------------------------------------------------------------------
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] +---------+----------+---------------------+---------------------+
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 00 ---|-- 0003 --| 2015/06/21-01:00:00 | FTV
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 00 ---|-- 000b --| 2015/06/21-01:00:00 | FTV
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 00 ---|-- 0010 --| 2015/06/21-01:00:00 | Entertainment Pack
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 00 ---|-- 001d --| 2015/06/21-01:00:00 | BBC Freesat From Sky
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 0d ---|-- 0d65 --| 2015/05/16-01:05:46 |
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 0d ---|-- 0d66 --| 2015/05/16-01:05:46 |
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 0d ---|-- 0d72 --| 2015/05/16-01:05:46 |
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 0d ---|-- 0d73 --| 2015/05/16-01:05:46 |
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 0e ---|-- 0e48 --| 2015/06/06-01:05:48 |
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 0e ---|-- 0e46 --| 2015/06/06-01:05:48 |
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 0e ---|-- 0e60 --| 2015/06/06-01:05:48 |
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] |-- 0e ---|-- 0ed2 --| 2015/06/06-01:05:48 |
2015/05/03 20:00:18 55A368 r (reader) SKYUK [videoguard2] ------------------------------------------------------from-ins70--
2015/05/03 20:00:19 558D70 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/03 20:00:37 558D70 c (-) -- Skipped 6 duplicated log lines --
2015/05/03 20:00:37 558D70 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 0960 ECM_PID: 0503 PROVID: 000000
2015/05/03 20:00:37 558D70 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 0961 ECM_PID: 0503 PROVID: 000000
2015/05/03 20:00:37 558D70 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 0963 ECM_PID: 0503 PROVID: 000000
2015/05/03 20:00:37 558D70 c (dvbapi) Demuxer 0 skipped stream CAID: 0960 ECM_PID: 0503 PROVID: 000000 (Same as ECMPID 0)
2015/05/03 20:00:37 558D70 c (dvbapi) Demuxer 0 skipped stream CAID: 0961 ECM_PID: 0503 PROVID: 000000 (Same as ECMPID 1)
2015/05/03 20:00:37 558D70 c (dvbapi) Demuxer 0 skipped stream CAID: 0963 ECM_PID: 0503 PROVID: 000000 (Same as ECMPID 2)
2015/05/03 20:00:37 558D70 c (dvbapi) Demuxer 0 found 3 ECMpids and 3 STREAMpids in PMT
2015/05/03 20:00:37 558D70 c (dvbapi) Demuxer 0 receiver wants to demux srvid 1B66 on adapter 0000 camask 0001 index 0000 pmtpid 0107
2015/05/03 20:00:37 558D70 c (dvbapi) Demuxer 0 new program number: 1B66 (0960:1B66 unknown) [pmt_list_management 3]
2015/05/03 20:00:37 558D70 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/05/03 20:00:40 558D70 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Got up this morning and my 0963 card has stopped decoding channels and channels were working perfectly fine yesterday! Can anyone see anything out of the ordinary from my log?

2015/05/03 18:11:03 0 s (main) init for all local cards done
2015/05/03 18:11:03 0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/05/03 18:11:03 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/05/03 18:11:03 0 s (anticasc) anti cascading disabled
2015/05/03 18:11:03 557A98 c (client) plain dvbapi-client granted (linuxsatsupport, au=auto (2 reader))
2015/05/03 18:11:03 557A98 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2015/05/03 18:11:03 557A98 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 0960 ECM_PID: 0500 PROVID: 000000
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 0961 ECM_PID: 0500 PROVID: 000000
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 0963 ECM_PID: 0500 PROVID: 000000
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 skipped stream CAID: 0960 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 0)
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 skipped stream CAID: 0961 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 1)
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 skipped stream CAID: 0963 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 2)
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 skipped stream CAID: 0960 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 0)
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 skipped stream CAID: 0961 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 1)
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 skipped stream CAID: 0963 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 2)
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in PMT
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 receiver wants to demux srvid 1B59 on adapter 0000 camask 0001 index 0000 pmtpid 0103
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 new program number: 1B59 (0960:1B59 unknown) [pmt_list_management 3]
2015/05/03 18:11:03 557A98 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/05/03 18:11:06 557A98 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

I've tried uninstalling oscam and re-installing with no luck also tried the 0963 on it's own without 0b01 card in other reader. I've tried my second 0963 card as well same problem.

Forgot to add I can still see all entitlements and they are updating fine exp June.

Card reactivated all channels working now and entitlements updated in oscam alone:-) Thread can be closed now.

Just noticed something strange on viasat (4.8e) I am actually getting 47-50% signal on the sd channels but no signal on hd, anyone know why this is? Must of only checked HD channels before.