About time there was stock good news
Posts by stevejo
-
-
All you should really need to do is renamew it in ftp client and save it should work if not atleast after a reboot anyway have you maybe got 2 picon folder locations
-
That should be working
-
use ftp and add it to the cccam.cfg in etc folder
-
Use the service reference of the one that does clear ,clear picon cache folder maybe not sure what im age you are using
-
If you are looking for a duo upgrade a solo 2 is a fantastic box and well worth the £239 shed loads of support also
-
Display More
first impressions of the box,
its a box you need lots of patience with,the android side it great if not a bit on the small side with the memoryopenelec via sdcard iv loaded about 6 times just to see how things work but to me is too slow to use as a tv tuner,
to be honest i think once the channels have been sorted on wetek theater id stick with the android side,
still learning yet but its a slow process, still a great box though,maybe theres no stock as a wetek2 is coming out?? lol
Aye maybe they are sorting out the slots on top to put toast in as it gets so hot Mwwwwahahaha
-
OK thanks for the reply, I'll probably wait till its a bit more stable then or look at something else.
Dont get me wrong they are well worth the money and good fun I just would never consider one as a replacement for a main box ,with some luck the issues will be fixed but Its been 3 weeks now with no stock so even that leaves a big question mark hanging over the future of this box
-
It is a nice box to have personally i would not recommend it for viewing everyday it is buggy and things havent been ironed out so far as channels listings etc its something you will find yourself playing with more than viewing , to the point that even at times you reboot and you channel list you did have right is all mixed up again , this is on openelec , android im not so sure about works fine but tv side is limited also , being honest this is not a main device
-
those cards are working on servers, and prob will work for as long as all the white cards are still in service,, then when there are no more white cards out there, then the RED cards will be seen to there best affects,, and wipe out all pay servers, for a while if not good,,,
The red card has nothing to do with the white card being in circulation by the looks of it it will still only be hardware pairing as before so will depend on what its paired to
- - - Updated - - -
I dont actually believe these cards are working at all if sleepysleep can post configs and oscam version along with what is being used as a reader so someone else with a card can try would be nice ,something just isnt adding up at all as anyone I know and trust with a card cant get them going including a very recent attempt by a member here :59:
-
I got one delivered yesterday so stock is slowly coming back
Where did you manage to order bud or is this a back order?
-
Box arrived yesterday. Slapped a 300GB HDD in out of an old sly box, and its going good.
Took half hour or so to set up, with auto bouquets (that I wanted) and auto EPG etc etc. Also with a few other softwares installed.
Very good piece of kit - Would definitely recommend.
Will update with my feelings about it after a week or so, but it feels so good to get those Sly shackles off!!In a week you will have learnt more that you can do with it and be happier
-
Remove the key and in oscam webif make sure the use and reader are both started they should show a pause symbol and not a play symbol
- - - Updated - - -
Your ident is also wrong
- - - Updated - - -
Caid and ident are not really required it will limit you to only 0963 from your line
-
Have had no issues on any kids channels or any others my end my boxes update weekly but wetek doesnt and its fine, dont think any transponders have changed
-
No and yes is your answer , you would need to have trusted peers with au enabled for these cards pointed at the satellites in question , you alone would only point at either satellite
Your entitlements should update in minutes also if you upgraded and all is in order -
That is if this is all correct this info going around is an exact copy of what is there only someone with a card will be able to confirm this so you can post back later your results and tupac123123 also seen as you both have cards available
- - - Updated - - -
the boxkey will need spaced xx xx xx
- - - Updated - - -
I still very much have my doubts about this working :59:
-
http://www.multics.info/thread…d-card.49286/#post-162995
Sorry for the external link but this should answer a few questions
- - - Updated - - -
- 2015/03/31 15:49:55 151EF30 r (reader) slyuk [videoguard2] creating thread for device 0
- 2015/03/31 15:49:55 4C006D90 r (reader) slyuk [videoguard2] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
- 2015/03/31 15:49:56 4C006D90 r (reader) slyuk [videoguard2] PCSC was opened with handle: 1456272011
- 2015/03/31 15:49:56 4C006D90 r (reader) slyuk [videoguard2] card detected
- 2015/03/31 15:49:56 4C006D90 r (reader) slyuk [pcsc] ATR: 3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- 2015/03/31 15:49:57 4C006D90 r (reader) slyuk [pcsc] Card type: SYAV
- 2015/03/31 15:49:57 4C006D90 r (reader) slyuk [pcsc] Rom version: 50LN
- 2015/03/31 15:49:57 4C006D90 r (reader) slyuk [pcsc] Credit available on card: 35 euro
- 2015/03/31 15:49:57 4C006D90 r (reader) slyuk [pcsc] FuseByte: 25
- 2015/03/31 15:49:57 4C006D90 r (reader) slyuk [pcsc] Region Code: DE14
- 2015/03/31 15:49:57 4C006D90 r (reader) slyuk [pcsc] Country Code: GBR
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [pcsc] Pincode read: 0000
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [pcsc] PCB settings: 3F 0 E 0
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [pcsc] Parental control disabled
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [pcsc] type: VideoGuard Unknown Card, caid: 0960
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [pcsc] serial: ########, BoxID: ########, baseyear: 1997
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [pcsc] ready for requests
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [pcsc] found card system videoguard2
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] card detected
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] type: VideoGuard Unknown Card
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] ------------------------------------------------------------------
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] +---------+----------+---------------------+---------------------+
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 00 ---|-- 0003 --| 2015/05/05-01:00:00 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 00 ---|-- 000b --| 2015/05/05-01:00:00 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 00 ---|-- 0010 --| 2015/05/05-01:00:00 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 00 ---|-- 001d --| 2015/05/05-01:00:00 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 00 ---|-- 0057 --| 2015/05/05-01:00:00 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 00 ---|-- 0079 --| 2015/05/05-01:00:00 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 05 ---|-- 05e1 --| 2015/05/05-01:01:32 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 05 ---|-- 05e2 --| 2015/05/05-01:01:32 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 05 ---|-- 05e3 --| 2015/05/05-01:01:32 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 05 ---|-- 05e4 --| 2015/05/05-01:01:32 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 05 ---|-- 05e5 --| 2015/05/05-01:01:32 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 0d ---|-- 0d32 --| 2015/05/05-01:05:46 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 0d ---|-- 0d36 --| 2015/05/05-01:05:46 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 0d ---|-- 0d65 --| 2015/05/05-01:05:46 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 0d ---|-- 0d66 --| 2015/05/05-01:05:46 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 0d ---|-- 0d72 --| 2015/05/05-01:05:46 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 0d ---|-- 0d73 --| 2015/05/05-01:05:46 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 0e ---|-- 0e48 --| 2015/05/05-01:05:48 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 0e ---|-- 0e46 --| 2015/05/05-01:05:48 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 0e ---|-- 0e60 --| 2015/05/05-01:05:48 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] |-- 0e ---|-- 0ed2 --| 2015/05/05-01:05:48 |
- 2015/03/31 15:49:58 4C006D90 r (reader) slyuk [videoguard2] ------------------------------------------------------from-ins70--
- - - Updated - - -
I Think this will put this one to bed can only wait for the cards nothing has changed apart from the lack of cards to confirm this , things do work
-
The software on SD hasnt changed and neither the Thomson box the only changes have been to other boxes , so it interests me to know how oscam has issues opening the card and yet sd boxes will still read the card , can only be the boxkey and only blanks , will never know till one arrives
- - - Updated - - -
They are going to have a real issue if this is as said pairing to sd the security will be very easy to get past
-
IF I was you I would sell the clone and get an original and you can use a duo 2 remote on it if you fancy a nicer remote for £25 extra , cut your losses now instead of throwing money away once more
- - - Updated - - -
I still use my original solo 2 remote , it works and does my tv also
-
Try another remote if you can borrow one to make sure its the remote , with this box being as you think a clone it might be the box its self , another check is to use the camera on your phone and see if its hit and miss with some buttons by looking at the ir sender on the remote thru the camera , best be sure before throwing more money away
