Posts by stevejo

  • reader not restarting

    Your services file doesnt look correct though i have to say but that can be easy fixed shold be a exclamation ans the services in square brackets on my phone atm will see how you get.on

  • reader not restarting

    label = ***uk
    description = local
    protocol = internal
    device = /dev/sci0
    services = !hdblock
    caid = 0963
    detect = cd
    mhz = 500
    ident = 0963:000000
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-s = 1
    blockemm-g = 1
    saveemm-u = 1
    blocknano = all
    cccreshare = 1
    auprovid = 000963


    try this

  • reader not restarting

    What box is it you are running now you might need to drop the mhz to 500 and card mhz to 357


    - - - Updated - - -


    youll find autospeed on the reader near the mhz if required ,dependent on box type


    - - - Updated - - -


    also the hs requests get bumped as invalid it wont hang the router or hit the reader you will see it as invalid sid 0ms

  • reader not restarting

    I remember in the past my self and thatfellow a go at fixing you up and on the box you were running we had reader issues without autospeed enable this on the reader

  • freeze every minute then ecm goes to 5

    No if your seeing the box connected twice in users with a red 2 at the name you will need to sort the duo out , make sure your cccam,cfg is correct and there arent 2 duplicate lines , remove cccam from the box , delete it from usr/softcams , reboot the box a few times and then download cccam from the vix feeds again ,and enable it in softcam manager , I have seen this before on my own box where it was clearing 2 different channels and i was only watching one of them and not recording nor streaming , i stopped the user on the server and the requests stopped , i though i was going off my head but after doing what i said above it cleared , i am not using cccam anymore as I had too many issues with it and just run the boxes on oscam only now even as client

  • how to tell if you have a ps as a peer

    If you stand any chance of getting good peers its here buddy I dont think youll find a better concentration of actual hobbyists anywhere else ,you too are a genuine peer you came here asked question and took advice got cards and a dish setup ,so 10 points to you for not taking the easy route


    :thumb:

  • setting up twin tuner

    No they work seperate and have their own 12v output to feed power to the lnb


    - - - Updated - - -


    The only way to find whats wrong is by elimination , the feeds are ok , the lnb is then ok ,if you do a fresh flash and the issue is still there once both tuners are setup and you have a channel list it has to be on the box , its not your drive because you can record one channel ,the only other thing it can be is a faulty tuner


    - - - Updated - - -


    final test before all hope is lost is try it on a friends dish because i have heard of faults where an lnb only plays up once both feeds are connected to it


    I hope this helps you out

  • setting up twin tuner

    Hard to say from here , could be a tuner issue also , best thing to do is make a full backup and back up the settings as you are now , go into vix with the blue button /image manager press yellow for downloads get a new copy and flash your box go thru the basic setup and try again with 2 free channels before you bother with cams etc all you need to do is setup abm for a channel list and the tuners , i assume picture in picture wont work either if you watch say bbc1 and sly sports

  • how to tell if you have a ps as a peer

    It all depends what hes using buddy , if hes using oscam it doesnt matter what you put for reshare if hes not playing the game , I did say to you in the begging about dns and to use a few one for family one for good peers and one for new and untrusted ,i had also pointed out that you were already getting everything you needed and the only point of sharing is to get a full access to all you want to view and that there can be issues loading peers on in every 10 youll maybe got one or 2 good peers the rest just set out to milk you if they know you are new , so its up to you to decide when to stop and what to do , you can only decide if you have a peer worth having ,and what the risks are dumping peers and retaining the dns they were on


    - - - Updated - - -


    Not everyone is honest unfortunately we all find the chancers in the hunt for good peers , also the site you got this guy off if its the one i think the name says it all


    :13_002:


    - - - Updated - - -


    you can set anticascading but to be honest if you have peers that bad you need to do that there is no point having the peer

  • setting up twin tuner

    configuration mode=simple
    mode =single
    satellite =    28.e eutelsat/astra 2a/2e/2f
    send diseqe=no


    on both tuners



    - - - Updated - - -


    menu/setup/system/customise/ preffered tuner =auto


    - - - Updated - - -


    swap the feeds over on the back to make sure both are working


    if its a cline and not a local card try record 2 free channels first as your line might not allow decoding of 2 channels or multiroom as payservers put it

  • Oscam Help

    Not at the moment buddy im having a drink tonight , I cant see me being able to get it going I have given it a good shot already , if there is anyone else reading this thread and has an amiko alien 2 with a working uk card in it please have a look at this , the box is running e2 the cam is installed reader config is in cant get past atr errors when the card is starting , I dont run on of these maybe there is something im missing specific to alien boxes , have changed from dreambox to duckbox still the same , its almost as if the card in the reader has an atr not listed, it is detected , but thats all , its a white uk card with family pack , so if your in the mood for a challange have a shot if not ill try again in the morning when my heads clear
    :32_002: