Posts by stevejo

  • Is 1mb upload to slow for transcoding? Vu Solo 2 latest openvix image...

    Try setting the frame rate to 25fps more frames more data , and the rate to 1mb failing that 500kbit and in advance set resolution to 480p if its still bad 320x240 and see how you go ,1mb is the bare minimum really but on a phone its good enough , you can get a speedtest.net app to check your phones speed , i watch a slingbox pro at my work on my phone and it works ok on 3g but that alters the bit rate to suit the connection

  • Vu+ Uno Red Light

    One of the more recent posts ive see to do with problems flashing boxes it turned out to be the power supply but im not saying thats the issue pitty its not external it would be far easier to test

  • what card to get

    You are asking a question we are all looking for an answer to ***link is ok if you are able to sort a way to get an Indereto Ice card ,Viasat is good but way past £250 , the only cards I see getting hit in my foreign share are jsc canal+ sports and the porn cards a fair bit :) fox sports italy ,and canal france , not much else its all tightening up , peeps arent even watching bundasliga or calico

  • Which fixing would you use ?

    Quote from Toolunch

    ef87267f05.jpg


    This system Seems the same' Looks good but surely the load is on the thread so next question is the courser the better ?

    Your putting on t&k bracket and you wont get studding courser than a standard thread pitch m10=1.5mm pithch m12=1.75mm pitch and m14 and m16 are 2mm pitch you are probably going to use m12 at best the chemical fixing the deeper you go the more effective it is , dont go thru into the house though :) no need to get carried away youll be surprised how strong this is compared to standard roll bolts youll mangle your pole and t&k before you pull these out the wall if done properly , blow the dust out the hole with a straw and youll key to the brick better

  • Which fixing would you use ?

    Quote from Toolunch

    Thanks ! i already have those installed not sure if i could get these out and fill the hole with the chemical fixing ?

    They are sometimes hard to get out if they dont come out screw the bolt into it a bit and give it a hit in with the hammer to close the jaw then try pull it out the way , chemical fixing wont work with them as it will get round the thread and you never be able to take it down without an angle grinder i recommend that you use chemical fixing only with studding , there are complete kits including the stud bar on the site if you look ,

  • 1 channel fix

    Its not a image or box specific fault its to do with isp services blocking the sites ,best fix up a vpn if you want to be able to use it more often

  • Which fixing would you use ?

    You could use stud bar cut to your desired length and if its 12 mm lets say drill a 14-16mm hole in the wall and use chemfix and bond he studs into the wall best bet for crumbly walls , ive used it to mount machinery to concrete floors as you get a bond for the full legnth of the hole depth ,so the deeper you go the greater the bonding you get , im sure you get an epoxy one or an acrylic one both very fast drying


    Also is you have harling on your wall scrap some stones off other parts of he wall and fill the holes with clear silicon and put the chips over the silicon youll never know a hole was there

  • oscam not clearing

    Quote from eimear

    my friend has a *** card that he shares with his family in europe so they can still watch uk tv he gave me a line and it works on cccam but not on oscam it an nline with Suk on vuduo with vix 3.797.
    Where are the ports clashing?

    The nline port is 20000 and your newcamd port is 20000 for 0963 are you just running oscam to use his nline or do you have a local your self ?Also if you are running oscam/cccam why would you then need to put the line in an oscam reader rather than leave it in cccam and use it there where it is working? im sure your friend will let it get used on other boxes or give you more lines if this is the case , but it seems you are trying to fake a line and although this is easy done you wont get assistance on this site for that
    :taxman:

  • OSCAM on Android using Newcamd

    have to be honest there isnt much information on them i can find but i like android a lot on phones tablets and have loads of stuff for the kids a plan is hatching to get one of these for myself to play with ,I think is you were running oscam/cccam server rather than oscam alone you would be ok to connect or there would be a lot more posts with issues