Posts by stevejo

You need to get bt sports bt own espn now bud if you have bt broadband youll get it on *** cheap was free but not now

It will be night and day to the openbox look at the e2 plugins section and ts media you can add iptv urls

Check to see if you still have entitlements you may have been turned off

[reader]
label = JSC
description = JSC
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
mhz = 500
cardmhz = 600
ident = 0500:042400
group = 1
emmcache = 1,1,0
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 600
cccreshare = 1
audisabled = 1

Get an xp1000 you will be a lot happier at £129 you can do and watch a lot more things with it as far as streaming movies and plugins

Firstly you should read the site rules and post an introduction , and if you want your channels back put the card back into the sly box , your card will now be paired now this is a well known issue

if you have internet on the box the cccam active the cccam.cfg in the correct location and no pictures speak to who you share from

Quote from tomsta79

ive heard off a few people it might be the end of card sharing .. because *** are going to change there boxs and cards to stop all of this.. does any one no is there any truth in this matter:hell_boy:

Please post an introduction and follow the site rules Forum Gateway - Powered by DnP Firewall

:waaaht:

You wont be able to have 2 boxes controlling the motor , the best you could do is control the master box remotely on a mobile phone to position the dish for the second box but its just as fast to go do it at the master box , or you could add an arm and extra lnbs to the dish to give you satellites via a diseqc switch on the second box when the master is parked at you most used satellite , not aware of a better solution

After trying the solo 2 and having no issues at all changing an lnb swapping coax on tuners removing the feed thru the motor and going straight to the lnb still had the same issue although the solo 2 worked fine ? tried the dish next door worked fine with the duo 2 ?so at that point knew i had an issue with the house and my kit somewhere checked all connectors again solo 2 worked duo 2 not ran a dry lead to the dish the duo2 worked bearing in mind the solo 2 has worked all along while testing but in the past had an issue with tuning to boxnation that cleared so put it to a glitch somewhere software /drivers and for a few months has been fine till i swapped , the duo2 was ok a week ago did the updates apart from the reboot recordings issue that cleared i havent seen that again boxnation was still an issue on the dish with the duo 2 solo 2 fine so was ready to rip out all wiring but didnt think it was the coax , just strange why 1 box works and the other didnt , turns out it was the satellite face plate that was the issue however there must be a lot better or more tolerant tuner in the solo 2 every other channel and signal was fine and has not improved at all apart from the few stated , only thing i can think causing this might be the wifi being used in the duo 2 causing ingress at the face plate , hope this helps someone else get straight to the point of the problem if they get a similar issue , I have now just removed all the gubbins from the face plate and used barrels to joint the coax

Steve

Quote from thatfellow

Have you checked the signal strength on that frequency with sat finder?
Might just be that your LNB is slightly missalligned, had this issue recently with Irish channels & channel 4 channels on a friends satellite (while all other channels were perfect).
I used sat finder in the service searching menu to fine tune the LNB position & problem solved..

its all spot on with other channels and with my solo2 on the same dish and even lnb ports has to be a tuner fault 100% , still to test next doors dish with it , as a final test

Tried blackhole same issue so its hardware still to try another dish ,looks like a crap tuner as i found other horizontal channels doing it

Quote from pheonix

I dont have a Duo2 on which to test but i cant see how it would make a difference, I have it working on the following.

Vu+ Uno
Vu+ Ultimo
Vu+ Duo
Vu+ Duo LE
Vu+ Solo2
TM-TWIN-OE
TM-2T-OE

will also test it on my other box too when i have time but that one has yet to have a image officially released so cant name it. we would need to know more from other users of the Duo2 along with debug logs and softcam logs for these times in order to see whats going on, but yours is the first i have heard of this issue.

Display More

It actually is really mad whats happening is if you put it to boxnation and even press menu it flickers off and on the screen even the menu screen goes away and comes back repeatedly only the one channel ive been thru everything ,im going to try on the dish next door also it video it if need be but itll be getting punted back to WOS to be looked at , still to try a different image will do that soon

Quote from pheonix

I have no agenda but if you want fixes you first have to report the issues, rather than magically expect them to appear.

yes i run several receivers on ViX which are updated online every time a update is available and rarely encounter issues, i have never seen this recordings in process error except in cases where a recording was actually in progress while going down for a reboot, i'm not saying it does not happen but i have not seen it. as for box nation no problem what so ever here.

Display More

I see you are showing it working my solo 2 works duo 2 not , i will try a different image for the sake of trying but its not the dish or inputs had the boxes swapped around its annoying , this duo 2 has been the worst buy of the year so far will be selling it soon if this continues ,another solo 2 or hd2 i think

it must have been 2 or 3 builds before todays latest as ive tried a few times and its stopped ,but this is only on the duo 2 didnt test the solo 2 as serving other purposes build 734 now so lets at 730 didnt look what biuld i was on before checking for updates , still have a boxnation tune issue on duo 2

Oh i see i thought i was loosing my marbles with you saying it worked then next thing you had cccam have a nice night bud beer10

:waaaht:I though you were running oscam ??your title is stop lines in oscam also ffs lol

Good if you go to your readers you can do what you want with them there its easier this way

Quote from aScottishBloke

no mate dont see anything to do with oscam, all i see is all the channel lists , box settings etc etc

oscam webif should be 8888 normaly your on port 80 all the info is on the oscam conf file

Then you must see oscam ? what you seeing ?, lol got you thats not where you want to be lolololol , you need to find your port for oscam like i said port your on will be port 80 hehe try 192.168.1.99:8888 using your boxes ip address normal port is usualy 8888

are you talking about logged in via ftp bud ?