That's what I thought the cable had to look like Steve :laugh: I've not had time to tidy them up, I've been up and down them ladders more than a window cleaner
Its better you have plenty slack till you have it all setup the way you want then trim and tidy once its short its short
You must have been self harming in your younger days as a child 
:tinfoil:
- - - Updated - - -
dbf7788ea99e.jpg
Exhibit A a rough sketch via viber of a possible scenario ,I didnt mean take it literally lol
Holy F>>>>>> dont blame me for that birds nest , your skew on 13e or 19e needs to be moved over a bit 28e is normally about 11 degrees so 0.39 degrees per degree 28 will be correct to the dish it sits plumb to the dish and arm 13e should be 5.1 degrees and 19e 7.5 degrees 13 and 19 are neck and neck skew 19e towards 28e .
You should stick the switches at the back of the dish so its all not seen
:laugh:
Installing on nand is better , I did this and used a 256gb micro sd card for recordings and downloads and you can still bang it in the pc to load stuff on faster than over the network
Would have saved time doing that earlier lol., glad you have found the issue
Very nice always great to see something totally different :bravo:
Display More" im still convinced its not the wetek , failing that get a priest to throw holy water all round your house and do an exorcism cos you have the wetek demon there"
lol.........that's the best suggestion yet mate, the exorcism i mean.
i think it is the wetek in as much the network software, but i don't think the device is faulty.
best regards: canthackit
you have done a fresh flash of 5.0.8 if it was software on the wetek we would all suffer this fate ,you have a valid ip in network also so to be honest , until you try another router and or network at a mates house and or try the other wetek there really no way of proving it , it might all be down to either your router or pc but i have doubts its the wetek or wetek software can you connect via android ?you need to try all angles before second guessing , i have seen routers in the past that just wont entertain ftp and other protocols
open the other one and test it , but i think you will get the same result but it will rule out the first wetek ,if it does work then you know for sure its the wetek ,acid test nothing more you can do , id go to a mates house and try it on another router/network though , im still convinced its not the wetek , failing that get a priest to throw holy water all round your house and do an exorcism cos you have the wetek demon there
:laugh:
hi toothfairy i will do it for £80 including postage first class hows that sound to you ?
Thats not a haggle m8 your still at the same price you started at :snicker:
Have you tried connecting from another pc/laptop , this can only be a software issue , try another pc and a fresh install of WinSCP , disable any antivirus programs ,only thing i can think of as this is a very uncommon issue ., if that fails try another router it doesnt even have to be connected to the internet boot it up and hook your pc and wetek to it ,and try it again on the new ip address assigned , one of these has to work and solve the puzzle
It cant be the wetek on both wired and wireless , what are you showing in openelec network/connections do you see a valid ip address
- - - Updated - - -
did you enable ssh on initial setup where you see samba
aye that should be ok
navi x has it lined up , im sure most have booked it on sportsboxoffice now though , not worth the gamble hoping for free feeds too big a fight
You get 7 days cooling period to cancel but cant see it working lol, chances are youll loose premium sd
Not no more mate :(
aye it is try type the numbers into the box and submit
Thy all seem to be ok now mate I've used above file.
Ok if you spot any just post here and ill look at sorting them soon as i have a little time
This is what i do with the box
blind scan 28 e
use all satellites button
select 28e
test and note all new working you need to replace in the list , this also gets it into the left of fav edit
go into fav edit
press fav to change right colunm to what you need to fix
select the non working on right and delete it
select working on left and move it to the fav on right itll go to the end of the list always
repeat for all bouquets
then load one by on the fav you edited in normall tv function once in that list you can go to channel edit
in there move all the new channels you repaired to the normal position in the list
remember to say yes to save and exit every time
once done reboot the box before you save your list to usb
Ajsat list with I think all the fixes maybe not much time to rake thru all post whats wrong still , atlantic, arts 1 and showcase fixed
Sky arts 1 and showcase is all i can find wrong so far
you need to scan then edit favs note what number they were in all/satellites button top right on remote the delete and move them to the correct list it can be done on the box its self , ill give it a try later load that list and let me know what your missing , if you happen to do it upload the list for others but reboot your box to save all changed before dumping to usb
