thanks for your share.
May I know what are the different between komplett-minimal and komplett-minimal-compressed which is available for each version ? komplett-minimal-compressed size lots smaller compare with komplett-minimal... any different in functionality ? TQ:14_002:
Posts by DeepImpact
-
-
Tested with OpenSpa 4.0.002 BUT!!! It will not work with the modded pti.ko - you must use the original pti.ko (np) from the image.
Not a direct method yet, but a workaround using a stream relay from oscam-emu. You have to setup an IPTV streaming service which connects to your local box's oscam-emu (default port 17999) which then connects to the local box's streaming port (default 8001). But it is ALL done on the receiver without any need for PC to decode...
Basic steps.
1. Compile oscam with oscam-emu patch with minimum settings DVBAPI, EMU, and CLOCKFIX enabled.
(or use the attached version - NOTE: it was compiled with only basic emu for testing!)2. Basic oscam.conf file:
Code
Display More[global] logfile = stdout nice = -1 waitforcards = 0 [dvbapi] enabled = 1 delayer = 60 user = user1 boxtype = ipbox [webif] httpport = 8888 httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
3. Basic oscam.server file:
Code
Display More[reader] label = oscam_emu protocol = emu device = Emulator caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1 detect = cd ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000 group = 1 emmcache = 1,2,2,1 emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000000
4. Add SoftCam.key file to oscam config directory:
5. Enable the "Include ECM in http streams" setting. OpenWebif -> Settings -> Customize
6. Yon can now test with VLC and connect to port 17999 instead of 8001. Some examples for AFN on 9.0E:
Code
Display More#EXTM3U #EXTINF:-1,Atlantic http://192.168.1.11:17999/1:0:1:2:1:9:5A0000:0:0:0: #EXTINF:-1,Pacific http://192.168.1.11:17999/1:0:1:4:1:9:5A0000:0:0:0: #EXTINF:-1,Movie http://192.168.1.11:17999/1:0:1:A:1:9:5A0000:0:0:0: #EXTINF:-1,HD SPORTS http://192.168.1.11:17999/1:0:1:B:1:9:5A0000:0:0:0: #EXTINF:-1,Spectrum http://192.168.1.11:17999/1:0:1:3:1:9:5A0000:0:0:0: #EXTINF:-1,CH 8 http://192.168.1.11:17999/1:0:1:8:1:9:5A0000:0:0:0: #EXTINF:-1,Fam/Pulse http://192.168.1.11:17999/1:0:1:9:1:9:5A0000:0:0:0: #EXTINF:-1,Guide http://192.168.1.11:17999/1:0:1:7:1:9:5A0000:0:0:0: #EXTINF:-1,News http://192.168.1.11:17999/1:0:1:5:1:9:5A0000:0:0:0: #EXTINF:-1,Sports http://192.168.1.11:17999/1:0:1:1:1:9:5A0000:0:0:0: #EXTINF:-1,Sports2 http://192.168.1.11:17999/1:0:1:6:1:9:5A0000:0:0:0:
7. To connect directly from box, use dreamboxedit to add IPTV streams to a bouquet with following settings:
CodeStream Type :DVB/TS Name: (example HD SPORTS - local stream) URL: (url with localhost and port 17999 - example http://127.0.0.1:17999/1:0:1:B:1:9:5A0000:0:0:0) Service Type :1 Service ID : 11 (must be DECIMAL - example from above url "B" -> 11) Transponder ID : 99 (doesn't matter) Network ID : 99 (doesn't matter) Namespace: 99 (doesn't matter)
I only tested on AFN channels on 9.0E. CPU usage was only %10-%15!
thanks for sharing !!!
I try and emu are working.But my Oscam only open emu channel now with above file, others cline channel in my oscam are not working,only emu reader are connected, others are 'unknow' status.May i know how should i set oscam.server and oscam.conf file in order to make my cline working again with Oscam ? thanks !! -
As far as i'm aware, that will do.
I don't think you need keys as oscam is patched (i'm not familiar with using keys to be honest) but have a look here:
http://linuxsat-support.com/showthread.php?t=15026
Also, oscam ymod can be found here:
http://linuxsat-support.com/showthread.php?t=10152
thank you friend.
unfortunately after i rename and replace oscam-svn10714-openpli40 to existing oscam(svn-8799) in /usr/bin chmod 755 my oscam no longer working... i need to try alternate way... thanks again for your reply.tq :) -
thanks for your help :) appreciate it :14_002:
I just download 'oscam-svn10714-openpli40-webif-ssl-oscam -emu-patched.zip' from 1 of the link you are mentioned :
http://linuxsat-support.com/showthread.php?t=82811&p=276720&viewfull=1#post276720May I confirm with you, what i need to do is rename the downloaded binary file 'oscam-svn10714-openpli40-webif-ssl-oscam-emu-patched' to existing installed oscam name, then ftp and overwrite that file to /usr/bin then chmod 755 will do right ? anythings else i need to modify to get it work ? and where should i put SoftCam.Key...? /etc/tuxbox/config...? thanks again !!!
-
Which version did you try to install?
It should be this one.
Yes,that's the one I installed.
I think might be my mistake, I just check my image information, it show Kernel version 3.2, so I just search around and seems like Kernel 3.2 are actually mean O.E 2.0 right ? if my box are currently running O.E 2.0 OpenPLi 4.0 image, can you guide me or give me link for latest /stable version of Oscam with EMU function ? thanks again.
P/S: attach with my current firmware info.tq
d7857f9a5ce40b5.jpg -
Give our addons panel a go.
You should be able to download cams (also channel lists etc) to your receiver from it:
You can find the panel here
thanks for your help.
I just install the addon as your guide and it show installation successful n need to restart E2, but after restart then go in plugin menu it give me this screen and linuxsat add on are not there... any idea ?c0ba220bec04ddd.jpg -
Dear all, I need your help.
I've been looking and asking help in this forum several section (Oscam support,Oscam Files,Emulator...etc) for pass few week just wanted to get a Oscam with EMU function which is working for OpenPLI 4.0 (O.E 1.6) but seems like no one reply at all including admin...
Am I asking in a wrong section and cause no one want to reply; or there is no Oscam with EMU function which can use on OpenPLI 4.0 O.E 1.6 image ? Anyone can help and clarify...? Thanks in advance !!http://linuxsat-support.com/showthread.php?t=85450
http://linuxsat-support.com/showthread.php?t=85648
http://linuxsat-support.com/showthread.php?t=85963 -
Oscam-EMU svn10656 For Various Images
thank you friend, may I know is 'enigma2-plugin-softcams-oscam-emu-svn10656_openpli_4.0_all.rar' you provide are able to use on OpenPLi 4.0 image OE 1.6 or only can be use on OE 2.0 ? I'm currently using Sunray SR4 with OpenPLi-4.0-beta-dm800se SSL #84d by gjstroom (September 2013 build OE 1.6 i believe) image... i got your link from my another post @ http://linuxsat-support.com/showthread.php?t=82679
thanks in advanced !! -
I tried to compile a patched mipsel version with simplebuild, but it fails everytime. If you can find an oscam-emu binary for OE 1.6, i would be happy to make an ipk for you to try.
thanks bro, but i'm don't know where to find that files u r mention... :( i try to look around n see... thanks ya !! -
The oscam binary used was for OE 2.0 images, so i`m not sure if it will work on the older images.
thanks for ur reply.Do u still keep any Oscam emu (able to read Softcam.Key) for older openpli 4.0 OE 1.6 like mine one ? as long as can work will do :) thanks again
-
Default config directory path is /etc/tuxbox/config
Not for SH4 receivers.
No live keys included.
Dear master G.
May I know is 'enigma2-plugin-softcams-oscam-emu-svn10656_openpli_4.0_all.ipk' you provide are able to use on all OpenPLi 4.0 image regardless OE 1.6 or newer version ? I'm currently using Sunray SR4 with OpenPLi-4.0-beta-dm800se SSL #84d by gjstroom (September 2013 build) image... Can i install the mentioned ipk file from your link ? thanks and hope you can help me on this :) -
Dear all, there are few .mvi files in usr/share... may i know which .mvi file i need to replace if i only need to change the very 1st screen/image when i switch ON my box ? thanks in advanced.
-
Dear all, i'm new to Vu+ STB and i need your guide.... Previously using DM800 and currently on DM800SE.
I'm planning to get my self a new Solo2, but i need to check with you guys, is Solo2 support (able to scan signal) from transponder which are using Physical Layer Signaling + Input Stream Identifier system ? I'm did tried to scan it with my current STB (Dreambox) and some others STB like Openbox,sk-ybox...etc all are not able to scan (get) those signal/channel which are using Physical Layer Signaling + Input Stream Identifier system..... the only 'know' STB which are able to do it at the moment is the latest 'Chinese Clone DM800SE SR4'..... I'm wondering is any member here try it with Solo2 ? mind to share what's the outcome ? thanks in advance.